Life Science Instruments
Filter
Showing 2131–2160 of 2783 results
| Brand | Peiou |
|---|---|
| Origin | Shanghai, China |
| Model | SKD-100 |
| Housing Material | Monolithic ABS engineering plastic |
| Sample Capacity | ≤5 g (solid) or ≤15 mL (liquid) per run |
| Distillation Time | 3–8 min/sample |
| Nitrogen Measurement Range | 0.1–240 mg N |
| Alkali Addition Time | 0–99 s |
| Distillation Duration Setting | 0–99 min |
| Distillate Flow Rate | 14–28 mL/min |
| Heating Power Adjustment | 750–1500 W |
| Data Storage | 10 programmable distillation/alkali-addition protocols |
| Recovery Rate | >99.5% |
| Repeatability | RSD ≤0.5% |
| Safety Features | Real-time liquid-level monitoring, dry-run protection, overpressure relief, emergency stop |
| Compliance | Designed for ISO 8968, AOAC 981.10, and ASTM D1122-compliant workflows |
| Brand | Peiou |
|---|---|
| Origin | Shanghai, China |
| Model | SKD-200 |
| Measurement Range | 0.1–240 mg N |
| Nitrogen Recovery Rate | >99.5% |
| Repeatability | ≤0.5% CV |
| Sample Capacity | ≤6 g (solid) or ≤16 mL (liquid) |
| Distillation Time | 0–99 min (programmable) |
| Distillation Speed | 3–8 min/sample |
| Alkali/Acid Delivery | Pressure-driven constant-pressure dosing system |
| Cleaning Mode | Automated post-distillation rinse cycle |
| Safety Protection | Dry-run detection with automatic water-level cutoff |
| Operating Modes | Auto & Manual |
| Display | LED digital interface |
| Method Storage | 10 programmable methods (alkali volume, acid volume, distillation time) |
| Compliance | GB/T 10511–1989, GB/T 2441.1–2001, GB 10209.1–2001, GB/T 3595–2000 |
| Brand | Peqlab |
|---|---|
| Origin | Germany |
| Model | Perfect Blot |
| Instrument Type | Nucleic Acid Hybridization Incubator |
| Temperature Range | Ambient +5°C to 80°C |
| Temperature Uniformity | ±0.1°C |
| Rotation Speed | 4–20 rpm |
| Chamber Capacity | 12 large or 24 small hybridization tubes |
| External Dimensions | 48.3 × 44.5 × 49.5 cm |
| Internal Dimensions | 36.8 × 27.9 × 34.3 cm |
| Weight | 26.8 kg |
| Brand | PerfuseCell |
|---|---|
| Origin | Germany |
| Model | Perfuse Cell |
| Reactor Count | 12 |
| Vessel Material | Stainless Steel (316L) |
| Working Volume Range | 0.1–25 L (configurable per module) |
| Conductivity Sensor Range | 1–200 mS/cm |
| Sensor Type | 4-Electrode Pt1000-Integrated ConducCell |
| Pump Integration | Thalia A-SUP (alternating tangential flow) & Clio O-SUP (unidirectional TFF) |
| Compliance | ISO 13485, ASTM E2500, USP <1043>, FDA 21 CFR Part 11-ready software architecture |
| Brand | PerkinElmer |
|---|---|
| Origin | USA |
| Model | N9300802 |
| Voltage | 115/230 V |
| Sample Capacity | 50 mL per well |
| Block Configuration | 24-position |
| Coating | PTFE-coated graphite |
| Compatibility | SPB Series sample preparation blocks |
| Manufacturer Type | Authorized distributor (original equipment manufactured in USA) |
| Brand | Pharmag |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Biconical Mixing |
| Pricing | Upon Request |
| Construction Material | Stainless Steel |
| Total Volume | 5 L |
| Usable Volume | 3 L |
| Principle | Free-flow mixing via biconical drum rotation |
| Sample Type Compatibility | Free-flowing powders and granules |
| Brand | Pharmag |
|---|---|
