Precision Geometric Measurement Instruments
Filter
Showing 1–30 of 245 results
| Brand | Aberlink |
|---|---|
| Origin | United Kingdom |
| Configuration | Bridge-Type |
| Operation Mode | Fully Automated |
| Instrument Orientation | Vertical |
| Measurement Principle | Contact-Based Tactile Probing |
| Structural Base | Granite Table with Honeycomb Aluminum Core |
| Bearing System | Self-Cleaning Preloaded Air Bearings on All Three Axes |
| Drive Mechanism | Zero-Backlash Frictionless Transmission |
| Control Architecture | Integrated Industrial PC and Motion Controller |
| Mounting Interface | Standard M6 Threaded Grid Across Table Surface |
| Compliance | Designed for ISO 10360-2 (CMM Performance Verification) and ISO 14253-1 (Geometrical Product Specifications) |
| Brand | Aberlink |
|---|---|
| Origin | United Kingdom |
| CMM Type | Bridge Configuration |
| Orientation | Vertical |
| Operation Mode | Fully Automatic |
| Measurement Principle | Contact-Based Tactile Probing |
| Structural Frame Material | Aerospace-Grade Aluminum Alloy |
| Load-Bearing Platform Capacity | Up to 6,000 kg |
| Base Interface | Direct-Foot Ground Coupling |
| Compliance | Designed for ISO 10360 and VDI/VDE 2617 Part 2 conformance |
| Brand | Aberlink |
|---|---|
| Origin | United Kingdom |
| Model | Fulcrum |
| Configuration | Cantilever-type |
| Operation Mode | Manual |
| Portability | Portable |
| Measurement Method | Contact-based (tactile probing) |
| Measurement Volume | 280 × 280 × 150 mm |
| Accuracy | (5.0 µm + L/1000 mm) |
| Standard Operating Temperature Range | 5 – 45 °C |
| Power Supply | Single-phase AC, no compressed air required |
| Primary Application | In-process rough inspection near machine tools |
| Brand | Aberlink |
|---|---|
| Origin | United Kingdom |
| CMM Type | Bridge Configuration |
| Operation Mode | Fully Automatic |
| Instrument Orientation | Vertical |
| Measurement Principle | Contact-Based Tactile Probing |
| Drive System | Frictionless Linear Motor Drive |
| Structural Design | Decoupled Motor Architecture (Motors Isolated from Granite Base) |
| Worktable | M6 Threaded Grid Mounting Surface |
| Integrated Control | Embedded Industrial PC and Motion Controller |
| Base Construction | Vibration-Damped Granite Base |
| Compliance Context | Designed for ISO 10360-compliant dimensional verification in production and QA environments |
| Brand | Aberlink |
|---|---|
| Origin | United Kingdom |
| Structure Type | Bridge |
| Operation Mode | Manual |
| Instrument Orientation | Vertical |
| Measurement Principle | Contact-Based Tactile Probing |
| Bearing System | Preloaded Self-Regulating Air Bearings |
| Drive System | Closed-Loop Servo Motor |
| Frame Material | High-Grade Aerospace Aluminium Alloy |
| Worktable Surface | Granite (Load Capacity: 1500 kg) |
| Probe Compatibility | Renishaw Multi-Series Touch Probes |
| Optional Software Module | CAD-Based Best-Fit Alignment & Deviation Analysis |
| Brand | Accretech |
|---|---|
| Origin | Japan |
| Model | 248881006 |
| Type | Portable Contact-Type Profilometer |
| Measurement Principle | Stylus-Based Inductive Displacement Sensing |
| Standard Compliance | ISO 4287, ISO 4288, ISO 13565-1/2/3, ASME B46.1, JIS B 0601 |
| Probe Type | Diamond Tip (2 µm Radius, 90° Included Angle) |
