Optical Imaging Equipment
Filter
Showing 31–60 of 168 results
| Brand | Andor |
|---|---|
| Origin | United Kingdom |
| Model | iKon-XL SO |
| Sensor Format | 4096 × 4112 pixels |
| Pixel Size | 15 µm × 15 µm |
| Active Area | 61.7 mm × 61.7 mm |
| Readout Speed | 16 MHz (4 MHz × 4 channels) |
| Operating Temperature | −70 °C (thermoelectric cooling) |
| Sensor Type | Back-illuminated (BI) and Back-illuminated Deep-Depletion (BR-DD) CCD |
| Spectral Response | Near-IR to 20 keV (direct detection) |
| Full Well Capacity | 350,000 e⁻ |
| Interface | USB 3.0 and fiber-optic link |
| Compliance | CE, RoHS, ISO 9001-certified manufacturing |
| Brand | Andor |
|---|---|
| Origin | United Kingdom |
| Model Series | DH720, DH740, DH712, DH734 |
| Sensor Format Options | 512×512, 1024×1024, 1024×256, 2048×512 |
| Effective Pixel Count | Up to 2048 × 512 |
| Active Imaging Area | Up to 25 mm × 6.9 mm |
| Minimum Operating Temperature | −40 °C |
| Gating Resolution | 25 ps |
| Minimum Gate Width | 40 ns |
| Intensifier Diameter | 18 mm or 25 mm |
| Intelligate™ Synchronization | Yes |
| Built-in Digital Delay Generator | Yes |
| Remote Control Interface | Ethernet & USB 3.0 |
| Brand | Oxford Instruments |
|---|---|
| Origin | United Kingdom |
| Model | iStar |
| Sensor Resolution | 1024 × 1024 pixels |
| Pixel Size | 13 µm |
| Active Sensor Area | 13.3 mm × 13.3 mm |
| Onboard Memory | 2 GB |
| Readout Speed | 5 MHz |
| Quantum Efficiency | >50% |
| Gating Width | <2 ns |
| Minimum Inter-Frame Interval (PIV mode) | 300 ns |
| Frame Rate (full frame) | up to 4,000 fps |
| Interface | USB 3.0 |
| Brand | Andor |
|---|---|
| Origin | United Kingdom |
| Model | iStar |
| Image Resolution | 2560 × 2160 |
| Pixel Size | 6.5 µm (sCMOS variant) |
| Sensor Format | 2560 × 2160 |
| Quantum Efficiency | up to 50% |
| Gating Accuracy | <2 ns |
| Minimum Gate Width | <2 ns |
| Timing Jitter | <10 ps |
| Read Noise | as low as 2.6 e⁻ |
| Dark Current | as low as 0.1 e⁻/pix/s |
| Maximum Frame Rate | 50 fps (sCMOS), up to 4,000 sps (gated operation) |
| Dynamic Range | >15-bit equivalent (full well: 30,000–500,000 e⁻ depending on sensor variant) |
| Coupling | Fiber-optic taper (not prism-based) |
| Photocathode Types | Gen II (alkali-based) and Gen III (GaAs) |
| Spectral Response | 129 nm (VUV) to 1100 nm (SWIR) |
| Brand | Andor |
|---|---|
| Origin | United Kingdom |
| Model | iStar sCMOS (ICMOS) |
| Sensor Type | Fiber-Optically Coupled sCMOS |
| Resolution | 2560 × 2160 pixels |
| Max Frame Rate | 50 fps @ full resolution |
| Ultra-High Speed Mode | 4008 fps @ 2560 × 8 ROI |
| Read Noise | 2.7 e⁻ rms @ 560 MHz |
| Quantum Efficiency | Enhanced across UV-VIS-NIR |
| Linearity | >99.8% |
| Dynamic Range | Industry-Leading (≥85 dB typical) |
| Minimum Inter-Frame Interval (PIV mode) | 300 ns |
| Interface | USB 3.0 |
| Compliance | CE, RoHS, ISO 9001-certified manufacturing |
| Brand | Andor |
|---|---|
| Origin | Belgium |
| Model | iXon Life 888 |
| Sensor Type | Back-Illuminated EMCCD |
| Resolution | 1024 × 1024 |
| Pixel Size | 13 µm |
| Full-Frame Frame Rate | 26 fps |
| Cooling Temperature | -80 °C |
| Shutter Type | Global Shutter |
| Interface | USB 3.0 |
| QE Peak | >95% |
| Read Noise | Sub-electron (EM-gain enabled) |
| Dark Current | <0.001 e⁻/pix/s at -80 °C |
| EM Gain Range | Up to 3000× |
| Brand | Andor |
|---|---|
| Origin | United Kingdom |
