Optical Instruments
Filter
Showing 61–90 of 1831 results
| Brand | 3nh |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Manufacturer |
| Product Type | Spectrophotometric Colorimeter |
| Instrument Type | Portable |
| Optical Geometry | 45/0 (45° annular illumination, 0° viewing) |
| Light Sources | D65, A, C, D50, D55, D75, F1–F12 (including CWF, TL84, TL83/U30, TPL5, DLF) |
| Spectral Range | 400–700 nm |
| Repeatability | Spectral Reflectance (MAV): ≤0.1% std. dev. |
| Colorimetric Values (MAV) | ΔE*ab ≤0.05 (after instrument warm-up and calibration |
| Brand | 3nh |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | YS4510Plus |
| Product Category | Spectrophotometer |
| Instrument Type | Portable |
| Optical Geometry | 45/0 (45° annular illumination, 0° viewing) |
| Light Source | LED |
| Spectral Range | 400–700 nm |
| Repeatability | ΔE*ab ≤ 0.05 (MAV mode) |
| Brand | 3nh |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Spectrophotometric Colorimeter |
| Instrument Type | Portable |
| Optical Geometry | 45/0 (45° annular illumination, 0° viewing) |
| Light Source | LED (with dedicated UV channel) |
| Spectral Range | 400–700 nm |
| Spectral Resolution | ≤10 nm (typical for concave grating design) |
| Repeatability | ΔE*ab ≤ 0.03 (MAV mode) |
| Aperture Options | Φ8 mm and Φ4 mm |
| Compliance Standards | GB 2893, GB/T 18833 |
| Color Spaces | CIE XYZ, LAB, LCH, Yxy, RGB, HSV, etc. |
| Color Difference Formulas | ΔE*ab, ΔE*cmc, ΔE*94, ΔE*00, ΔE(Hunter), ΔE(BFD), ΔE(RCM) |
| Fluorescence Measurement | Enabled via integrated UV LED |
| Software Interface | USB and Bluetooth connectivity with PC-based color management suite |
| Brand | 3nh |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Manufacturer |
| Product Type | Spectrophotometric Colorimeter |
| Instrument Type | Portable |
| Optical Geometry | 45/0 (45° annular illumination, 0° viewing) |
| Light Source | LED with selectable UV component |
| Spectral Range | 400–700 nm |
| Repeatability | ΔE*ab ≤ 0.04 (after warm-up and calibration, 30 measurements of white tile at 5 s intervals) |
| Brand | 3nh |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Spectrophotometric Colorimeter |
| Instrument Form Factor | Benchtop |
| Optical Geometry | d/8° integrating sphere (with specular component included) |
| Illuminant | LED-based full-spectrum illumination |
| Spectral Range | 360–780 nm |
| Repeatability (Reflectance) | ≤0.04% std dev (400–700 nm, Φ25.4 mm, SCI mode) |
| Repeatability (Colorimetric Values) | ΔE*ab ≤0.01 (Φ25.4 mm, SCI, after warm-up & calibration, 30 measurements of white tile at 5 s intervals) |
| Repeatability (Transmittance) | ≤0.05% std dev (400–700 nm, Φ25.4 mm, SCI mode) |
| Repeatability (Transmitted Color) | ΔE*ab ≤0.02 (Φ25.4 mm, SCI, same conditions) |
| Measurement Modes | Reflectance (D/8°), Transmittance (D/0°), with UV-included and UV-excluded options |
| Brand | A.KRÜSS / A.KRÜSS Optronic |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | AR4 |
| Product Type | Benchtop Abbe Refractometer |
| Temperature Control | Yes |
| Digital Display | No |
| Measurement Range | 1.3000 – 1.7000 nD |
| Accuracy | ±0.0002 nD |
| Brand | A.KRÜSS / A.KRÜSS Optronic |
|---|---|
| Origin | Germany |
| Model | DR301-95 |
| Sample Measurement Range | 1.3330–1.5318 nD |
| Measurement Accuracy | ±0.00015 nD |
| Temperature Range | 5–40 °C |
| Temperature Accuracy | ±0.5 °C |
| Resolution | 0.0001 nD |
| Display | Digital LCD |
| Power Supply | 9 V battery (detachable AC adapter optional) |
| Prism Material | Optical glass |
| Housing Material | Stainless steel sample stage + polymer body |
| Dimensions | 180 × 100 × 60 mm |
| Weight | 500 g |
| Brand | A.KRÜSS / A.KRÜSS Optronic |
|---|---|
| Origin | Germany |
| Model | DR6000 |
| Product Type | Benchtop Refractometer |
| Temperature Control | Peltier-based, 10–80 °C (±0.1 °C) |