| Origin | Germany |
| Model | Cube Mixing |
| Capacity Range | 3–12 L |
| Construction Options | Stainless Steel or Resin Cubes |
| Drive Mechanism | UGD Gear-Driven Inversion System |
| Motion Type | Gentle, End-Over-End Rotational Tumbling |
| Brand | Pharmag |
|---|---|
| Origin | Germany |
| Distributor Type | Authorized Distributor |
| Import Status | Imported |
| Model | CUB-2000 Series |
| Capacity | 2 L (dry solids), 3 L (wet/dispersed samples) |
| Motion Principle | 3D Tumbling Rotation |
| Application Scope | Powder & granule blending, coating processes, dyeing matrix homogenization, resin drum mixing |
| Brand | Pharmag |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | DGM-Series |
| Throughput | 20 kg/h |
| Dimensions | 360 × 270 × 600 mm |
| Construction Material | 316 Stainless Steel Rollers with Helical Grooves |
| Control Interface | LCD Touch Panel |
| Roller Speed | Adjustable (0–25 rpm) |
| Compliance | Designed to Support GMP-Aligned Manufacturing Environments |
| Brand | Pharmag |
|---|---|
| Origin | Germany |
| Model | High-Speed Mixer |
| Capacity | 5 L (3–4 L operational) |
| Construction | Electropolished stainless steel drum, blades, and cam coupling |
| Safety | Electromagnetic lid interlock with automatic motor shutdown |
| Drive | UAM motor with tension-ring coupling |
| Mixing Principle | Asymmetric pear-shaped tumbling motion |
| Brand | Pharmag |
|---|---|
| Origin | Germany |
| Model | L-Series Liquid Mixer |
| Construction | Stainless Steel (316L) Mixing Vessel & Arm |
| Total Volume | 5 L |
| Usable Volume | 3 L |
| Drive Type | Brushless DC Motor with Digital Speed Control |
| Speed Range | 50–1,200 rpm (adjustable in 1 rpm increments) |
| Torque | Up to 15 N·cm (constant at low speeds) |
| Compliance | CE-marked, conforms to IEC 61000-6-2/6-4 EMC standards, IP54 rated enclosure |
| Brand | Pharmag |
|---|---|
| Origin | Germany |
| Model | Pear-Knife Mixer |
| Capacity | 12 L (total), 7 L (usable) |
| Construction | Stainless steel blade and mixing trough |
| Adjustable tilt angle | 0–180° |
| Application | Dry powders, granules, ointments, emulsions |
| Distribution status | Imported via authorized distributor |
| Pricing | Available upon request |
| Brand | Pharmag |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | P-Series |
| Speed Range | 5–50 rpm |
| Pan Diameter | 400 mm |
| Tilt Angle Adjustment | 0–90° |
| Construction Material | Stainless Steel (AISI 316L) |
| Drive System | Gear-driven, clockwise rotation with UGD precision gearbox |
| Control | Manual mechanical adjustment of speed and tilt angle |
| Brand | Pharmag |
|---|---|
| Origin | Germany |
| Model | Planetary Mixer |
| Capacity | 5 L total / 3.5 L working volume |
| Construction | Stainless steel vessel and mixing tools, PTFE-coated scraper blades |
| Mixing tool options | Kneading arms, paddle mixers, homogenizing impellers |
| Application scope | Ointments, pastes, gels, suspensions, powders, and low-to-medium viscosity liquids |
| Distribution model | Authorized distributor for EMEA and APAC regions |
| Compliance | Designed to meet ISO 13485-aligned manufacturing practices and supports GMP documentation workflows |
| Brand | Pharmag |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Suppository Filling |