| Model | iXon |
| Pixel Size | 13 µm |
| Cooling Temperature | −100 °C (iXon Ultra), −80 °C (iXon Life) |
| Readout Noise | < 1 e⁻ with EM Gain |
| Quantum Efficiency | >95% (back-illuminated) |
| Frame Rate | up to 670 fps (cropped) |
| Chip Format | 1024 × 1024 (iXon 888), 512 × 512 (iXon 897) |
| Interface | USB 3.0 (Ultra), USB 2.0 (Life) |
| EMCCD Readout Speed | 30 MHz (888), 17 MHz (897) |
| Full Well Capacity | 80,000 e⁻ (888), 180,000 e⁻ (897) |
| QE Options | BV, EX2, UVB (Ultra) |
| Vacuum Warranty | 7-year UltraVac™ |
| Brand | Andor |
|---|---|
| Origin | United Kingdom |
| Model | iXon Ultra 888 |
| Sensor Format | 1024 × 1024 pixels |
| Pixel Size | 13 µm |
| Quantum Efficiency | >95% (peak, back-illuminated) |
| Technology | Electron-Multiplying CCD (EMCCD) |
| Primary Application | Single-molecule fluorescence microscopy, live-cell super-resolution imaging |
| Brand | Andor |
|---|---|
| Origin | United Kingdom |
| Model | iXon+ DU860 / iXon+ DU885 |
| Sensor Type | Frame Transfer EMCCD |
| Cooling | Thermoelectric (TE) to –100 °C (DU860) / –95 °C (DU885) |
| Quantum Efficiency | >90% (back-illuminated, DU860) / >65% (Virtual Phase, DU885) |
| Readout Speed | Up to 10 MHz (DU860) / Up to 35 MHz (DU885) |
| Frame Rate | 515 full frames/s (DU860, 128 × 128) |
| Sensor Format | 128 × 128 (DU860), 1004 × 1002 (DU885) |
| Brand | Andor |
|---|---|
| Origin | United Kingdom |
| Model | iXon+ DU888 |
| Sensor Format | 1024 × 1024 Frame Transfer EMCCD |
| Active Area | 13.3 × 13.3 mm |
| Pixel Size | 13.3 µm |
| Readout Speed | 30 MHz |
| Full-Frame Frame Rate | 26 fps @ 1024 × 1024 |
| Binned Frame Rate | 93 fps @ 512 × 512 |
| Quantum Efficiency | Enhanced via EX2 coating (peak >95% in visible, extended NIR response) |
| Cooling | -95 °C thermoelectric with UltraVac™ vacuum seal |
| Dark Current | <0.0001 e⁻/pix/s at -95 °C |
| EM Gain Range | 1–3000× (linear, calibrated) |
| RealGain™ Technology | Real-time, hardware-based linear gain calibration |
| EMCAL™ | On-chip EM gain auto-calibration for long-term stability |
| CIC Suppression | Optimized pixel clocking + False Noise Filter (FNF) algorithm |
| Output Interface | USB 3.0 |
| Data Output Modes | Counts, electrons, photons (quantitative photon counting) |
| Etaloning Suppression | Edge-optimized coating & optical design for reduced NIR fringing |
| Baseline Stability | <0.5 ADU RMS over 1 hr |
| Vacuum Warranty | 7 years (UltraVac™) |
| Brand | Andor |
|---|---|
| Origin | United Kingdom |
| Model | iXon+ DU897 |
| Sensor Type | Back-illuminated Frame Transfer CCD (512 × 512 pixels) |
| Cooling | Thermoelectric to –100 °C |
| Quantum Efficiency | >90% at peak wavelength |
| Readout Speed | Up to 10 MHz |
| Output Modes | EM Amplifier and Conventional CCD Amplifier |
| Vacuum Enclosure | UltraVac™ |
| Gain Control | RealGain™ (linear, quantitative EM gain calibration) |
| CIC Suppression | Minimal Clock-Induced Charge |
| Dynamic Range | High dynamic range readout |
| Baseline Stability | Enhanced Baseline Clamp |
| Calibration | EMCAL™ EM gain self-calibration |
| Operating Mode | Cropped Sensor Mode for sub-millisecond temporal resolution |
| Mounting Interface | C-mount compatible (shutter optional) |
| Brand | Oxford Instruments |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Marana 4.2B-11 |
| Image Resolution | 4.2 MP (2048 × 2048) |
| Pixel Size | 11 µm |
