Peristaltic Pump
Filter
Showing 1–30 of 53 results
| Brand | Acmer |
|---|---|
| Origin | Hebei, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | 150F |
| Pump Type | Peristaltic Pump |
| Flow Rate Range | 0.0013–140 mL/min |
| Motor Speed | 0–150 rpm |
| Display | 3.0-inch HD TFT Touchscreen |
| Operating Modes | Flow Mode, Timer Mode, Volume Mode |
| Calibration | Multi-point flow calibration supported |
| External Control | RS-485 communication interface, analog/digital I/O for start/stop and speed modulation |
| Compatible Pump Heads | F154, F156, TH15 |
| Compatible Tubing Sizes | ID 1.6 mm (13#), 2.4 mm (14#), 3.2 mm (19#), 4.8 mm (16#), 6.4 mm (25#) |
| Flow Adjustment | Real-time in-run flow/speed adjustment |
| Parameter Guidance | Dynamic display of achievable flow range based on selected tubing and pump head |
| Brand | Acmer |
|---|---|
| Origin | Hebei, China |
| Model | 150F-BX |
| Pump Type | Peristaltic Pump |
| Flow Rate Range | 0.0013 mL/min – 140 mL/min |
| Speed Range | 0.1 – 150 rpm |
| Max. Speed | 150 rpm |
| Display | 3.0-inch HD capacitive touchscreen |
| Power Supply | DC 25.6 V / 1 A |
| Battery Capacity | 2.5 Ah (Li-ion) |
| Operating Time on Battery | ~4 hours at room temperature |
| Operating Environment | 0–40 °C, 20–85% RH (non-condensing) |
| Ingress Protection | IP31 |
| Dimensions (L×W×H) | 156 × 118 × 130 mm |
| External Control Inputs | 0–5 V, 0–10 V, 4–20 mA, 0–10 kHz |
| Communication Interface | RS485 (configurable address, 9600 bps) |
| Status Outputs | Run/Stop, Direction |
| Flow Quantification Units | µL, mL, L, mg, g, kg |
| Timing Range | 0.1 s – 6553.5 min (or hr) |
| Backflow Angle Adjustment | 0–999° |
| Compatible Pump Heads | F154, F156 |
| Compatible Tubing Sizes | #13, #14, #16, #19, #25 |
| Brand | Acmer |
|---|---|
| Origin | Hebei, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | BT-100B |
| Pump Type | Peristaltic Pump |
| Flow Rate Range | 0.00013–560 mL/min |
| Maximum Speed | 150 rpm |
| Pump Head Compatibility | YZ1513, YZ2513S, BZ, DG, DMD1513 |
| Control Modes | Manual Keypad & External Analog/Digital Input |
| Display | Real-time RPM, Direction, and Operational Status |
| Direction | Bidirectional (Forward/Reverse) |
| Keypad Lock | Configurable via Key Combination |
| Max Speed Limit | User-Settable via Front Panel |
| Brand | Acmer |
|---|---|
| Model | BT-100U |
| Pump Type | Peristaltic Pump |
| Flow Rate Range | 0.00013–560 mL/min |
| Maximum Speed | 150 rpm |
| Compatible Pump Heads | YZ1513, YZ2513S, BZ, DG, DMD1513 |
| Control Interfaces | Keypad, Foot Switch, Analog Voltage Input (0–5 V / 0–10 V), RS485 (Modbus RTU) |
| Display | Real-time Speed, Direction, and Operational Status |
| Direction Control | Bidirectional (Forward/Reverse) |
| Speed Limit Setting | User-configurable maximum rpm via keypad |
| Keypad Lock | Password-free key combination lock to prevent accidental parameter changes |
| Optional Leak Detection | External sensor integration with configurable response logic (e.g., stop pump, alarm, log event) |
| Brand | Acmer |
|---|---|
| Origin | Hebei, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | BT-300B |
| Pump Type | Peristaltic Pump |
| Flow Rate Range | 0.0063–1490 mL/min |