| Vertical Resolution | ≤ 0.001 µm |
| Scan Length | Up to 16 mm (Standard), Expandable via Multi-Trace Mode |
| Cutoff Wavelengths | 0.08, 0.25, 0.8, 2.5, 8.0 mm (Selectable) |
| Evaluation Parameters | Ra, Rz, Rq, Rp, Rv, Rt, Rsk, Rku, Rsm, Rmr, Rdc, RΔq, Rk, Rpk, Rvk, Mr1, Mr2 |
| Data Storage | Internal Flash Memory (≥ 10,000 Profiles), USB Export |
| Display | High-Contrast Monochrome LCD with Backlight |
| Power | Rechargeable Li-ion Battery (≥ 10 h Continuous Operation) |
| Environmental Rating | IP54 (Dust and Splash Resistant) |
| Operating Temperature | 5–40 °C |
| Calibration | Traceable to NMIJ/JCSS Standards |
| Brand | Accretech |
|---|---|
| Origin | Japan |
| Model | 248881006 |
| Type | Portable Contact-Type Profilometer |
| Measurement Principle | Stylus-Based Inductive Displacement Sensing |
| Standard Compliance | ISO 4287, ISO 4288, ISO 13565, ASME B46.1, JIS B 0601 |
| Surface Parameters Measured | Ra, Rz, Ry, Rq, Rp, Rv, Rt, Rsk, Rku, Rsm, Rmr, etc. |
| Stylus Tip Radius | 5 µm (standard diamond), 2 µm (optional) |
| Stylus Force | 0.75 mN (standard), 4 mN (high-force mode) |
| Scan Length | Up to 17.5 mm (standard), extendable via multi-trace stitching |
| Vertical Resolution | 0.001 µm |
| Vertical Range | ±20 µm (standard), ±200 µm (extended range option) |
| Traverse Speed | 0.1–1.0 mm/s (adjustable) |
| Data Storage | Internal flash memory (≥10,000 profiles), USB export support |
| Power | Rechargeable Li-ion battery (≥8 h continuous operation) |
| Brand | Accretech |
|---|---|
| Origin | Japan |
| Model | DM43827 |
| Type | Contact Stylus for Geometric Metrology |
| Application | Roundness, Surface Roughness, and Profile Measurement Systems |
| Compliance | Designed for Integration with Accretech Roundness/Cylindricity Testers (e.g., RA-2200, RA-1200), PGI Profilometers, and Compatible CMM Platforms |
| Mounting Interface | Standard M2.5 × 0.45 mm Threaded Shank |
| Brand | Accretech |
|---|---|
| Origin | Japan |
| Model | DM45505 |
| Type | Contact Profilometer Stylus |
| Operating Principle | Mechanical Stylus Scanning |
| Compliance | Designed for ISO 4287, ISO 11562, and ASME B46.1 surface texture measurement standards |
| Stylus Tip Radius | 2 µm (nominal) |
| Shank Diameter | 3.2 mm |
| Total Length | 25 mm |
| Material | Single-crystal diamond |
| Mounting Interface | Standard M2.5 threaded shank |
| Compatibility | Interchangeable with Accretech SE300/SE350/SP150 series profilometers and compatible third-party CMM-based surface metrology systems |
| Brand | Accretech |
|---|---|
| Origin | Japan |
| Model | DM45505 |
| Type | Contact Stylus Probe for Surface Profilometry and Roughness Measurement |
| Compliance | Designed for ISO 25178, ISO 4287, ASME B46.1, and JIS B 0601-compliant profilometric systems |
| Mounting Interface | Standard 8-32 UNC threaded shank (compatible with Accretech SJ-410/SJ-510/SJ-610 series, Formtracer series, and other OEM profilometers) |
| Tip Geometry | Spherical diamond tip, nominal radius 2 µm or 5 µm (standard variant), 90° included angle conical backup geometry |
| Shank Diameter | 3.0 mm |
| Total Length | 25 mm |
| Maximum Tracking Force | ≤ 1.5 mN (adjustable via instrument feedback loop) |
| Material | High-purity synthetic diamond tip bonded to hardened stainless steel shank |