| Pricing | Upon Request |
| Production Capacity | Up to 4,000 units/hour (dependent on formulation rheology and mold geometry) |
| Total Tank Volume | 5 L |
| Usable Working Volume | 3–3.5 L |
| Blade Orientation | Manually Adjustable |
| Brand | Pharmag |
|---|---|
| Origin | Germany |
| Model | UAM |
| Speed Range | 40–400 rpm (continuously adjustable) |
| Gear Ratio | 1:3.42 |
| Power Rating | 700 W |
| Input Voltage | 100–240 V AC, 50/60 Hz |
| Control Interface | Touchscreen panel with 10 programmable protocols |
| Design | Modular, tool-agnostic drive platform for pharmaceutical process equipment |
| Brand | Pharmag |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | WGL-Series |
| Output Capacity | 25–30 kg/h |
| Rotor Configuration | 6-piece high-strength stainless steel rotors |
| Oscillation Angle | 90° |
| Standard Sieve Mesh Sizes | 1.0 mm and 1.6 mm |
| Optional Sieve Mesh Sizes | 0.315 mm, 0.355 mm, 0.63 mm, 0.8 mm, 1.0 mm, 1.25 mm, 1.6 mm, 2.0 mm, 2.5 mm, 3.15 mm |
| Brand | Pharmag |
|---|---|
| Origin | Germany |
| Model | Y-Shaped |
| Construction | 316 Stainless Steel Mixing Drum |
| Total Capacity | 4.5 L |
| Usable Volume | 2 L |
| Type | Orbital Rotary Mixer for Solid & Semi-Solid Materials |
| Brand | PHCbi |
|---|---|
| Origin | Japan |
| Instrument Type | Air-jacketed CO₂ Incubator |
| CO₂ Detection | Dual-channel Infrared (IR) Sensor |
| Temperature Control Range & Accuracy | RT +5°C to 50°C, ±0.1°C |
| Temperature Uniformity | ±0.25°C |
| CO₂ Concentration Control Range & Accuracy | 0–20% vol, ±0.15% vol |
| Humidity Control | 95% RH (±5% RH, natural evaporation via humidification pan) |
| Chamber Capacity | 170 L |
| External Dimensions (W×D×H) | 620 × 730 × 905 mm (MCO-170AICL / MCO-170AICUVHL) or 620 × 755 × 905 mm (MCO-170AICUVL) |
| Key Configurations | SafeCell UV Sterilization System, H₂O₂ Decontamination Module with Generator & Reagent, Password-protected Electronic Outer Door Lock, Independent Inner Door Kit, CO₂ Pressure Regulator, Automatic CO₂ Cylinder Switching System, Standard Gas Auto-Calibration Kit, Copper-Alloy Stainless Steel Shelving & Half-Width Dividers, Stackable Mounting Brackets, Castor Base |
| Brand | PHCbi |
|---|---|
| Origin | Japan |
| Instrument Type | Air-Jacketed CO₂ Incubator |
| CO₂ Detection | Dual Infrared (IR) Sensors |
| Temperature Control Range & Accuracy | RT+5°C to 50°C, ±0.1°C |
| Temperature Uniformity | ±0.25°C |
| CO₂ Concentration Control Range & Accuracy | 0–20%, ±0.15% |
| Humidity Control | 95% RH ±5% RH (Natural Evaporation via Humidification Pan) |
| Chamber Capacity | 230 L |
| External Dimensions (W×D×H) | 770 × 730 × 905 mm |
| Standard Configuration | SafeCell UV Sterilization System, H₂O₂ Decontamination Plate, Password-Protected Electronic Door Lock, Integrated H₂O₂ Generator & Reagent Kit, CO₂ Pressure Regulator, Automatic CO₂ Cylinder Switching System, Standard Gas Auto-Calibration Kit, Copper-Alloy Stainless Steel Shelving, Copper-Alloy Stainless Steel Half-Width Partition, Stackable Mounting Brackets, Castor-Mounted Base |
| Brand | PHCbi |
|---|---|
| Origin | Japan |
| Model | MDF-MU339HL / MDF-MU539HL |
| Storage Temperature Range | –20 °C to –40 °C |
| Power Consumption | 200 W |