| Maximum Speed | 400 rpm |
| Pump Head Compatibility | YZ1513, YZ2513S, BZ, DMD1513 |
| Control Modes | Manual Keypad + External Analog/Digital Input (0–5 V / 0–10 V / 4–20 mA / TTL) |
| Display | Real-time RPM, Direction, and Operational Status |
| Direction | Bidirectional (Forward/Reverse) |
| Keypad Lock | Configurable via Key Combination |
| Max Speed Limit | User-Settable via Front Panel |
| Brand | Acmer |
|---|---|
| Origin | Hebei, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | BT-300U |
| Pump Type | Peristaltic Pump |
| Flow Rate Range | 0.0063–1950 mL/min |
| Maximum Speed | 400 rpm |
| Control Interfaces | Keypad, Footswitch, Analog/Digital External Input, RS485 (Modbus RTU) |
| Display | Real-time RPM, Rotation Direction, Operational Status |
| Direction Control | Bidirectional (Forward/Reverse) |
| Speed Limit Setting | User-configurable maximum RPM via keypad |
| Keypad Lock | Combination-key lock to prevent accidental parameter changes |
| Leak Detection Support | Optional leak sensor module with programmable response logic (e.g., stop, alarm, pause) |
| Brand | Acmer |
|---|---|
| Origin | Hebei, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | BT-600B |
| Pump Type | Peristaltic Pump |
| Flow Rate Range | 0.0063–2600 mL/min |
| Maximum Speed | 600 rpm |
| Compatible Pump Heads | YZ1513, YZ2513S, BZ, DMD1513 |
| Control Modes | Manual Keypad + External Analog/Digital Input (0–5 V / 4–20 mA / TTL) |
| Display | Real-time RPM, Rotation Direction, Operating Status |
| Direction | Bidirectional (Forward/Reverse) |
| Keypad Lock | Configurable via Key Combination |
| Max Speed Limit | User-Settable via Front Panel |
| Brand | Acmer |
|---|---|
| Origin | Hebei, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | BT-600U |
| Pump Type | Peristaltic Pump |
| Flow Rate Range | 0.0063–2600 mL/min |
| Maximum Speed | 600 rpm |
| Control Interfaces | Keypad, Footswitch, Analog/Digital External Input, RS485 (Modbus RTU) |
| Display | Real-time RPM, Rotation Direction, Operational Status |
| Direction Control | Bidirectional (Forward/Reverse) |
| Speed Limit Setting | User-configurable maximum RPM via keypad |
| Keypad Lock | Combination-key lock to prevent accidental parameter changes |
| Leak Detection Support | Optional integrated leak sensor module (configurable response logic) |
| Brand | Acmer |
|---|---|
| Origin | Hebei, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | LabMate |
| Instrument Type | Peristaltic Pump |
| Flow Rate Range | 0.032 mL/min – 48 mL/min |
| Speed Range | 0.01 – 150 rpm |
| Speed Resolution | 0.01 rpm |
| Tube ID ≤ 3.17 mm, Wall Thickness | 0.76 – 1.0 mm |
| Quantitative Range | 0.1 µL – 9999.999 L |
| Timing Range | 0.1 s – 999.9 hr |
| Cycle Count | 0 – 65535 (0 = continuous) |
| Retraction Angle | 0 – 65535° |
| Housing Material | POM / PVDF |
| Roller Count | 10 |
| Roller Material | PET or Nylon + MoS₂ |
| Dimensions | 252.5 × 126 × 165 mm |
| Power Supply | AC 90–264 V, 50/60 Hz |
| Operating Environment | 0–40 °C, 20–80% RH (non-condensing) |
| Ingress Protection | IP31 |
| Brand | Acmer |
|---|---|
| Origin | Hebei, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | WG600-2J |
| Pump Type | Peristaltic Pump |