| Brand | Accretech |
|---|---|
| Origin | Japan |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | EM46000-S302 |
| Price Range | USD 140–7,200 |
| Brand | Accretech |
|---|---|
| Origin | Japan |
| Model | HANDYSURF+ |
| Measurement Principle | Stylus-based contact profilometry |
| Measurement Method | Contact (diamond stylus) |
| Filter Type | 2RC |
| Evaluation Length | 0.2–16 mm |
| Vertical Resolution | 0.0007 µm |
| Maximum Specimen Height Range | −210 to +160 µm |
| Display | 2.4-inch color LCD with Chinese/Japanese/English interface support |
| Compliance | ISO 4287, ISO 4288, ISO 13565-1/2/3, JIS B 0601, ASME B46.1 |
| Brand | Accretech |
|---|---|
| Origin | Japan |
| Model | HANDYSURF+ |
| Measurement Principle | Stylus Profilometry (Contact Mode) |
| Measurement Method | Contact |
| Filter Type | 2RC Gaussian Filter |
| Evaluation Length | 0.2–16 mm |
| Vertical Resolution | 0.0007 µm |
| Measurable Height Range | −210 to +160 µm |
| Display | 2.4″ Color LCD with Full-Character Chinese Support |
| Analysis Modes | Profile Waveform + Parameter Table |
| Standard Analyses | Load Curve, Amplitude Distribution, Peak Count, Motif Analysis |
| Auto Acceptance/Rejection | Configurable Threshold-Based Judgment |
| Compliance | Designed to support ISO 4287, ISO 4288, ISO 13565-1/2/3, ASME B46.1, and JIS B 0601 |
| Brand | Accretech |
|---|---|
| Origin | Japan |
| Model | NEX |
| Measurement Principle | Precision Rotational Axis Metrology with High-Accuracy Spindle & Dual-Position Angular Sampling |
| Positional Accuracy | (0.02 + 3.2H/10,000) µm |
| Compliance | ISO 1101, ISO 12181 (Roundness), ISO 12180 (Cylindricity), ASME Y14.5 |
| Brand | Accretech |
|---|---|
| Origin | Japan |
| Model | NEX Rs |
| Measurement Capabilities | Roundness, Cylindricity, Straightness (axis & surface), Parallelism, Perpendicularity, Coaxiality, Concentricity, Taper, Diameter, Radial Runout (single & total), Linearity of Cylindrical Generatrix, Surface Straightness (face), Face Runout, Flatness, Wall Thickness Variation, Angular Deviation, Small-Arc Radius, Piston Profile Analysis |
| Sensor Mount | Patented Offset-Type Holder (eliminates R-axis interference) |
| Software Platform | ACCTee Integrated Metrology Software (file-centric workflow, Windows-native GUI with icon-driven measurement, analysis, and reporting) |
| Brand | Accretech |
|---|---|
| Origin | Japan |
| Model | NEX Rs |
| Sensor Mount Type | Patented Offset-Type Holder |
| Measurement Mode Switching | Mechanical Flip Mechanism for OD/Top-Surface Transition |
| Software Platform | ACCTee Integrated Metrology Analysis Suite |
| Compliance Framework | Designed for ISO 1101, ISO 12181 (Roundness), ISO 12180 (Cylindricity), and ASME Y14.5 Geometric Dimensioning and Tolerancing (GD&T) workflows |
| Data Management | Native support for audit-trail-enabled measurement file archiving (compatible with GLP/GMP documentation requirements) |
| Brand | Accretech |
|---|---|
| Origin | Japan |
| Model | NEX Rs |
| Measurement Capabilities | Roundness, Cylindricity, Straightness (axis & surface), Parallelism, Perpendicularity, Coaxiality, Concentricity, Taper, Diameter, Radial Runout, Total Radial Runout, Straightness of Cylindrical Generatrix, Flatness of End Face, Face Runout, Wall Thickness Variation, Angular Deviation, Small-Arc Radius, Piston Profile |
