NDT Instruments/Equipment
Filter
Showing 121–150 of 266 results
| Brand | COMECAUSE |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | OEM Manufacturer |
| Country of Origin | China |
| Model | IN-CTS3 |
| Instrument Type | Digital Ultrasonic Flaw Detector |
| Inspection Method | Pulse-Echo & Through-Transmission |
| Waveform Mode | Continuous Wave (CW) and Pulsed Wave (PW) |
| Application Sectors | Aerospace, Power Generation, Petrochemical, Pressure Vessel, Rail Transit, Automotive, Structural Steel |
| Scan Range | 0–10000 mm |
| Gain Adjustment | 0–110 dB |
| Vertical Linearity Error | ≤2.5% |
| Horizontal Linearity Error | ≤0.1% |
| Dynamic Range | ≥32 dB |
| Resolution | ≥40 dB |
| Probe Types Supported | Single-Crystal & Dual-Crystal |
| Frequency Range | 0.5–20 MHz |
| Sensitivity Margin | ≥60 dB (200 mm depth, Ø2 mm flat-bottom hole) |
| Material Sound Velocity Range | 1000–9999 m/s |
| Echo Suppression | 0–80% |
| Operating Temperature | −27°C to +70°C |
| Dimensions | 240 × 160 × 40 mm |
| Weight | 1.3 kg |
| A-scan Storage Capacity | 980 frames |
| Channel Memory | 16 user-configurable inspection channels |
| DAC/AVG Curve Generation | Automatic (via standard test blocks) |
| Weld Diagram Modes | I-, V-, U-, and X-type schematic overlays |
| Defect Sizing | Equivalent reflector diameter (φ) calculation |
| Data Interface | USB 2.0 for PC connectivity and report export |
| Display | High-brightness TFT LCD, sunlight-readable |
| Brand | Haytham |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | 200X |
| Pricing | Available Upon Request |
| Brand | Doppler |
|---|---|
| Model | Doppler-3 |
| Origin | Guangdong, China |
| Detection Principle | Phased Array Ultrasonic Testing (PAUT) with Immersion Technique |
| Scan Mode | B-scan |
| Probe Type | Concave Linear Phased Array Probe (Configurable: 2.5–15 MHz, 64–256 elements) |
| Positioning Accuracy | ±0.05 mm |
| Cycle Time | ≤3 min per 1 m rod (high-resolution mode) |
| Compliance | Designed for ASME Section V Art. 4, ASTM E2700, ISO 16810, and nuclear-grade QA/QC workflows |
| Software | Real-time C-scan visualization, automated defect sizing & classification, statistical reporting (defect count, depth, length, amplitude), audit-trail-enabled data export |
| Automation Level | Fully integrated robotic handling (loading/unloading, rotational clamping, XYZ probe positioning), optional portable PAUT unit for manual verification |
| Application Domain | Nuclear energy components (fuel cladding, control rod sleeves, structural alloy rods) |
| Brand | Doppler |
|---|---|
| Model | Automated PAUT Water Immersion System |
| Origin | Guangdong, China |
| Motion Axes | X (800 mm), Y (600 mm), Z (400 mm) |
| Repeatability | < 0.05 mm/m (X/Y/Z) |
| Position Resolution | < 0.01 mm |
| Scan Speed | 1–500 mm/s |
| Operating Temperature | −10 °C to +40 °C |
| Software SDK Support | C++, C#, VB, VC, Delphi (source code provided) |
| System Components | PAUT instrument, industrial PC, multi-axis motion modules, immersion tank, custom probe fixtures, water circulation & filtration unit, control cabinet, mechanical frame |
| Compliance | Designed for ASTM E273, ISO 16810, and EN 13588-compliant ultrasonic inspection workflows |
| Application Focus | High-precision volumetric NDT of aluminum/copper cold plates in EV battery thermal management systems |
| Brand | Doppler |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | SAM-1 |
| Price | USD 280,000 (FOB Guangdong) |
| Application Field | Aerospace & Semiconductor Sputtering Target Manufacturing |
| Scanning Mode | B-scan |
| Transducer Configuration | Single-element immersion transducer |
| Motion System | High-precision XYZ linear motor-driven scanning stage |
| Water Tank | Heavy-duty stainless steel immersion tank (modular sizing: Small / Medium / Large) |
| Imaging Modes | A-scan, B-scan, S-scan, C-scan, Top-C-scan, 3D volumetric reconstruction |