| Sensor Format | 22.5 mm × 22.5 mm (32 mm diagonal) |
| Readout Speed | 100 MHz (16-bit mode) |
| Dynamic Range | 53,000:1 |
| Quantum Efficiency | 95% @ peak (600 nm) |
| Cooling | -45 °C (thermo-electric vacuum-sealed) |
| Brand | Oxford Instruments |
|---|---|
| Origin | United Kingdom |
| Model | Newton |
| Sensor Pixel Size | 13.5 × 13.5 µm or 26 × 26 µm |
| Cooling | Thermoelectric (TE) to –100°C |
| Readout Speed | Multi-Megahertz (up to 3 MHz) |
| Quantum Efficiency | Up to 95% |
| Vacuum Technology | UltraVac™ |
| Sensor Architecture | EMCCD or conventional CCD |
| Spectral Acquisition Rate | >1600 spectra/sec (Newton 920) |
| Pixel Array Options | 1024 × 255, 2048 × 512, or 1600 × 400 |
| Brand | Andor |
|---|---|
| Origin | United Kingdom |
| Model | Newton Series |
| Sensor Formats | 2048 × 512 & 1024 × 256 |
| Cooling Temperature | Down to –100 °C (thermoelectric) |
| Vacuum Encapsulation | UltraVac™ |
| Interface | USB 2.0 |
| Compliance | CE, RoHS, ISO 9001-certified manufacturing |
| Software Support | Andor SOLIS®, SDK for LabVIEW, MATLAB, Python |
| Typical Read Noise | <3 e⁻ RMS (at 1 MHz) |
| Dark Current | <0.001 e⁻/pix/s at –100 °C |
| Brand | Andor |
|---|---|
| Model | Newton SO |
| Detector Type | Back-Illuminated, Deep-Depletion CCD |
| Vacuum Interface | 6-inch CF152 Conflat Flange (Rotatable Knife-Edge) |
| Quantum Efficiency | Up to 95% (at selected X-ray/EUV/VUV wavelengths) |
| Read Noise | <3 e⁻ RMS (typical, at slowest readout speed) |
| Cooling | Thermoelectric (TE) to –100°C (ambient-dependent) |
| Pixel Size | 13.5 µm |
| Readout Modes | Full Frame, Sub-Frame (Crop Mode), Multiple Region of Interest (ROI) |
| Maximum Frame Rate | >1,000 fps (in optimized Crop Mode) |
| Data Interface | USB 2.0 |
| Onboard Features | Integrated Filter Wheel Slot (mechanical, motorized optional), Shutter Control, Trigger I/O (TTL-compatible) |
| Compliance | CE, RoHS, UL/CSA recognized power supply |
| Brand | Andor |
|---|---|
| Origin | United Kingdom |
| Model | NewtonEM |
| Sensor Architecture | Electron-Multiplying CCD (EMCCD) |
| Pixel Format | 1600 × 200 or 1600 × 400 |
| Pixel Size | 16 µm × 16 µm |
| Cooling | Thermoelectric (TE), down to –100 °C |
| Vacuum Encapsulation | UltraVac™ |
| Interface | USB 2.0 |
| Quantum Efficiency Options | Multiple back-illuminated sensor variants available |
| Single-Photon Sensitivity | Yes |
| Primary Application Domain | Low-Light Spectroscopy, Time-Resolved Fluorescence, Raman, UV-Vis-NIR Spectral Imaging |
| Brand | Andor |
|---|---|
| Origin | United Kingdom |
| Model | sCMOS |
| Pixel Count | 2560 × 2160 (5.5 MP) |
| Pixel Size | 6.5 µm × 6.5 µm |
| Sensor Area | 16.64 mm × 14.0 mm |
| Cooling Temperature | −40 °C |
| Readout Speeds | 560 MHz / 166 MHz / 110 MHz / 22 MHz |
| Max Frame Rate | 100 fps @ full resolution |
| Dynamic Range | >14 bit @ 30 fps |
| Readout Modes | Multi-ROI |
| Interface | Camera Link & USB 2.0 |
| Software | Andor SDK & Solis |
| Brand | Andor |
|---|---|
| Origin | UK (Manufactured in Belfast) |
| Sensor Type | Back-Illuminated sCMOS |
| Resolution | 2048 × 2048 (4.2 MP), 1400 × 1400 (2.0 MP) |
| Pixel Size | 6.5 µm (Sona 4.2B-6), 11 µm (Sona 4.2B-11 & Sona 2.0B-11) |
| Quantum Efficiency | Up to 95% @ 600 nm |
| Cooling | Thermoelectric to –45 °C |
| Read Noise | ≤1.6 e⁻ (median, 12-bit), ≤1.2 e⁻ (CMS mode) |