| Flow Rate Range | 0.1–12,000 mL/min (tube-dependent) |
| Speed Range | 40–600 rpm |
| Speed Resolution | 1 rpm |
| Power Consumption | <300 W |
| Input Voltage | AC 180–260 V, 50 Hz |
| Operating Environment | 0–40 °C, <80% RH (non-condensing) |
| Dimensions (L×W×H) | 370 × 235 × 240 mm (excl. pump head) |
| Weight | 11.5 kg |
| Ingress Protection | IP31 |
| Display | 4-digit LED (speed/flow toggle) |
| Timing Range | 1 s – 99 h |
| Direction Control | Forward/Reverse |
| External Control Options | 0–5 V analog, 4–20 mA current loop, 0–10 kHz frequency input |
| Communication Interface | RS485 (Modbus RTU protocol) |
| Output Signals | Run/Stop status, direction status, 0–10 kHz pulse output |
| Optional Accessories | Foot switch, external control modules, pump heads for tubing ID 1.6–16 mm |
| Brand | Acmer |
|---|---|
| Origin | Hebei, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | YG600-2J |
| Pump Type | Peristaltic Pump |
| Flow Rate Range | 0–12,000 mL/min (dependent on tubing ID and fluid properties) |
| Speed Range | 0–600 rpm |
| Control Method | PWM-controlled DC motor |
| Reversibility | Yes, via toggle switch |
| Display | Digital speed indicator (0–100% scale, 100% = 600 rpm) |
| Power Consumption | <400 W |
| Input Voltage | AC 200–260 V, 50/60 Hz |
| Operating Environment | 0–40 °C, RH <80% non-condensing |
| Enclosure Rating | IP31 |
| Net Weight | 16 kg |
| Dimensions | Not specified in source data |
| Compliance | CE-marked per IEC 61000-6-3/6-2 |
| Brand | Acmer |
|---|---|
| Origin | Hebei, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | YT600-2J |
| Pump Type | Peristaltic Pump |
| Flow Rate Range | Up to 6000 mL/min (dependent on tubing ID and fluid properties) |
| Speed Range | 0–600 rpm |
| Power Consumption | <80 W |
| Input Voltage | AC 90–260 V, 50/60 Hz |
| Operating Temperature | 0–40 °C |
| Relative Humidity | <80% non-condensing |
| Enclosure Rating | IP31 |
| Net Weight | 5.5 kg |
| Dimensions | Not specified in source data |
| Control Method | PWM-controlled DC motor with analog potentiometer |
| Direction | Reversible via toggle switch |
| Display | Digital LED showing speed percentage (0–100%, where 100 = 600 rpm) |
| Power Indicator | Illuminated rocker switch |
| Brand | Analysis |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | HDJS20 |
| Instrument Type | Peristaltic Pump |
| Flow Rate Range | 0.006–1340 mL/min |
| Flow Accuracy | <0.5% |
| Speed Range | 0.1–350 rpm |
| Speed Resolution | 0.1 rpm |
| Power Supply | AC 220V±10%, 50/60 Hz (standard) |
| Power Consumption | <40 W |
| External Control Interfaces | TTL-level input (5 V / 12 V standard, 24 V optional), Analog input (0–5 V standard |
| Operating Temperature | 0–40 °C |
| Relative Humidity | <80% RH |
| Enclosure Rating | IP31 |
| Dimensions (L×W×H) | 255 × 181 × 198 mm |
| Weight | 4.7 kg |
| Brand | Autoscience |
|---|---|
| Origin | Tianjin, China |
| Model | ATP-3200 |
| Flow Rate Range | 0.21–2060 mL/min (dependent on tubing size) |
| Speed Range | 1–460 rpm |
| Speed Resolution | 0.1 rpm |
| Speed Stability | ≤ ±0.3 rpm |
| Max Pressure | 1.5 kg/cm² |
| Max Fluid Viscosity | 2000 cP |
| Operating Temperature | –10–100 °C (fluid), 0–50 °C (ambient) |