| Data Acquisition | Full RF waveform + positional metadata synchronized at sub-millisecond resolution |
| Compliance | Designed to support ISO 17025-compliant workflows |
| Brand | Doppler |
|---|---|
| Origin | Guangdong, China |
| Model | SAM-450C |
| Scan Mode | B-scan |
| Transducer | Single-element focused transducer |
| Scan Volume | 450 × 300 × 120 mm |
| Maximum Image Resolution | 10,000 × 10,000 pixels (subject to configuration) |
| Max Scan Speed | 1200 mm/s |
| Ultrasonic Frequency Range | 10–300 MHz |
| X/Y-axis Repeatability | ±0.5 µm |
| Ambient Temperature Range | 19–25 °C |
| Relative Humidity Limit | ≤65% RH |
| Imaging Modes Supported | A-scan, B-scan, C-scan, D-scan, X-scan |
| System Positioning Accuracy | ±0.03 mm |
| Effective Imaging Resolution | 0.2 × 0.2 mm |
| Minimum Detectable Defect Size | <25 µm (at 100 MHz) |
| Operating Frequency Range (Typical) | ≥20 MHz |
| Brand | -- |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | EM61Lite |
| Detection Mode | Full Automatic Operation |
| Application | Subsurface Metallic Object Detection (Ferrous & Non-Ferrous) |
| Platform Integration | UAV-Mountable with Terrain-Tracking Capability |
| Compliance | Designed for UXO Clearance, Utility Locating, and Archaeological Survey Applications |
| Data Output | Georeferenced TEM Measurements |
| Brand | MAIERIC |
|---|---|
| Origin | Anhui, China |
| Model | DEMT-8/16 |
| Detector Type | Custom Electromagnetic Sensor Array |
| Spatial Resolution | 5% of cross-sectional diameter |
| Density Resolution | Configurable (system-dependent) |
| Penetration Capability | Customizable per application |
| Measurement Range | Configurable (up to Ø300 mm cross-section) |
| Dimensional Accuracy | ±5% of cross-sectional dimension |
| Density Measurement Accuracy | Configurable |
| Operating Temperature | Up to 300 °C (non-contact probe interface) |
| Imaging Modes | Dual-mode (Eddy Current Tomography & Metal Flaw Detection) |
| Signal-to-Noise Ratio (SNR) | 60–90 dB |
| Frequency Range | 1 kHz–200 kHz (standard) |
| Channel Configuration | 8 or 16 independently configurable channels |
| Sampling Rate | Up to 100 kS/s per channel (flaw detection mode) |
| Reconstruction Grid | Up to 32×32 pixels (1% cross-sectional area resolution) |
| Front-End Signal Processing | Programmable 3-stage gain amplifier (1×–8×), with optional expansion |
| Data Output | Complex impedance components (real, imaginary, magnitude, phase), full complex-plane representation |
| Core Platform | FPGA-based digital acquisition and real-time processing architecture |
| Brand | EVIDENT |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | NORTEC 600 |
| Pricing | Upon Request |
| Display | 5.7-inch VGA, 640×480 resolution |
| Operating Temperature | –10 °C to 50 °C |
| IP Rating | IP66 |
| Battery Life | Up to 10 hours |
| Frequency Range | 10 Hz to 12 MHz |
| Measurement Rate | 6 kHz |
| Real-time Readouts | Up to 2 simultaneous |
| Signal Processing | Automatic internal balancing (BNC), true automatic mixing, enhanced rotating scanner filters |
| Data Storage | 500 files (programs + acquired data) |
| Weight | 1.6 kg |
| Compliance | EN 15548 |
| Brand | EVIDENT |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | OmniScan X4 128:128PR |
| Pricing | Upon Request |
| Brand | SHNTI (Shanghai Naten Instruments) |
|---|---|
| Origin | Shanghai, China |
| Model | FalconWave®-S Series |
| Detection Frequency Range | 60–800 GHz |
| Spatial Resolution | 1 mm per pixel |
| Scan Speed | ~7 minutes per image (at 1 mm resolution) |
| Measurement Accuracy | <3% deviation (offline precise scanning) |
| Repeatability Error | <1% |
| Interface | Gigabit Ethernet (Plug-and-Play) |
| Power Consumption | Low (CMOS-based THz sensor architecture) |
| Compliance | CE-marked for laboratory use |
| Target Users | R&D laboratories, academic research groups, materials science institutes, QC/QA departments in advanced manufacturing |