| Full-Frame Frame Rate | 43 fps (USB 3.0, 16-bit), 74 fps (CoaXPress, 16-bit) |
| Dynamic Range | Up to 53,000:1 |
| Interface | USB 3.0 and CoaXPress (optional) |
| Shutter Mode | Rolling Shutter |
| Pixel Well Depth | 55,000–85,000 e⁻ |
| Linearity | >99.7% |
| PRNU | <0.5% |
| Compliance | CE, RoHS, FDA 21 CFR Part 11 ready (via Andor Solis Software) |
| Brand | Andor |
|---|---|
| Origin | United Kingdom |
| Model Series | Sona, Neo, Zyla |
| Sensor Resolution | 2048 × 2048 |
| Pixel Size | 11 µm |
| Readout Speed | 48 fps (full frame, Sona 4.2B-11) |
| Peak Quantum Efficiency | 95% |
| Cooling | Vacuum-cooled to −45 °C (Sona/Marana), −40 °C (Neo), −5 °C (Zyla) |
| Brand | Andor |
|---|---|
| Origin | United Kingdom |
| Model | SR750 |
| Spectral Resolution | Up to 0.02 nm |
| Optical Design | Czerny-Turner |
| Grating Options | Triple-grating turret (user-recorded per unit) |
| Detector Interfaces | Dual-output ports (CCD/ICCD, InGaAs, MCT, etc.) |
| Wavelength Range | Up to 12 µm (with appropriate detector & silver-coated optics) |
| Stray Light Rejection | Optimized multi-path optical layout with low crosstalk |
| Optional Coating | Enhanced silver coating for improved IR reflectivity |
| Accessories | Fiber optic coupling, flange mounts, motorized slits, shutters, adjustable leveling feet |
| Compliance | Designed for integration into GLP/GMP and ISO/IEC 17025-compliant spectroscopic workflows |
| Brand | Andor |
|---|---|
| Origin | United Kingdom |
| Model | Zyla 4.2 PLUS |
| Sensor Type | Back-illuminated sCMOS |
| Quantum Efficiency (QE) | Up to 82% @ 560 nm |
| Read Noise | < 0.9 e⁻ (rms) |
| Dynamic Range | 33,000:1 |
| Pixel Size | 6.5 µm |
| Resolution | 2048 × 2048 (4.2 MP) or 2560 × 2160 (5.5 MP) options |
| Full-Frame Frame Rate | 53 fps via USB 3.0 (optimized mode), up to 100 fps in cropped modes |
| Shutter Modes | Global and Rolling |
| Cooling | Thermoelectric (TE) to 0 °C @ 35 °C ambient |
| Specialized Acquisition Modes | Laser Sheet Microscopy, Line-Scan Confocal, Fluorescence Correlation Spectroscopy (FCS) with ROI-based rates up to 26,041 fps |
| Compliance | CE, RoHS, FDA 21 CFR Part 11-ready software support |
| Brand | Oxford Instruments |
|---|---|
| Origin | United Kingdom |
| Model | Zyla 4.2 PLUS sCMOS |
| Image Resolution | 2048 × 2048 |
| Pixel Size | 6.5 µm |
| Sensor Area | 13 mm × 13 mm |
| Onboard Memory | 4 GB |
| Readout Speed | 540 MHz |
| Dynamic Range | 33,000:1 |
| Quantum Efficiency (QE) | 82% |
| Interface | USB 3.0 |
| Full-Frame Frame Rate | 53 fps |
| FCS ROI Frame Rate (2048 × 8) | 26,041 fps |
| Read Noise | < 1 e⁻ |
| Linearity | 99.8% |
| Brand | Andor |
|---|---|
| Origin | United Kingdom |
| Model | Zyla 5.5 |
| Sensor Resolution | 2560 × 2160 |
| Pixel Size | 6.5 µm × 6.5 µm |
| Active Sensor Area | 16.6 mm × 14.0 mm |
| Readout Speeds | 560 MHz (280 MHz × 2) / 200 MHz (100 MHz × 2) |
| Dynamic Range | 25,000:1 |
| Read Noise | ≤0.9 e⁻ (rolling shutter, 216 MHz mode) |
| Cooling | 0 °C (air-cooled), –10 °C (water-cooled) |
| Full-Well Capacity | 30,000 e⁻ |
| Peak Quantum Efficiency | 57% |
| Shutter Modes | Global and Rolling |
| Max Frame Rate | 100 fps at full resolution (10-tap mode) |
| Brand | Artec |
|---|---|
| Origin | Imported (Non-Chinese) |
| Manufacturer Type | Authorized Distributor |
| Model | Eva |
| Technology | Structured Light 3D Scanning |
| Weight | ~0.85 kg |
