Nitrogen Hydrogen Air Integrated Generator
Filter
Showing all 6 results
| Brand | Anyan Instruments |
|---|---|
| Origin | Zhejiang, China |
| Model | AYAN-T500 |
| Nitrogen Purity | ≥99.999% |
| Hydrogen Purity | ≥99.999% |
| Air Quality | Dew Point ≤−40 °C, Oil-Free, Particulate <0.01 µm |
| Nitrogen Flow Rate | 0–500 mL/min |
| Hydrogen Flow Rate | 0–500 mL/min |
| Air Flow Rate | 0–5000 mL/min |
| Output Pressure | 0–0.6 MPa (adjustable per gas stream) |
| Control System | Microprocessor-Based Digital Interface |
| Power Supply | 220 V ±10%, 50 Hz ±5% |
| Power Consumption | 450 W |
| Dimensions | 450 × 440 × 400 mm |
| Weight | 35 kg |
| Operating Environment | 10–40 °C, RH ≤85% non-condensing |
| Brand | Hangzhou Chuanyi Electronic |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | OEM Manufacturer |
| Product Category | Domestic |
| Model | AYAN-T500 |
| Purity | 99.999% (N₂ & H₂) |
| Flow Rate | N₂: 0–500 mL/min |
| H₂ | 0–500 mL/min |
| Air | 0–5000 mL/min |
| Output Pressure | 0–0.5 MPa |
| Design | Integrated Monoblock Architecture |
| Brand | HLT |
|---|---|
| Origin | Shanghai, China |
| Model | HLT-300II, HLT-500II |
| Gas Purity | N₂ > 99.997%, H₂ > 99.999%, Air: oil-free, dried, triple-purified |
| Output Flow | N₂/H₂: 0–300 mL/min (HLT-300II) / 0–500 mL/min (HLT-500II) |
| Air | 0–2000 mL/min (HLT-300II) / 0–5000 mL/min (HLT-500II) |
| Output Pressure | H₂/N₂/Air: 0–0.5 MPa (factory-set at 0.4 MPa) |
| Power Supply | 220 V ±10%, 50 Hz ±5% |
| Max. Power | 450 W |
| Dimensions (W×D×H) | 460 × 310 × 670 mm |
| Weight | 39 kg |
| Operating Environment | 10–40 °C, RH ≤85%, non-corrosive, low-dust ambient |
| Brand | Quanpu |
|---|---|
| Origin | Shanghai, China |
| Model | QPT-300ZD |
| Gas Purity | H₂ ≥ 99.999%, N₂ > 99.999% |
| Output Flow | H₂: 0–300 mL/min, Air: 0–2000 mL/min |
| Output Pressure | N₂: 0–0.5 MPa (factory-set at 0.4 MPa), H₂: 0–0.4 MPa (factory-set at 0.3 MPa), Air: 0–0.45 MPa (factory-set at 0.4 MPa) |
| Design | Integrated monoblock chassis |
| Control Mode | On/Off switch control |
| Power Supply | 220 V ±10%, 50 Hz ±5% |
| Max Power Consumption | 500 W |
| Operating Environment | 0–40 °C, RH ≤85%, non-corrosive, low-dust ambient |
| Dimensions (L×W×H) | 560 × 430 × 360 mm (excl. 30 mm mounting flange) |
| Brand | Ruinen |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | OEM Manufacturer |
| Model | RNT-300 |
| Nitrogen Purity | ≥99.999% |
| Hydrogen Purity | ≥99.999% |
| Nitrogen Flow Rate | 0–300 mL/min |
| Hydrogen Flow Rate | 0–300 mL/min |
| Air Flow Rate | 0–3000 mL/min |
| Output Pressure | 0–0.4 MPa |
| Pressure Stability | <±0.2% FS |
| Nitrogen & Hydrogen Reservoir Volume | 3 L each |
| Feed Water Resistivity Requirement | ≥1 MΩ·cm |
| Air Compressor Noise Level | <35 dB(A) |
| Power Supply | 220 V ±10%, 50–60 Hz |
| Operating Temperature | 0–40 °C |
| Operating Humidity | <85% RH |
| Design | Integrated (All-in-One) Unit |
| Brand | XIUILAB |
|---|---|
| Origin | Shanghai, China |
| Model | XGT-300 / XGT-500 |
| Output Pressure | 0.4 MPa |
| Nitrogen Purity | 99.99% (O₂ < 100 ppm) |
| Hydrogen Purity | 100.00% (O₂-free, oil-free) |
| Air Purity | Oil-free, Class 3 compressed air per ISO 8573-1 |
| N₂ Flow Range | 0–300 mL/min (XGT-300) / 0–500 mL/min (XGT-500) |
| H₂ Flow Range | 0–300 mL/min (XGT-300) / 0–500 mL/min (XGT-500) |
| Air Flow Range | 0–2 L/min (XGT-300) / 0–5 L/min (XGT-500) |
| Power Supply | 220 V ±10%, 50 Hz |
| Max. Power Consumption | 350 W (XGT-300) / 450 W (XGT-500) |
| Operating Temperature | 0–45 °C |
| Relative Humidity | <85% RH (non-condensing) |
| Dimensions (L×W×H) | 500 × 400 × 450 mm |
| Weight | 40 kg (XGT-300) / 42 kg (XGT-500) |
| Pressure Stability | ≤ ±0.01 MPa |