| External Dimensions (D×W×H) | 616×770×1802 mm (MDF-MU339HL-PC) / 793×770×1802 mm (MDF-MU539HL-PC) |
| Cooling Method | Direct Cooling |
| Net Weight | 122 kg (MDF-MU339HL-PC) / 144 kg (MDF-MU539HL-PC) |
| Refrigerant Type | Natural Refrigerant (R290/R600a blend) |
| Compressor Control | Inverter-Driven |
| Brand | -- |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Region of Manufacture | Domestic (PRC) |
| Model | PhenoTron® PTS |
| Pricing | Upon Request |
| Brand | SCChengyi |
|---|---|
| Model | PHG-1 |
| Temperature Range | Ambient to 100°C |
| Max Heating Power | 350 W |
| Heating Time (Ambient → 38°C) | <10 min |
| Operating Voltage | AC 220 V, 50 Hz |
| Temperature Control Accuracy | ≤0.2°C |
| Display Resolution | 0.1°C |
| Dual Display | Actual & Set Temperature |
| Dual Preheating Reservoirs | 45 mL and 200 mL |
| Preheating Glass Tubes | Three 20 mL + One 60 mL Quartz Tubes |
| Leakage Protection | 10 mA Trip Current |
| Brand | PicoQuant |
|---|---|
| Origin | Germany |
| Model | FluoMic |
| Instrument Type | Upright Fluorescence Microscope |
| Excitation Source | Pulsed and CW Lasers (375–1060 nm) |
| Detection Range | 400–1700 nm |
| Spatial Resolution | ≤2 µm |
| Lifetime Measurement Range | ~ps to ms (TCSPC-based) |
| Focus Mechanism | Motorized |
| Control Interface | SymPhoTime 64 & EasyTau 2 Software |
| Compatible Microscope Stands | Olympus BX43, BX53(-P), BX63, BXFM |
| Scan Options | Optional XY/XYZ piezo stages (75 × 75 mm to 80 × 80 × 80 µm range) |
| TCSPC Electronics | PicoHarp 330 / MultiHarp 150 / TimeHarp 260 Pico |
| Detector Options | PMT (PMA-C), Hybrid PMT (PMA Hybrid), InGaAs SPAD (MPD, Excelitas) |
| Spectral Selection | FlexWave wavelength selector (1–80 nm bandwidth, 0.1 nm step, >80% transmission) |
| Brand | Argus |
|---|---|
| Origin | Germany |
| Model | PiCUS TreeQinetic |
| Application | Non-destructive in-situ assessment of trunk and root anchorage stability under controlled tensile loading |
| Measurement Principle | Quasi-static mechanical displacement-based biomechanical response analysis |
| Key Components | Wireless elastometer (±2 mm, 0.1 µm resolution), dual-axis inclinometer (±15°, 0.002° resolution), digital forcemeter (0–60 kN, 0.01 kN resolution), overload indicator, Bluetooth-enabled data hub, and proprietary TreeQinetic software suite |
| Compliance | Designed for field use in accordance with DIN EN 1991-1-4 (wind actions), ISO 17225-6 (biomass stability reference frameworks), and GLP-aligned data integrity protocols |
| Power | Rechargeable Li-ion battery pack (10 h typical runtime at 20°C) |
| Wireless Range | Up to 30 m (line-of-sight, Bluetooth 5.0) |
| Mechanical System | Winch assembly rated for 2800 kg pulling force |
| Brand | Argus |
|---|---|
| Origin | Germany |
| Model | PiCUS TreeTronic 3 |
| Measurement Principle | Electrical Resistance Tomography |
| Max Electrode Count | 24 |
| Minimum Electrodes Required | 10 |
| Max Output Current | 20 mA |
| Max Output Voltage | 80 V |
| Measurement Modes | Two-point & Three-point |
| Electrode Cable Length | 3.5 m |
| Tree Diameter Range | 3–250 cm (extendable) |
| Onboard Storage | >100 scans |
| Display | Color LCD (real-time ERT visualization) |
| Data Transfer | USB 2.0 / Bluetooth |
| Integrated GPS & Bluetooth | Yes |