| Scan Speed | Up to 16 fps |
| Resolution | Up to 0.5 mm |
| Accuracy | Up to 0.1 mm |
| Texture Capture | Full-color RGB (2.3 MP) |
| Field of View | 244 × 169 mm (at 400 mm distance) |
| Working Distance | 0.4–1.0 m |
| Power Supply | Internal battery (6+ hrs) or USB-C powered |
| Output Formats | STL, OBJ, PLY, AOP, ASC, PDF, VRML, X3D, 3MF |
| Software Included | Artec Studio (v19+) |
| Compliance | CE, FCC, RoHS |
| Brand | Artec |
|---|---|
| Model | EVA LITE |
| Type | Structured Light 3D Scanner |
| Tracking | Geometry-Only (No Texture/Color Capture) |
| Resolution | Up to 0.2 mm |
| Data Output Format | STL, OBJ, ASC, PLY, AOP, WRML, X3D, PDF3D |
| Power Consumption | Low (USB-Powered) |
| Compatibility | Windows 10/11 (64-bit), Intel Core i7 or AMD Ryzen 7 recommended |
| Software | Artec Studio 14 (AI-powered processing, HD Mode, Smart Fusion, Radar-guided scanning) |
| Compliance | CE, FCC, RoHS |
| Brand | Artec |
|---|---|
| Model | ARTEC LEO |
| Type | Handheld Structured Light 3D Scanner |
| Onboard Processing | Real-time GPU-accelerated 3D reconstruction |
| Display | 5.5" HD touchscreen (1920 × 1080) |
| Capture Speed | Up to 80 fps |
| Resolution | Up to 0.2 mm point accuracy |
| Texture Capture | Full-color RGB imaging (sRGB, 24-bit) |
| Working Distance | 0.35–1.2 m |
| Field of View | 38.0° × 23.0° (H × V) |
| Connectivity | Wi-Fi 5 (802.11ac), Bluetooth 4.2, USB-C (for charging/data sync) |
| Power | Internal rechargeable Li-ion battery (up to 4 hours continuous operation) |
| Software Compatibility | Artec Studio 19+ (Windows 10/11 64-bit) |
| Export Formats | OBJ, STL, PLY, AOP, ASC, PDF (3D), STEP (via CAD plugins), IGES, X3D |
| Compliance | CE, FCC, RoHS |
| Brand | Artec |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Pricing | Available Upon Request |
| Brand | Artinis |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | LC-3 |
| Effective Pixels | 1 MP (1024 × 1024) |
| Pixel Array | 2048 × 2048 |
| Pixel Size | 13.5 µm × 13.5 µm |
| Frame Rate | ≥1 fps (full-frame, real-time Laue pattern acquisition) |
| Detector Type | Scientific-grade CCD with phosphor-coated imaging plate coupling |
| Dynamic Range | >16-bit (65,536 intensity levels) |
| Cooling | Thermoelectric (−20 °C stabilized) |
| Brand | Artium |
|---|---|
| Origin | USA |
| Model | DIS |
| Application | Droplet & Particle Size, Morphology, Velocity, and Concentration Measurement |
| Technology | Particle Tracking Velocimetry (PTV) |
| Field of View | 140 mm × 70 mm (2:1 aspect ratio) |
| Illumination | Uniform, Homogeneous LED Backlighting |
| Ruggedization | Shock- and Vibration-Resistant Design |
| Compliance Context | Designed for ASTM D6328, ISO 9276-2, and USP <788> particle imaging alignment principles |
| Software Support | Proprietary DIS-Analyzer Suite with timestamped frame capture, binary segmentation, and centroid-based trajectory reconstruction |
| Brand | Artray |
|---|---|
| Origin | Japan |
| Model | ARTCAM TNIR Series |
| Spectral Range | 900–1700 nm |
| Resolution Options | 640×512, 320×256, 128×128 pixels |
| Pixel Pitch | 20 µm (standard), up to 30 µm |
| Frame Rate | up to 258 fps |
| Interface | USB 3.0 / USB 2.0 |
| Analog Video Output | Optional |
| A/D Resolution | 12–14 bit |
| Shutter Type | Global |
| Target Applications | SWIR imaging, industrial inspection, laser beam profiling, semiconductor metrology, R&D |