| Humidity | <80% RH |
| Dimensions (W×H×D) | 120 × 230 × 270 mm |
| Power Supply | 220 ±15% V, 50 Hz |
| Power Consumption | 150 W |
| Net Weight | 5.5 kg |
| Direction Control | Forward/Reverse |
| Tubing Compatibility | #14, #17, #18, #25 (Pharmed®/Norprene®-compatible) |
| Brand | Autosense |
|---|---|
| Model | ATP-3200 |
| Flow Rate Range | 0.25–2060 mL/min (dependent on tubing size) |
| Speed Range | 1–460 rpm, continuously adjustable |
| Speed Resolution | 0.1 rpm |
| Speed Stability | ≤ ±0.3 rpm |
| Tubing Compatibility | 14#, 16#, 25#, 17#, 18# (Pharmed®/Norprene®-equivalent silicone or thermoplastic elastomer tubing) |
| Max Fluid Pressure | 1.5 kg/cm² (≈147 kPa) |
| Operating Temperature | –10°C to 100°C (fluid), 0°C to 50°C (ambient) |
| Relative Humidity | <80% RH |
| Power Supply | 220 V ±15%, 50/60 Hz |
| Power Consumption | 150 W |
| Dimensions (W×H×D) | 120 × 230 × 270 mm |
| Net Weight | 5.5 kg |
| Direction Control | Forward/Reverse |
| Display | 4-digit LED, showing speed and flow (for three standard tubing sizes) |
| External Interface | TTL/RS-232-compatible control port for programmable automation |
| Compliance | Designed for GLP-compliant lab environments |
| Brand | Bartels |
|---|---|
| Origin | Germany |
| Model | BP7 |
| Pump Type | Piezoelectric Dual-Chamber Micro Diaphragm Pump |
| Flow Rate Range | 100–14,000 µL/min |
| Dimensions | 30 × 15 × 3.8 mm |
| Weight | 2 g |
| Wetted Material | PPSU (Polyphenylsulfone) |
| Operating Temperature | 0–70 °C |
| Lifetime | ≥5,000 h |
| Sterilization Compatibility | Autoclavable (Steam, Ethylene Oxide, Gamma) |
| Control Interface | Analog/Digital (Open-Source Driver Support) |
| Brand | Acmer |
|---|---|
| Origin | Hebei, China |
| Manufacturer Type | Authorized Distributor |
| Instrument Type | Peristaltic Pump |
| Model | BT-100D |
| Flow Rate Range | 0.00013–560 mL/min |
| Speed | 150 rpm |
| Control Interface | RS485/USB (configurable address, baud rate 1200–9600 bps) |
| External Control | 5–24 V TTL-level start/stop signal |
| Status Outputs | Run/Stop, Direction, Alarm |
| Leak Detection | Optional visual and audible alarm |
| Calibration Modes | Volumetric and flow-based |
| Density Compensation | Supported for mass-based dispensing |
| Real-time Adjustment | On-the-fly volume/flow fine-tuning during operation |
| Pause Function | Supported in both distribution and transfer modes |
| Display Guidance | Dynamic range validation for user-defined parameters |
| Brand | Acmer |
|---|---|
| Origin | Hebei, China |
| Manufacturer Type | Authorized Distributor |
| Instrument Type | Peristaltic Pump |
| Model | BT-300D |
| Flow Rate Range | 0.0063–1730 mL/min |
| Speed | 400 rpm |
| Control Interface | External TTL/DC (5–24 V) |
| Alarm Output | Visual & Audible Leak Detection (Optional) |
| Unit Mode | Volumetric (mL, µL) or Gravimetric (g, mg) via Density Input |
| Operation Modes | Dispensing, Transfer, Continuous, Timed, Volume-Based |
| Calibration | Multi-point Flow/Liquid Volume Calibration |
| Real-time Adjustment | Flow rate and dispense volume adjustable during operation |
| Pause Function | Supported during dispensing or transfer |
| Status Outputs | Run/Stop, Direction, Fault Alarm |