| Digital Display | Yes |
| Refractive Index Range | nD 1.3200–1.5800 (standard), up to 1.7000 with extended Brix mode |
| Accuracy | ±0.0001 nD |
| Resolution | 0.0001 nD |
| Brix Range | 0–95 % |
| Brix Accuracy | ±0.1 % |
| Brix Resolution | 0.1 % |
| Prism Material | Sapphire |
| Light Source | 590 nm LED (>100,000 h lifetime) |
| Measurement Time | ~4 s |
| Interface | RS-232, USB, Ethernet |
| Data Storage | Integrated SQL database (99 methods, 999 results) |
| Compliance | GLP, FDA 21 CFR Part 11 ready, ICUMSA-compliant temperature compensation |
| IP Rating | IP65 (measurement cell) |
| Power Supply | 90–260 V AC, 50/60 Hz, 60 W |
| Operating Ambient | 15–35 °C |
| Sample Temp Range | 10–80 °C |
| Temperature Sensor | PT100 |
| Display | 5.7″ LCD (320 × 240 px), touchscreen |
| Brand | A.L.S. GmbH / Advanced Laser Diode Systems |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Imported |
| Model | DiLas DD50-2 |
| Core Components | Fiber-Coupled Semiconductor Laser Module, Integrated Laser Driver & TEC Controller, Active Air-Cooled Heat Sink |
| Max Output Current | 50 A |
| Max Output Voltage | 3–6 V (configurable) |
| Pulse Rise Time | 100 µs |
| Operating Modes | CW and Pulsed |
| Wavelength Options | 808 nm, 940 nm, 980 nm |
| Fiber Coupling | SMA905 connector, 400 µm or 600 µm core diameter |
| Thermal Load Capacity | Up to 120 W (HS 120) |
| TEC Integration | Integrated Peltier element with temperature sensor and active fan cooling |
| Control Interface | Front-panel keypad + RS232 |
| Analog Modulation | Supported (50 A version only) |
| Brand | A2PS/A2 Photonic Sensors |
|---|---|
| Origin | France |
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | POP |
| Pricing | Available Upon Request |
| Brand | Abbe / Ionbeam |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | OEM Manufacturer |
| Region Category | Domestic (China) |
| Model | AL-2000 |
| Pricing | Upon Request |
| Sample Diameter Capacity | Ø0–25 mm |
| Ultimate Vacuum | 5 × 10⁻³ Pa (without Ar gas) |
| Acceleration Voltage Range | 200–10,000 V |
| Brand | TP |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Manufacturer |
| Origin Category | Domestic |
| Model | WSY-5 |
| Pricing | Upon Request |
| Brand | Abel/Ionbeam |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Region Classification | Domestic (China) |
| Model | AL-1000 |
| Pricing | Upon Request |
| Maximum Sample Diameter | Ø25 mm and Ø50 mm |
| Minimum Particle Size | ~3 nm |
| Ion Beam Energy Range | 200–6000 V |
| Base Vacuum | ≤5×10⁻³ Pa (without Ar flow) |
| Sample Stage | Motorized Rotation |
| Cooling Option | Peltier-based Semiconductor Cooling (optional) |
| Integrated Functions | Plasma Cleaning + Ion Beam Sputtering + Reactive Ion Beam Etching (with reactive gas inlet) |
| Control System | Digital Automated Controller with Real-time Parameter Logging |
| Brand | Abel/Ionbeam |
|---|---|
| Origin | Beijing, China |
| Manufacturer | Yes |
| Country of Origin | China |
| Model | AL-1600 |
| Vacuum Base Pressure | ≤5×10⁻³ Pa (without Ar flow) |
| Acceleration Voltage Range | 200–6000 V |
| Sample Stage | Rotatable |
| Ion Source | Single Ion Gun |
| Cooling Option | Thermoelectric (optional) |
| Glovebox Integration | Yes |
| Primary Functions | Plasma Cleaning, Ion Beam Sputter Deposition, Reactive Ion Beam Etching (with reactive gas introduction) |
| Beam Uniformity | Optimized for Ø25 mm and Ø50 mm substrates |
| Typical Deposited Grain Size | ~3 nm |
| Low-Energy Ion Impact | Minimized substrate damage, suitable for thermally sensitive samples |
| In-situ Cleaning & Deposition | Integrated within single vacuum chamber |
| Control System | Digital, Programmable, Automated |
| Brand | Abel / Ionbeam |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | AL-2600 |
| Pricing | Upon Request |
| Brand | ABET Technologies |
|---|---|
| Origin | USA |