| Spindle Accuracy | 0.02 + 3.2H/1000 µm (H = height in mm from base) |
| Bearing Type | Air-bearing Spindle |
| Max. External Diameter | 300 mm |
| Max. Rotational Speed | 20 rpm |
| Sensor Mount | Patented Offset-Type Holder |
| Brand | Accretech (Tokyo Seimitsu) |
|---|---|
| Origin | Japan |
| Model | R73A |
| Bearing Type | Pneumatic (Air) |
| Measurement Principle | Radial Method with Rotating Sensor Table |
| Z-Axis Travel | 1000 mm |
| Radial (R-Axis) Auto-Zero Function | Yes |
| Tilt & Centering | Fully Automatic Compensation |
| Software Platform | ACCTee |
| Measurement Magnification | 50× to 10,000× (8 selectable steps) |
| Compliance | Designed for ISO 1101, ISO 12181 (Roundness), ISO 12180 (Cylindricity), and ASME Y14.5 geometric tolerance evaluation |
| Brand | Accretech |
|---|---|
| Origin | Japan |
| Model | R73A |
| Bearing Type | Air-bearing spindle |
| Measurement Principle | Radius method with rotating sensor table |
| Z-axis Travel | 1000 mm |
| Radial (R-axis) Auto-zero Function | Yes |
| Tilt & Centering | Fully automated mechanical + software-based correction |
| Air-bearing Pressure Monitoring | Integrated diagnostic circuit |
| Magnification Settings | 8-step selectable (50× to 10,000×) |
| Software Platform | ACCTee Measurement Suite |
| Compliance Framework | Designed for ISO 1101, ISO 12181 (Roundness), ISO 12180 (Cylindricity), and ASTM E1155 (Straightness) |
| Brand | ACCRETECH (Tokyo Seimitsu) |
|---|---|
| Origin | Japan |
| Model | R73A |
| Bearing Type | Aerostatic Air Bearing |
| Measurement Principle | Radius Method with Rotating Sensor Spindle |
| Z-Axis Travel | 1000 mm |
| Radial (R-Axis) Auto-Zero Function | Yes |
| Tilt & Centering Compensation | Fully Automated via Software |
| Measurement Magnification | 50× to 10,000× (8-step selectable) |
| Sensor Traverse Mechanism | Integrated Horizontal Probe Translation Unit |
| Z/R-Axis Position Encoders | Built-in Absolute Encoders |
| Air Pressure Monitoring | Real-time Diagnostic Circuit |
| Software Platform | ACCTee Measurement Suite (v6.x or later) |
| Compliance Framework | Designed for ISO 1101, ISO 12181 (Roundness), ISO 12180 (Cylindricity), and ASME Y14.5 geometric tolerance evaluation |
| Brand | Accretech (Tokyo Seimitsu) |
|---|---|
| Origin | Japan |
| Model | RONCOM 31C |
| Rotary Axis (θ) | 6 rpm |
| Z-Axis Travel | 200 mm |
| R-Axis Radial Travel | 125 mm |
| Maximum Workpiece Diameter | Ø250 mm |
| Maximum Height (External) | 520 mm |
| Maximum Height (Internal) | 300 mm |
| Spindle Accuracy (ISO 4291 / JIS B7451) | (0.04 + 6H/10000) µm |
| Straightness (Z-axis) | 0.50 mm / 100 mm |
| Sensor Linear Range | ±400 µm |
| Stylus Tip | Ø1.6 mm sintered carbide sphere |
| Measuring Force | 70 mN |
| Filter Options | Digital 2RC & Gaussian filters |
| Rotational cutoffs | 15–500 undulations/rev |
| Axial cutoffs | 0.025–8 mm |
| Data Analysis | MZC, LSC, MIC, MCC, N.C. evaluation methods |
| Software Platform | ACCTee integrated measurement suite |
| Power Supply | AC 100 V, 50/60 Hz |
| Air Supply | 0.35–0.7 MPa, 30 L/min (NTP) |
| Dimensions (W×D×H) | 1800 × 1000 × 1700 mm |
| Mass | 120 kg |
| Brand | Accretech (Tokyo Seimitsu) |