| Brand | Acmer |
|---|---|
| Origin | Hebei, China |
| Manufacturer Type | Authorized Distributor |
| Instrument Type | Peristaltic Pump |
| Model | BT-600D |
| Flow Rate Range | 0.0063–2600 mL/min |
| Maximum Speed | 600 rpm |
| Control Interface | External TTL/DC (5–24 V), Digital Status Outputs (Start/Stop, Direction, Alarm) |
| Calibration Options | Volumetric, Gravimetric, and Flow-Based |
| Leak Detection | Optional Visual/Audible Alert |
| Operating Modes | Distribution, Continuous Transfer, Timed Dispense, Volume-Based Dispense |
| Real-Time Adjustment | On-the-fly flow rate and dispense volume modulation |
| Unit Flexibility | Volume (mL, µL) or Mass (g) input with density compensation |
| Parameter Guidance | Dynamic range validation feedback during setup |
| Pause Functionality | Full operational pause/resume during active dispensing or transfer |
| Brand | Cole-Parmer |
|---|---|
| Origin | USA |
| Model | 74900-05 (Single-Channel), 74900-15/74900-25/74900-65/74901-05 (Dual-Channel), 74900-35/74900-45/74900-85/74901-15 (10-Channel) |
| Accuracy | ±0.5% |
| Repeatability | ±0.1% |
| Flow Rate Range (Single) | 0.2 µL/h–500 mL/h |
| Flow Rate Range (Dual/10-Channel) | 1 nL/h–147 mL/min |
| Syringe Capacity | 10 µL–140 mL |
| Linear Force | 9.1 kg (Single), 18.1 kg (Dual/10-Channel) |
| Power Supply | 230 V, 50/60 Hz |
| Certifications | CE |
| Interface | RS232, TTL I/O (Programmable Models) |
| Dimensions (L×W×H, cm) | 23×10×15 (Single), 28×12.7×23.5 (Dual), 28×15.2×30.5 (10-Channel) |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Easy-Load |
| Pricing | Available Upon Request |
| Flow Rate | 0.01–1700 mL/min (with L/S 24 tubing) |
| Speed Range | 1.6–600 rpm |
| Speed Resolution | 0.1 rpm (≤100 rpm), 1 rpm (>100 rpm) |
| Motor | 1/10 HP, brushless DC with soft-start and back-EMF regulation |
| Accuracy | ±2% of set speed |
| Enclosure Rating | IP23 |
| Power Supply | 115 VAC (NEMA 5-15P) or 230 VAC (IEC 320 C14) |
| Cable Length | 1.8 m |
| Brand | Interscience |
|---|---|
| Origin | France |
| Model | FlexiPump |
| Construction | 304L Stainless Steel Housing |
| Dispensing Range | 50 µL to 99 L per cycle |
| Tube ID | 3.2 mm |
| Accuracy | ±1.8% at 9 mL, ±1.0% at 18 mL, ±0.5% at 225 mL |
| Dispensing Modes | Continuous, Single-Dispense, Multi-Dispense (up to 32 programmable protocols) |
| Inter-Dispense Interval | 0.1–99.9 s adjustable |
| Max Flow Rate | 1.25 L/min (single Watson Marlow™ pump head) |
| Pump Head Speed | 10–550 rpm |
| Tubing Material | Tygon™ (pump head), Silicone (interconnect) |
| Power Supply | 100–240 V∼, 50–60 Hz |
| Power Consumption | 50 W |
| IP Rating | IP31 |
| Compliance | ISO 7218, ISO 6887, FDA BAM |
| Warranty | 1 year (registration required) |
| Spare Parts Availability | ≥10 years |
| Dimensions (W×D×H) | 16.1 × 27.3 × 20.8 cm |
| Net Weight | 5.40 kg |
| Brand | Interscience |
|---|---|
| Origin | France |
| Model | FlexiPump Pro |
| Construction | 304L stainless steel housing |
| Pump Head Type | Dual Watson Marlow™ peristaltic pump heads |
| Tubing ID Options | 3.2 mm and 6.4 mm |
| Dispensing Range | 50 µL to 99 L per cycle |
| Accuracy (3.2 mm tubing) | ±0.9% at 9 mL, ±0.5% at 18 mL, ±0.4% at 225 mL |
