- All
- Favorite
- Popular
- Most rated
| Brand | MonTech |
|---|---|
| Origin | Germany |
| Model | MDR 3000 |
| Standard Compliance | ISO 6502, ASTM D5289, DIN 53529 |
| Cavity Type | Sealed Dual-Conical |
| Drive System | Direct-Drive DC Servo Motor |
| Oscillation Frequency | 1.667 Hz |
| Amplitude Range | Software-Controlled ±0.01° to 5° (mechanical fixed option: 0.5°) |
| Temperature Range | Ambient to 232 °C |
| Measured Parameters | Torque (dN·m), Temperature (°C), Frequency (Hz), Strain (%), Derived Moduli (S′, S″, S*, tan δ) |
| Cavity Material | Hardened & Polished Stainless Steel |
| Enclosure | Anodized Aluminum Alloy Housing |
| Control Interface | Dedicated PC with MonControl v5.x (32-bit Windows-based Analysis Suite) |
| Data Output | Real-time torque/temperature curves, modulus profiles, cure kinetics (ts1, tc50, tc90), hysteresis analysis |
| Brand | MonTech |
|---|---|
| Origin | Germany |
| Model | M-VS 3000 |
| Cutting Die Diameter | 45 mm |
| Max. Sample Thickness | ≤ 20 mm |
| Volume Reproducibility | ±0.1 % |
| Nominal Sample Volume | ~15 cm³ |
| Adjustable Cutting Cycle Time | 1–15 s |
| Dimensions (H×W×D) | 600 × 430 × 380 mm |
| Net Weight | ~50 kg |
| Minimum Operating Air Pressure | 5.0 bar |
| Brand | MonTech |
|---|---|
| Origin | Germany |
| Model | V-MV 3000 |
| Standards Compliance | ISO 289:2005, ASTM D1646, DIN 53523, DIN 53525 Parts 1–3, BS 903 Part A58, AFNOR T43-00/005, JIS K6300, GOST 10722–76 |
| Rotor Options | Large rotor (38.10 mm), Small rotor (30.48 mm) |
| Rotational Speed Range | 0–50 rpm, adjustable in 0.01 rpm increments |
| Temperature Range | Ambient to 232 °C, control accuracy ±0.03 °C |
| Measurement Units | Mooney Units (MU), °C / °F, time (min:min or min:sec) |
| Test Modes | Mooney viscosity, Mooney scorch, stress relaxation, mold release evaluation, Delta Mooney, variable Mooney, stepwise stress relaxation, programmable multi-step test sequences |
| Sealing | Long-life precision sealing system |
| Application Scope | QC, R&D, and production fast-check for raw rubber, compounded elastomers, and thermoplastic elastomers (TPEs) |
| Brand | MonTech |
|---|---|
| Origin | Germany |
| Model | MV 3000 |
| Standards Compliance | ISO 289:2005, ASTM D1646, DIN 53523, BS 903 Part A58, JIS K6300, GOST 10722–76 |
| Rotor Options | Large rotor (38.10 mm), Small rotor (30.48 mm) |
| Rotational Speed | 2 rpm ± 0.02 rpm |
| Temperature Range | Ambient to 232 °C |
| Temperature Accuracy | ±0.03 °C |
| Measurement Units | Mooney Units (MU), °C / °F, min:min or min:sec |
| Test Modes | Mooney Viscosity, Mooney Scorch, Stress Relaxation, Mold Release Performance, Delta Mooney |
| Sealing | Long-life elastomeric seal assembly |
| Control System | Digital microprocessor-based PID temperature and torque control |
| Brand | MonTech |
|---|---|
| Origin | Germany |
| Model | PO 3000 Plastometer Aging Oven |
| Construction | Stainless Steel Enclosure |
| Heating Chambers | 4 Independent PID-Controlled Zones |
| Temperature Range | Ambient to 200 °C (Standard Operating Point: 140 ± 0.2 °C) |
| Temperature Recovery Time | ≤ 1 min after Sample Insertion |
| Max. Sample Capacity | 48 specimens (12 per Tray × 4 Trays) |
| Air Exchange Rate | 0–120 air changes/hour (adjustable) |
| Chamber Dimensions (W × H × D) | 500 × 120 × 280 mm |
| Max. Power Consumption | 2.5 kW |
| Compliance | ASTM D3194, BS 903-A59 |
| Safety Features | Overheat Protection, Stability Monitoring, Timeout Alert |
Show next