| Battery Life | >4 h continuous operation |
| Charging Time | ≤2 h |
| Weight | 8.9 kg |
| Dimensions | 55 × 42 × 13 cm |
| Optional Electronic Dendrometer | Range 160 mm–2150 cm, Stainless Steel Construction, LED Display, Bluetooth Sync |
| Brand | Planelight |
|---|---|
| Origin | Spain |
| Model | QLS-scope |
| Light Sheet Technology | Uniform, tunable-thickness light sheet (1 µm) |
| Field of View (FOV) | 0.2–8 mm |
| Maximum Sample Dimensions | 25 × 25 × 25 mm |
| Objective Lenses | 1×, 2×, 7.5×, 10×, 20× (water immersion), 40× (water immersion), motorized variable magnification |
| Imaging Modes | Single-angle, dual-angle, quad-angle, SPOT (500-angle rotational acquisition), Z-Motor scanning |
| Acquisition Speed | 7–10 ms per plane |
| Autofocus | Real-time focal plane correction during acquisition |
| Sample Chamber | Motorized, adaptable for varying sample sizes and compatible with CO₂ incubators |
| Imaging Media Compatibility | Aqueous and organic clearing agents |
| Required Imaging Medium Volume | 20 mL |
| Vibration-Free Sample Handling | Active stabilization for soft or delicate specimens |
| Brand | COMECAUSE |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | IN~GXY |
| Optical Resolution | 4800 × 9600 dpi |
| Image Acquisition Time | 8 s per scan |
| Sensor | High-Sensitivity CCD |
| Illumination | Uniform LED Array |
| Single-Scan Width | 216 mm |
| Single-Scan Depth | 297 mm |
| Color Depth | 48-bit |
| Scan Chamber Dimensions | Dual-Sided, 280 × 58 × 1000 mm & 280 × 58 × 500 mm |
| Power Supply | External 68,000 mAh Li-ion Battery Pack |
| Integrated Laptop | 13th Gen Intel® Core™ i5-13420H, 15.6" FHD Display, 16 GB DDR5 RAM, 512 GB PCIe NVMe SSD |
| Brand | PM-Tech |
|---|---|
| Origin | Germany |
| Model | RTC-V17 |
| Camera Resolution | 17.8 MP RGB |
| Imaging Area | 55 mm (W) × 40 mm (H) |
| Light Sources | White, Red, Green, UV (software-controlled intensity) |
| Power Supply | 5 V DC via USB |
| Operating Temperature | 0–50 °C |
| Relative Humidity | 0–100% RH (non-condensing) |
| Image Acquisition Time | <1 s |
| Integrated Sensors | 12-bit temperature sensor (−50 to +85 °C), water immersion detection with auto-shutdown |
| Software Modes | Pregizer / Topology / Custom topology |
| Data Export | CSV, Excel-compatible formats |
| Language Support | English, Simplified Chinese, Traditional Chinese |
| Brand | PMS |
|---|---|
| Origin | USA |
| Model | 1515D |
| Measurement Range | 0–100 bar |
| Accuracy | ±1% of reading (at 50 bar, half-scale) |
| Chamber Material | Stainless Steel |
| Chamber Internal Dimensions | 6.35 cm ID × 12.7 cm depth |
| Display | Digital backlit pressure gauge with selectable units (bar, MPa, psi) |
| Gas Supply | Integrated 20 ft³ aluminum nitrogen cylinder (max pressure 207 bar) |
| Weight | ~16 kg (instrument only) |
| cylinder | 3.9 kg |
| Overall Dimensions | 56 × 38 × 26 cm |
| Seal Options | Standard 6.35 mm compression seal |
| Accessories | 7× and 3.5× magnifying eyepieces (AAA-powered), LED-illuminated 10× handheld eyepiece, gas-saver valve (full- or half-range), sample insertion tools (1/8", 3/16", 1/4" OD), reusable moisture-equilibration sample bags (species-specific sizing), stainless steel chamber base caps (9.525 mm, 12.7 mm, grass-leaf) |