| Flow Rate | 3 mL/min to 2.5 L/min |
| Speed Range | 10–550 rpm |
| Dispense Modes | Continuous, Single, Multi-step (programmable intervals from 0.1–99.9 s) |
| Programmable Protocols | 32 user-defined methods |
| Traceability | Operator ID, timestamp, calibration date, speed, tubing ID, volume, mode — exportable via USB-A (printer/U-disk) or USB-B (PC) as CSV |
| Compliance | ISO 7218, ISO 6887, FDA BAM |
| IP Rating | IP31 |
| Power Supply | 100–240 V∼, 50–60 Hz |
| Power Consumption | 60 W |
| Warranty | 1 year (registration required) |
| Spare Parts Availability | Guaranteed for 10 years |
| Dimensions (FlexiPump only) | 16.1 × 33.2 × 20.8 cm |
| Weight (FlexiPump only) | 5.55 kg |
| Certifications | CE, RoHS |
| Brand | Interscience |
|---|---|
| Origin | France |
| Model | FlexiPump Scale |
| Construction | Full 304L stainless steel |
| Pump Type | Dual-head peristaltic (Watson Marlow™ low-pulse) |
| Flow Rate | Up to 6 L/min (with Jumbo kit) |
| Dispensing Range (volumetric) | 50 µL – 99 L |
| Dispensing Range (gravimetric) | 1 mL – 6.5 L |
| Weighing Capacity | 0.1 – 6,500 g |
| Weighing Resolution (≤200 g) | 0.01 g |
| Weighing Accuracy | ±0.05 g (0–100 g), ±0.05% (100–6,500 g) |
| Tubing ID | 3.2 mm (standard), compatible with 6.4 mm |
| Dispensing Precision (3.2 mm tubing) | ±0.9% (9 mL), ±0.5% (18 mL), ±0.4% (225 mL) |
| Gravimetric Mode Accuracy | ±0–1% (Precise mode), ±0–2% (Fast/Normal mode, per dispense) |
| Programmable Methods | 32 |
| Interval Time (multi-dispense) | 0.1–99.9 s |
| Max Throughput | 40 × 9 mL tubes/min, 29 × 18 mL Petri dishes/min, 8 × 220 mL sample bags/min |
| Motor Speed | 10–550 rpm |
| Connectivity | 2× USB-A (printer/U-disk), 1× USB-B (PC), 3.5 mm jack, load cell interface |
| Power | 100–240 V~, 50–60 Hz, 70 W |
| IP Rating | IP31 |
| Compliance | ISO 7218, ISO 6887, FDA BAM |
| Warranty | 1 year (registration required) |
| Spare Parts Availability | 10 years |
| Standard Accessories | Dual Watson Marlow™ pump heads, weighing platform (Ø17 cm × 5.4 cm), 3.2 mm & 6.4 mm dispensing kits (nozzles, GL45 adapters, filters, tubing, tube anchors), power & USB cables, user manual, certificate of conformity, free homogenization bags |
| Brand | Masterflex |
|---|---|
| Origin | USA |
| Model | MASTERFLEX ISMATEC REGLO |
| Pump Type | Digital Positive-Displacement Piston Pump |
| Display | 5" (12.7 cm) Capacitive TFT/RGB Touchscreen |
| Operating Modes | Continuous, Volumetric Dispensing, Timed Dispensing |
| Flow Control | Adjustable Speed, Drip Prevention |
| Pump Head Design | Valveless Plunger-Type (PH00) |
| Maintenance | Single-Moving-Part Architecture |
| User Access Levels | Three-Tier Authentication (Operator, Supervisor, Administrator) |
| Software Integration | MasterflexLive® Cloud Monitoring Platform |
| Compliance Context | Designed for GLP/GMP-aligned lab environments |
| Brand | Masterflex |
|---|---|
| Origin | USA |
| Model | ISMATEC® REGLO-IP |
| Drive Type | Digital Planetary Gear Motor with Stainless Steel Rotors |
| Channels | 16 |
| Power Supply | 230 VAC, 60 Hz |
| Display | 5" Capacitive TFT/RGB Touchscreen (12.7 cm) |
| Control Interface | Touchscreen + Analog/TTL External Signal Input |
| Operating Modes | Continuous, Metered Dispensing, Timed Dispensing |