|---|---|
| Origin | Japan |
| Model | RONCOM 31C |
| Measurement Range (Max. Diameter) | Ø250 mm |
| Z-Axis Vertical Travel | 200 mm |
| R-Axis Radial Travel | 125 mm |
| Spindle Rotational Accuracy | (0.04 + 6H/10000) µm per ISO 4291 / JIS B7451 |
| Minimum Zone Circularity Deviation | (0.02 + 3H/10000) µm |
| Z-Axis Straightness | 0.50 mm / 100 mm |
| Sensor Linear Range | ±400 µm |
| Stylus Tip | Ø1.6 mm sintered carbide sphere |
| Measuring Force | 70 mN |
| Rotation Speed (θ-axis) | 6 rpm |
| Z-Axis Feed Speed (Measuring) | 0.6–5 mm/s |
| Air Supply Requirement | 0.35–0.7 MPa |
| Power Supply | AC 100 V, 50/60 Hz |
| Weight | 120 kg |
| Dimensions (W×D×H) | 1800 × 1000 × 1700 mm (with optional system stand) |
| Brand | Accretech (Tokyo Seimitsu) |
|---|---|
| Origin | Japan |
| Model | RONCOM 41C |
| Rotary Axis (θ-axis) Speed | 6 rpm |
| Z-axis Travel | 200 mm |
| R-axis Radial Travel | 125 mm |
| Maximum Workpiece Diameter | Ø250 mm |
| Maximum Height (External) | 520 mm |
| Maximum Height (Internal) | 300 mm |
| Spindle Accuracy (ISO 4291 / JIS B7451) | (0.04 + 6H/10000) µm |
| Straightness (Z-axis) | 0.50 mm / 100 mm, 15 mm / 300 mm |
| Sensor Linear Range | ±400 µm |
| Stylus Tip | Ø1.6 mm Tungsten Carbide Sphere |
| Measuring Force | 70 mN |
| Filter Options | Digital 2RC & Gaussian |
| Cutoff Frequencies | 15–500 cycles/rev (rotary), 0.025–8 mm (axial) |
| Data Analysis | MZC, LSC, MIC, MCC, N.C. methods |
| Software Platform | ACCTee Integrated Measurement Suite |
| Power Supply | AC 100 V, 50/60 Hz |
| Air Supply | 0.35–0.7 MPa, 30 L/min (NTP) |
| Dimensions (W×D×H) | 1800 × 1000 × 1700 mm |
| Mass | 120 kg |
| Brand | Accretech (Tokyo Seimitsu) |
|---|---|
| Origin | Japan |
| Model | RONCOM 41C |
| Rotary Axis Precision | (0.04 + 6H/10000) µm per ISO 4291/JIS B7451 |
| Z-Axis Travel | 200 mm |
| Maximum Workpiece Diameter | Φ250 mm |
| Maximum Height Measurement | Ø420 mm (OD) / Ø200 mm (ID) |
| Spindle Speed | 6 rpm |
| Z-Axis Measurement Speed | 0.6–5 mm/s |
| Radial (R-Axis) Travel | 125 mm |
| Pneumatic Supply | 0.35–0.7 MPa |
| Brand | Accretech (Tokyo Seimitsu) |
|---|---|
| Origin | Japan |
| Model | RONCOM 43C |
| Maximum Measuring Diameter | Ø250 mm |
| Z-Axis Vertical Travel | 300 mm |
| R-Axis Radial Travel | 125 mm |
| Maximum Workpiece Height (OD/ID) | 520 mm / 300 mm |
| Spindle Accuracy (ISO 4291/JIS B7451) | (0.02 + 6H/10000) µm |
| Minimum Zone Circularity Deviation | (0.01 + 3H/10000) µm |
| Z-Axis Straightness | 0.25 µm/100 mm |
| Sensor Linear Range | ±400 µm |
| Stylus Tip | Ø1.6 mm Sintered Carbide Sphere |
| Measurement Force | 70 mN |
| Rotation Speed (θ-axis) | 6 rpm |
| Z-Axis Feed Speed (Measuring) | 0.6–6 mm/s |
| Air Supply | 0.35–0.7 MPa, 30 L/min (NTP) |
| Power | AC 100 V, 50/60 Hz, 600 VA |
| Dimensions (W×D×H) | 1800 × 1000 × 1700 mm |
| Mass | 130 kg |
| Brand | Accretech (Tokyo Seimitsu) |
|---|---|
| Origin | Japan |
| Model | RONCOM 43C |
| Spindle Accuracy | (0.02 + 6H/10000) µm per ISO 4291/JIS B7451 |
| Max. Workpiece Diameter | Ø250 mm |
| Radial (R-axis) Travel | 125 mm |
| Vertical (Z-axis) Travel | 300 mm |
| Max. Height Measurement | Ø520 mm (OD) / Ø300 mm (ID) |
| Spindle Speed | 6 rpm |
| Z-axis Measurement Speed | 0.6–6 mm/s |
