Power Analyzer
Filter
Showing all 6 results
| Brand | Auniontech |
|---|---|
| Origin | Shanghai, China |
| Model Series | AUT-5W-N, AUT-40W-N, AUT-100W-N |
| Spectral Range | 0.19–15 µm (AUT-5W-N), 0.19–25 µm (AUT-40W-N & AUT-100W-N) |
| Power Range | 100 µW–5 W |
| Linearity | < ±1% |
| Accuracy | < ±3% |
| Response Time | < 1 s (AUT-5W-N & AUT-40W-N), < 2 s (AUT-100W-N) |
| Aperture Diameter | 10 mm |
| Max Avg. Power Density | 1.5 kW/cm² |
| Max Energy Density | 0.3 J/cm² @ 1064 nm, 1 ns (AUT-5W-N) |
| Resolution | 5 µW |
| Cooling | Passive (Natural Convection) |
| Interface | DB-9M |
| Cable Length | 1.5 m |
| Brand | Gentec-EO |
|---|---|
| Origin | Canada |
| Product Type | Thermopile & Pyroelectric Laser Power/Energy Sensors with Compatible Meters |
| Spectral Range | 0.19–20 µm |
| Power Measurement Range | 5 nW – 25 kW |
| Energy Measurement Range (Pulsed) | 50 nJ – 150 J |
| Max Avg. Power Density | 110 W/cm² – 100 kW/cm² |
| Pulse Width Support | 5 µs – 7 ms |
| Sensitivity (Energy) | 2 V/J – 1100 V/J |
| Sensitivity (Power) | 0.02 mV/W – 25 mV/W |
| Detector Aperture Options | 8 mm – 95 mm |
| Output Interfaces | USB, RS-232, 0–1 V Analog |
| Compliance | CE, RoHS, NIST-traceable calibration available |
| Brand | Keysight Technologies |
|---|---|
| Origin | USA |
| Model | PD1500A |
| Application | Dynamic characterization of power semiconductors (SiC, GaN, IGBT, MOSFET) |
| Measurement Capabilities | Turn-on/turn-off transient waveforms, switching loss (Eon/Eoff), reverse recovery (Qrr, trr), gate charge (Qg, Qgs, Qgd), voltage/current slew rates (dv/dt, di/dt) |
| Time Resolution | Sub-nanosecond sampling synchronization |
| Safety Compliance | UL/CSA 61010-1, CAT III 1000 V input protection |
| Platform Architecture | Modular, hardware-protected, user-isolated test environment |
| Software Compliance | Supports FDA 21 CFR Part 11–compliant audit trails and electronic signatures (via PathWave B2900A-compatible firmware) |
| Brand | testo |
|---|---|
| Origin | Germany |
| Model | testo 608-H1 |
| Operating Temperature Range | 0 to +50 °C |
| Storage Temperature Range | −40 to +70 °C |
| Temperature Accuracy | ±0.5 °C |
| Temperature Resolution | 0.1 °C |
| Humidity Range | 10 to 95 %RH |
| Humidity Accuracy | ±3 %RH |
| Humidity Resolution | 0.1 %RH |
| Dew Point Calculation | Yes |
| Measurement Interval | 18 s |
| Battery Type | 9 V block battery |
| Battery Life | 8736 h (typ.) |
| Weight | 168 g |
| Dimensions | 120 × 89 × 40 mm |
| Housing Material | ABS |
| Temperature Sensor Type | NTC |
| Humidity Sensor Type | Capacitive |
| Brand | Topo |
|---|---|
| Model | WGN-1 |
| Detector Type | Silicon Photodiode |
| Spectral Range | 400–1050 nm |
| Power Range | 2 µW – 200 mW |
| Active Area | 1 cm² |
| Display | 3.5-digit LCD |
| Resolution | 0.001 µW |
| Calibration Wavelength | 632.8 nm |
| Measurement Uncertainty | ±3% ±1 digit |
| Operating Temperature | 0–35 °C |
| Relative Humidity | ≤80% RH (non-condensing) |
| Power Supply | 220 V, 50 Hz, 10 W |
| Compliance | Designed for ISO/IEC 17025 traceable calibration workflows |
| Brand | Yingbo Science & Instrument |
|---|---|
| Origin | Shanghai, China |
| Model | GaN Wafer-Level Dynamic Power Testing System |
| Application | Dynamic Parameter Characterization of GaN Power Devices under Switching Operation |
| Temperature Range | 25 °C to 175 °C |
| Gate Voltage Range | –12 V to +12 V (continuously adjustable) |
| Switching Frequency Range | 10 kHz to 500 kHz |
| Duty Cycle Range | 10% to 90% |
| Minimum Pulse Width | 1 µs |
| Measurement Modes | Dynamic R<sub>DS(on)</sub> (HSW/ZVS), Dynamic V<sub>SD</sub>, Dynamic V<sub>th</sub>, Pulse I–V, Dynamic HTOL/SALT |