| Brand | Force |
|---|---|
| Origin | Denmark |
| Model | ERE 20 |
| Type | Embedded Half-Cell Reference Electrode |
| Electrode Material | Manganese Dioxide (MnO₂) |
| Electrolyte pH | ~13.5 |
| Housing | Stainless Steel (AISI 316) |
| Ionic Membrane | Cementitious Mortar |
| Input Impedance Requirement | >100 MΩ |
| Compliance | EN 12696:2016, ASTM C876, ISO 15663-2 |
| Installation | Embeddable in Fresh or Existing Concrete |
| Output Interface | Standard BNC or Screw-Terminal Voltage Output |
| Operating Temperature Range | −10 °C to +60 °C |
| Long-Term Drift | < ±2 mV/year (typical, under stable alkaline conditions) |
| Origin | Guangdong, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | C40 |
| Price | USD 3,100 (FOB Guangdong) |
| Display | 3.5-inch sunlight-readable LCD |
| Imaging Sensor | 1/4" CMOS, 720p HD (1280×720 @ 30 fps) |
| Insertion Tube Diameter Options | 2.0 mm, 3.2 mm, 4.0 mm, 6.0 mm |
| Insertion Tube Length Options | 1 m, 2 m, 3 m, 5 m |
| Waterproof Rating | IP67 (30 min submersion in 1 m water) |
| Oil & Chemical Resistance | Fluoropolymer-coated sheath (resistant to hydrocarbons, mild acids, alkalis) |
| Zoom | Real-time 4× digital zoom |
| Image Management | Thumbnail grid preview, full-screen playback, filename editing, timestamp watermarking, annotation tagging, selective deletion |
| Articulation | Dual-way mechanical bending (≥120° up/down) |
| Storage | Internal 32 GB eMMC + microSDXC slot (up to 512 GB) |
| Compliance | CE, RoHS, ISO 17025 traceable calibration documentation available |
| Brand | Olympus |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | GE Series |
| Pricing | Available Upon Request |
| Application Field | General Industrial NDT |
| Brand | Gentec-EO |
|---|---|
| Origin | Canada |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | THZ9D-20mS-BL-D0 |
| THz Source Type | Pulsed |
| Spectral Range | 0.1–30 THz |
| Brand | GNR |
|---|---|
| Origin | Italy |
| Model | MagStress5c |
| Measurement Principle | Magnetic Barkhausen Noise (MBN) Analysis |
| Portability | Integrated battery-powered handheld unit with touch display and USB interface |
| Compliance | Designed for field-deployable NDT per ISO 10893-13 and ASTM E3027 guidelines |
| Sample Type | Ferromagnetic metallic components (e.g., bearing races, gear teeth, camshafts, turbine blades) |
| Output | Real-time MBN amplitude & frequency spectrum, quantitative burn index, pass/fail classification |
| Brand | GREATEK |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | GT-E220 |
| Price | USD 32,500 (FOB Guangdong) |
| Imaging Method | Optical Rigid Endoscope |
| Camera Resolution | 640 × 480 (0.31 MP effective, 720p-equivalent progressive scan output) |
| Display | 6.5-inch capacitive touchscreen (1280 × 720 IPS LCD) |
| Measurement Modes | Point-to-Point, Point-to-Line, Point-to-Plane, Curvilinear Distance |
| Real-time 3D Reconstruction | Binocular stereo photogrammetry with sub-pixel disparity matching |
| Battery | Removable 7800 mAh Li-ion pack (typ. 4.5 h continuous operation) |
| Data Export | USB 2.0 mass storage mode, FAT32-formatted U disk support |
| Compliance | T/CECS 683–2020, JGJ/T 485–2019, DB37/T 5106–2018, DG/TJ 08–2252–2018, DB13(J)/T 8327–2019, DB32/T 3754–2020, DBJ/T–199–2020, DB22/T 5037–2020, DBJ52/T105–2021 |
| Brand | Haytham |
|---|---|
| Model | Blue Box1200-32 |
| Origin | Guangdong, China |
| Type | Domestic |
| Supplier Type | Authorized Distributor |
| Pricing | Upon Request |
| Brand | Haytham |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | BlueBox 2000-1Q |
| Pricing | Upon Request |
| Brand | HG |
|---|---|
| Origin | Japan |
| Model | MIV-X |
| Detection Principle | Ultrasonic Excitation + Stroboscopic Laser Imaging |
| Surface Displacement Resolution | Sub-micron (optical) |
| Effective Inspection Depth | Up to ~1 mm |
| Sample Interface Compatibility | Bonded interfaces, thermal spray coatings, paint layers, composite laminates |