| Light Source | Xenon Arc Lamp (Ozone-Free) |
| Illumination Mode | External Illumination |
| Output Area | 35 mm Ø (standard), configurable up to 8" × 8" |
| Spectral Match | ASTM E927-19 Class A, IEC 60904-9 Ed. 3 (2020) Class A, JIS C 8912 Class A |
| Spatial Uniformity | ≤2% (with diffuser), Class B per ASTM/IEC/JIS |
| Temporal Stability (short-term) | ≤0.5% over 10 s |
| Temporal Stability (long-term) | ≤2% over 8 h |
| Working Distance | 50–200 mm (adjustable) |
| Beam Direction | Horizontal (optional 90° turning mirror) |
| Lamp Power | 150 W |
| Lamp Lifetime | 1500 hours |
| Cooling | HEPA-filtered forced-air system |
| Control Interface | Integrated photofeedback loop, digital shutter with timer, electronic lamp power regulation |
| Input Power | 110/240 VAC, 50/60 Hz, ≤10 A |
| Brand | Abner |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Product Type | Manual Translation Stage |
| Platform Dimensions | 120 × 80 mm |
| Load Capacity | 500–2000 kg |
| Stroke Range | 6–12 m |
| Actuation | Manual (Hand-Crank or Lever-Operated) |
| Category | Optical Laboratory Translation Stage |
| Brand | Abner |
|---|---|
| Travel Range (X/Y) | 12.5 mm each axis |
| Drive Mechanism | Micrometer-Driven with Differential Screws |
| Repeatability | ≤ ±1 µm |
| Guide System | Crossed-Roller Bearings |
| Base Material | Anodized Aluminum Alloy (6061-T6) |
| Mounting Pattern | Standard M4/M6 Threaded Holes on 25 mm Grid |
| Locking Mechanism | Dual Knob-Actuated Mechanical Clamp |
| Compliance | ISO 9001 Certified Manufacturing |
| Origin | Jiangsu, China |
| Product Type | Manual Precision Translation Stage |
| Brand | Abner |
|---|---|
| Origin | Jiangsu, China |
| Product Type | Manual Translation Stage |
| Platform Size | 60 mm × 60 mm |
| Actuation | Micrometer-Driven Manual Adjustment |
| Motion Axis | Z-axis (Vertical) |
| Guide Mechanism | Crossed Roller Bearings |
| Repeatability | < 10 µm |
| Material | Anodized Aluminum Alloy |
| Mounting Pattern | Standard 1/4"-20 and M6 threaded holes |
| Locking Mechanism | Integrated Micrometer Lock |
| Compliance | Designed for ISO/IEC 17025-aligned lab environments |
| Brand | Abner |
|---|---|
| Origin | Jiangsu, China |
| Model | 60×60 mm Manual XY Translation Stage |
| Product Type | Manual Translation Stage |
| Construction Material | Anodized Aluminum Alloy |
| Stage Dimensions | 60 mm × 60 mm (top surface) |
| Motion Axes | X and Y orthogonal manual translation |
| Guidance System | Crossed-roller bearings |
| Micrometer Resolution | 0.01 mm per revolution |
| Locking Mechanism | Dual-axis independent mechanical lock |
| Mounting Pattern | Standard ISO/Metric tapped holes on base and top plate |
| Surface Finish | Hard anodized (Type II, ~25 µm thickness) |
| Load Capacity | ≤5 kg (static, centered) |
| Repeatability | ±2 µm (typical, under controlled lab conditions) |
| Compliance | Designed for ISO/IEC 17025-aligned laboratory environments |
| Brand | Abner |
|---|---|
| Origin | Jiangsu, China |
| Model | 60×60 mm Dual-Axis Manual Translation Stage |
| Stage Surface | 60 mm × 60 mm |
| Drive Mechanism | Micrometer Adjusters (0.01 mm resolution) |
| Guiding System | Precision Crossed-Roller Bearings |
| Material | Anodized Aluminum Alloy (6061-T6) |
| Mounting | Standard M3 and M4 Tapped Holes on Base and Top Plate |
| Locking | Dual-Axis Mechanical Locking Screws |
| Product Type | Manual Translation Stage |
| Compliance | Designed for ISO/IEC 17025-aligned lab environments |
| Brand | Abner |
|---|---|
| Model | 80×80 |
| Type | Motorized Translation Stage |
| Travel per Axis | 30 mm |
| Repeatability | ≤ ±1.5 µm |
| Platform Dimensions | 80 × 80 mm |
| Base Material | Anodized Aluminum (Black) |
| Lead Screw | MISUMI Precision Ball Screw |
| Linear Guide | MISUMI Crossed Roller Bearing Rail |
| Motor | Shinano Kenshi Stepper Motor |
| Compliance | ISO 9001-manufactured components |