| Programmable Parameters | Flow Rate, Volume, Time, Interval/Off-Time, Speed Ramp |
| User Access Levels | Three-Tier Authentication (Operator, Supervisor, Administrator) |
| Pump Head Compatibility | Micropump A- and B-Series Gear Pump Heads |
| Flow Range | 1.7–4680 mL/min (per channel, dependent on tubing and pump head) |
| Tube Life Optimization | Auto-engagement cartridge housing with consistent occlusion pressure |
| Compliance | Designed for GLP/GMP environments |
| Brand | Masterflex |
|---|---|
| Origin | USA |
| Product Type | Peristaltic Pump Accessory |
| Compatible Drive System | ISMATEC® REGLO-IPC / IPC-N Series |
| Channel Count | 4 |
| Input Voltage | 230 VAC, 60 Hz |
| Mounting Type | Adjustable Clamp for Tubing Retention |
| Material | Stainless Steel Housing with Precision-Machined Polymer Components |
| Compliance | CE, RoHS, UL Recognized (per system integration) |
| Brand | Masterflex |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | MASTERFLEX ISMATEC REGLO-IPC |
| Instrument Type | Peristaltic Pump |
| Power Supply | 230 VAC, 60 Hz |
| Channel Count | 24 |
| Drive Mechanism | Planetary Gear Motor with 8 Stainless Steel Rotors |
| Display | 5" Capacitive TFT/RGB Touchscreen (12.7 cm), or 4-Digit LED (IPC/IPC-N variant) |
| Control Interface | Touchscreen, 6-Key Keypad, Analog Voltage (0–10 V), TTL Digital Signals |
| Operating Modes | Continuous, Dispense-by-Volume, Dispense-by-Time (with programmable interval/off-time) |
| User Access Levels | Three-Tier Permission System |
| Pump Head Compatibility | Micropump A-Series and B-Series Gear Pump Heads |
| Flow Range | 1.7–4680 mL/min (per channel, dependent on tubing size and pump head) |
| Tube Clamp | Adjustable, Tool-Free Snap-In Cartridge Design |
| Brand | Masterflex |
|---|---|
| Origin | USA |
| Pump Type | Digital Multi-Channel Peristaltic Pump |
| Compatible Pump Heads | Micropump A- and B-Series |
| Flow Range | 1.7–4680 mL/min |
| Drive Mechanism | Planetary Gear Motor with 8 Stainless Steel Rotors |
| Control Interface | 5" Capacitive TFT/RGB Touchscreen (12.7 cm) + 6-Key Keypad + Analog/TTL External Input |
| Operating Modes | Continuous, Dispense-by-Volume, Dispense-by-Time (with configurable interval/off-time) |
| Program Storage | User-Saved Dispense Protocols |
| Flow Stability | Optimized via Low-Pulsation Planetary Drive Architecture |
| Tube Life Extension | Enabled by Precise Roller Compression Control & Consistent Occlusion Geometry |
| User Access Levels | Three-Tier Password-Protected Authorization (Operator, Supervisor, Administrator) |
| Compliance | Designed for GLP/GMP Environments |
| Power Supply | 230 VAC, 60 Hz |
| Brand | J-KEM |
|---|---|
| Origin | USA |
| Model | SYR-1200 Series |
| Pump Type | Syringe Pump |
| Flow Rate Range | 0.5 µL/min to 200 mL/min |
| Syringe Compatibility | 25 µL – 50 mL |
| Number of Channels | 1 or 2 (expandable to 32 via system integration) |
| Dispensing Ports per Manifold | 3–8 |
| Tubing Material | PTFE and Borosilicate Glass |
| Tubing Diameter Options | 1/16" or 1/8" OD |
| Control Interface | PC-based Kem-Pump Software (Windows-compatible) |
| System Architecture | Closed, chemically inert fluid path |