| Optional Accessory | Motorized Optical Zoom Lens Assembly |
| Regulatory Context | Designed for R&D and QC environments compliant with ISO 16840 (Ultrasonic Testing — Characterization of ultrasonic testing equipment), ASTM E2700 (Standard Guide for Acoustic Emission Examination of Fiber Reinforced Polymer Matrix Composites), and GLP-aligned data traceability |
| Brand | Analysis |
|---|---|
| Country of Origin | Germany |
| Model | KSI V-700E |
| Instrument Type | Digital |
| Inspection Method | Pulse-Echo |
| Waveform | Pulsed Ultrasound |
| Maximum Scan Area | 700 mm × 1000 mm |
| Gain Range | 0–120 dB |
| Dynamic Range | ≥40 dB |
| Resolution | ≥32 dB |
| Transducer Configuration | Single-Crystal |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported Instrument |
| Model | V-400E |
| Detection Method | Pulse-Echo Mode |
| Waveform Type | Pulsed Ultrasound |
| Maximum Scan Speed | 2000 mm/s |
| Minimum Scan Area | 200 µm × 200 µm |
| RF Bandwidth | 500 MHz |
| Probe Configuration | Single Transducer (Standard) |
| Frequency Range (Optional Probes) | 100–2000 MHz |
| Axial Resolution (Typical) | <100 nm (with Nano-series transducers) |
| Integrated Optical Microscopy | Yes (Inverted & Epi-Illumination Configurable) |
| Compliance | ASTM E1783, ISO 16932, IPC-J-STD-035, JEDEC JESD22-A108 |
| Brand | LaVision GmbH |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | StrainMaser Components |
| Pricing | Available Upon Request |
| Brand | LAwave |
|---|---|
| Origin | Germany |
| Model | LAwave |
| Type | Laser-based Surface Acoustic Wave (SAW) Dispersion Analyzer |
| Application | Thin-film elastic property characterization |
| Compliance | Designed for ISO/IEC 17025-aligned laboratories, compatible with GLP/GMP data integrity workflows |
| Brand | MAIERIC |
|---|---|
| Origin | Anhui, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | Array Eddy Current Testing Instrument |
| Inspection Method | Automated Scanning |
| Eddy Current Signal Type | Multi-Frequency Eddy Current |
| Design Form Factor | Portable |
| Number of Channels | Customizable |
| Brand | MAIERIC |
|---|---|
| Origin | Anhui, China |
| Model | PECT-1 PULSED EDDY CURRENT |
| Design | Portable |
| Inspection Method | Pulsed Eddy Current (PEC) |
| Signal Type | Transient Electromagnetic Response |
| Measurement Integration | Encoder-based Position Tracking |
| Lift-off Tolerance | Up to 160 mm |
| Wall Thickness Range | 1–30 mm |
| Non-ferromagnetic Cladding Penetration | Up to 2 mm |
| Cladding Thickness Variation Compensation | ±50% with ≤±2% measurement deviation |
| Imaging Mode | User-configurable 2D grid mapping with real-time coordinate registration |
| Compliance | Designed for ASTM E2884-23 (Standard Guide for Pulsed Eddy Current Examination), ISO 12718:2019 (Non-destructive testing — Vocabulary — Eddy current testing), and GLP-aligned data integrity workflows |
| Brand | METTLER TOLEDO |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Regional Classification | Domestic (China) |
| Model | ASN9000 |
| Pricing | Available Upon Request |
| Brand | METTLER TOLEDO |
|---|---|
| Origin | Switzerland |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | AXR |
| Pricing | Upon Request |
| Brand | METTLER TOLEDO |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | AXR |
| Pricing | Available Upon Request |
| Brand | METTLER TOLEDO |
|---|---|
| Origin | United Kingdom |
| Model | DHS/L Series |
| Detection Principle | High-Frequency Electromagnetic Induction |
| IP Rating | IP69K (HDS), IP65 (L Series) |
| Construction | 316L Stainless Steel Wetted Parts |
| Compatible Media | Liquids, Slurries, Pastes, Emulsions |
| Integration Interface | 4–20 mA, Ethernet/IP, PROFIBUS, Modbus TCP |
| Software Platform | METTLER TOLEDO Profile/Signature Suite |
| Compliance | FDA 21 CFR Part 11 (audit trail, electronic signature), HACCP, ISO 22000, IFS Food, BRCGS, EC 852/2004 |