| Mounting Interface | Standard M4/M6 tapped holes on platform and base |
| Brand | Abner |
|---|---|
| Origin | Jiangsu, China |
| Model | AB-120XY |
| Travel | X 50 mm, Y 50 mm |
| Repeatability | ≤ ±2 µm |
| Platform Size | 120 × 120 mm |
| Construction | Anodized Aluminum (Black) |
| Lead Screw | MISUMI Precision Ball Screw |
| Linear Guide | MISUMI Crossed Roller Bearing |
| Motor | Shinano Kenshi Stepper Motor |
| Product Type | Motorized Translation Stage |
| Brand | Abner |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | ABN EBL Series |
| Component Category | Electron Optics Subsystem |
| Pricing | Upon Request |
| Brand | Abner |
|---|---|
| Origin | Jiangsu, China |
| Product Type | Manual Translation Stage |
| Platform Dimensions | 25 mm × 25 mm |
| Construction Material | Anodized Aluminum Alloy |
| Guide Mechanism | Precision Linear Bearing Rails |
| Adjustment Method | Manual Micrometer-Driven Translation |
| Repeatability | High (typical for precision mechanical stages) |
| Mounting Interface | Standard M3 and M4 Tapped Holes |
| Compliance | Designed for laboratory-grade optical alignment and micro-positioning applications |
| Brand | Abner |
|---|---|
| Origin | Jiangsu, China |
| Model | ABN-3DLCM-001 |
| Instrument Type | Point-Scanning Confocal Microscope |
| Resolution (X-Y) | ≤200 nm |
| Resolution (Z) | ≤500 nm |
| Laser Sources | Optional Multi-Wavelength Lasers |
| Detectors | PMT or Multi-Channel Photon Counting Detectors |
| Fluorescence Detection | PMT or Multi-Channel Photon Counting Detectors |
| Scanning Mode | XYZ |
| Objective Lenses | 10×, 20×, 50×, 100× |
| Host Computer | Lenovo Workstation |
| Software & Image Workstation | Fully Integrated Automatic Control |
| XY Stage Control | Motorized and Manual Options |
| Brand | Abner |
|---|---|
| Origin | Jiangsu, China |
| Model | ABN-6060 |
| Platform Dimensions | 60 mm × 60 mm |
| Construction Material | Anodized Aluminum Alloy |
| Drive Mechanism | Precision Ball Screw with Crossed-Roller Bearings |
| Positioning Accuracy | Micrometer-Level (Typical Repeatability ≤ ±1 µm) |
| Motor Options | Stepper or Servo Motor |
| Control Interfaces | Manual Handheld Controller, USB/RS-232/Ethernet PC Interface (LabVIEW Compatible), PLC Integration Support |
| Optional Features | Limit Switches, Rotary Encoder Feedback, Multi-Axis Stacking Kits |
| Brand | Abner |
|---|---|
| Origin | Jiangsu, China |
| Model | ABN-AFM-001 |
| Instrument Type | Material-oriented AFM |
| Sample Dimensions | Max 15 mm × 15 mm × 2 mm |
| Scan Range | 70 µm × 70 µm (X–Y), 17 µm (Z) |
| Lateral Resolution | ≤1 nm |
| Vertical Resolution | ≤0.1 nm |
| XY Noise | ≤0.01 nm RMS |
| Z Noise | ≤0.05 nm RMS |
| Scan Speed | Up to 10 Hz |
| Probe Compatibility | Si probes with spring constants from 0.01 N/m to 40 N/m |
| Scanner | High-precision closed-loop piezoelectric scanner |
| Environmental Requirements | 18–25 °C, ≤60% RH |
| Image Resolution | 512×512 to 2048×2048 pixels |
| Interface | USB and Ethernet |
| Power Supply | 220 V/50 Hz or 110 V/60 Hz |
| Brand | Abner |
|---|---|
| Origin | Jiangsu, China |
| Model | ABN-CRM-001 |
| Instrument Type | Point-Scanning Confocal Microscope |
| Lasers | Standard integrated 445 nm, 532 nm, and 633 nm diode lasers |
| Detector | EMCCD sensor with 1600 × 200 or 1600 × 400 pixel array |
| Scanning Module | High-resolution Nikon CCD camera for real-time image display and digital storage |
| Focusing Mechanism | Precise manual adjustment of eyepiece and objective lens to locate micron-scale samples and visually confirm laser focus position on target particles |
| Brand | Abner |
|---|---|
| Origin | Jiangsu, China |
| Model | ABN-IMM-001 |
| Configuration | Inverted |
| Eyepiece | Wide-field Achromatic SWF10X (Φ22 mm) |
| Image Analysis System | Integrated |
| Category | Domestic Manufacturer (Distributor-sourced) |