| Sensor Linear Range | ±400 µm |
| Stylus Tip | Ø1.6 mm sintered carbide sphere |
| Measuring Force | 70 mN |
| Filter Options | Digital 2RC & Gaussian, with cutoffs from 15 to 500 undulations/revolution (rotational) and 0.025 to 8 mm (axial) |
| Display | 15″ color LCD |
| Power Supply | AC 100 V, 50/60 Hz |
| Air Supply | 0.35–0.7 MPa, 30 L/min (NTP) |
| Footprint | 1800 × 1000 × 1700 mm (w/d/h) |
| Mass | 130 kg |
| Brand | Accretech (Tokyo Seimitsu) |
|---|---|
| Origin | Japan |
| Model | RONCOM 44DX |
| Bearing Type | Hydrostatic Air Bearing |
| Radial Spindle Accuracy | (0.02 + 4H/10000) µm |
| Mounting Configuration | Offset-Type Chuck |
| Control Mode | Manual (R44), CNC-Enabled (with TIMS Software) |
| Software Platform | TIMS v8.x (Standard & Optional Modules) |
| Footprint Reduction | 25% vs. Prior Generation |
| Brand | Accretech (Tokyo Seimitsu) |
|---|---|
| Origin | Japan |
| Model | RONCOM 44DX |
| Category | Precision Geometric Measurement Instrument for Roundness and Cylindricity |
| Bearing Type | Hydrostatic Air Bearing |
| Rotational Accuracy | (0.02 + 4H/10000) µm |
| Mounting Configuration | Offset-type Chuck with 80 mm Radial Probe Offset |
| Control Mode | Manual (R44), Optional CNC Automation |
| Software Platform | TIMS (Tokyo Seimitsu Integrated Measurement System) |
| Compliance | Designed for ISO 1101, ISO 5436-1, ASME Y14.5, and JIS B 0621 conformance |
| Brand | Accretech (Tokyo Seimitsu) |
|---|---|
| Origin | Japan |
| Model | RONCOM 54 |
| Measurement Range | Max. Diameter Φ300 mm |
| Radial Travel (R-axis) | 170 mm |
| Vertical Travel (Z-axis) | 300 mm (500 mm with high column) |
| Max. Workpiece Diameter | Φ580 mm |
| Max. Height (OD) | 300 mm (500 mm with high column) |
| Spindle Accuracy (Rotational) | (0.02 + 4H/10000) µm per JIS B 7451-1997 (H = height from table to measurement point) |
| Axial Accuracy | (0.02 + 4H/10000) µm per JIS B 7451-1997 (H = distance from rotation center to probe point) |
| Z-axis Straightness | 0.12 µm/100 mm |
| R-axis Straightness | 0.8 µm/150 mm |
| Z-axis Parallelism | 0.8 µm/290 mm (1.18 µm/490 mm with high column) |
| R-axis Parallelism | 1.0 µm/150 mm |
| Radial Indication Accuracy | (2 + L/170) µm (L = measured length) |
| Rotation Speed (θ-axis) | 2–10 rpm (measurement) |
| Z-axis Traverse Speed | 0.5–6 mm/s (max 50 mm/s) |
| R-axis Traverse Speed | 0.5–6 mm/s (max 25 mm/s) |
| Auto-stop Positioning Accuracy | ±5 µm |
| Rotating Table Diameter | Φ220 mm |
| Centering/Tilt Adjustment Range | ±2 mm / ±1° |
| Max. Load Capacity | 30 kg |
| Stylus Force | 30–100 mN (adjustable) |
| Stylus Tip | Φ1.6 mm steel ball, 53 mm length |
| Data Points per Revolution | 14,400 |
| Digital Filter Types | Gaussian, 2RC, Multi-groove |
| Low-pass cutoffs | 15–1500 cycles/rev (rotational), 0.025–8 mm (axial) |
| Band-pass | 15–150, 15–500, 15–1500 cycles/rev (user-definable) |
| Measurement Range | ±1000 µm / ±200 µm |
| Evaluation Methods | MZC (Minimum Zone Circle), LSC (Least Squares Circle), MIC (Maximum Inscribed Circle), MCC (Minimum Circumscribed Circle), N.C. (No Correction), Multi (composite specification) |
| Measurable Parameters | Roundness, Flatness (single/multi-plane), Parallelism, Concentricity, Coaxiality, Cylindricity, Radial Runout, Perpendicularity, Thickness Variation, Total Runout, Radius Measurement, Partial Arc Analysis, Z-axis & R-axis Straightness, Axial Linearity, Cylindrical Surface Deviation |
| Analysis Functions | Auto-centering & auto-tilt correction, Groove profiling (vertical/angular/cursor-based), Combined roundness evaluation modes, Design nominal comparison, 3D cylindrical surface visualization (wireframe, shaded, contour), Real-time profile display, Profile-derived curves (bearing ratio curve, amplitude distribution, power spectral density), Wide-range assessment capability |
| Standard Features | Offset-type chuck holder included |
| Display | 17″ LCD showing measurement conditions, parameters, print settings, 2D/3D profiles, annotations, error logs |
| Output | Color or laser printer (SD card option for data export) |
| Power Supply | AC 220 V, 50–60 Hz ±10%, ~470 VA (excl. printer) |
| Pneumatic Supply | 0.35–0.7 MPa supply pressure |
| Dimensions (W×D×H)/Weight | DX type: 1500×925×1600 mm (1800 mm with column), 500 kg (510 kg) |
| SD type | 2050×900×1700 mm (1900 mm), 194 kg (204 kg) |
| Brand | Accretech (Tokyo Seimitsu) |
|---|---|
| Origin | Japan |
| Model | RONCOM 54 |
| Maximum Measurable Diameter | Ø300 mm |
| Radial Travel (R-axis) | 170 mm |
| Vertical Travel (Z-axis) | 300 mm (500 mm with tall column) |
| Max. Workpiece Diameter | Ø580 mm |
| Max. Measurable Height | 300 mm (500 mm with tall column) |
| Spindle Accuracy (Rotational Axis) | (0.02 + 4H/10000) µm per JIS B 7451-1997 (H = height from table to measurement point) |
| Axial Accuracy | (0.02 + 4H/10000) µm per JIS B 7451-1997 (H = distance from rotation center to probe point) |
| Z-axis Straightness | 0.12 µm/100 mm |
| R-axis Straightness | 0.8 µm/150 mm |
| Z-axis Parallelism | 0.8 µm/290 mm (1.18 µm/490 mm with tall column) |
| R-axis Parallelism | 1.0 µm/150 mm |
| Radial Indication Accuracy | (2 + L/170) µm (L = measurement length in mm) |
| Rotation Speed (θ-axis) | 2–10 rpm during measurement |
| Z-axis Traverse Speed | 0.5–6 mm/s (max 50 mm/s) |
| R-axis Traverse Speed | 0.5–6 mm/s (max 25 mm/s) |
| Auto-Stop Positioning Accuracy | ±5 µm |
| Rotating Table Diameter | Ø220 mm |
| Centering & Tilt Adjustment Range | ±2 mm / ±1° |
| Max. Load Capacity | 30 kg |
| Stylus Force | 30–100 mN (adjustable) |
| Stylus Tip | Ø1.6 mm steel ball, 53 mm length |
| Data Points per Revolution | 14,400 |
| Digital Filter Types | Gaussian, 2RC, Multi-slot |
| Low-pass cutoffs | 15–1000 cycles/rev (rotational), 0.025–8 mm (axial) |
| Band-pass | 15–1500 cycles/rev |
| Measurement Range | ±1000 µm / ±200 µm |
| Evaluation Methods | MZC (Minimum Zone Circle), LSC (Least Squares Circle), MIC (Maximum Inscribed Circle), MCC (Minimum Circumscribed Circle), N.C. (No Correction), Multi (Composite Specification) |
| Measured Parameters | Roundness, Flatness (single/multi-plane), Parallelism, Concentricity, Coaxiality, Cylindricity, Radial Runout, Perpendicularity, Thickness Variation, Total Runout, Radius Measurement, Partial Arc Analysis, Z-axis & R-axis Straightness, Axial Linearity, Cylindrical Surface Deviation |
| Analysis Functions | Auto-centering & auto-tilt correction, Groove Detection (upper/lower limit, angular position, cursor-based), Combined roundness evaluation modes, Design Nominal Value Comparison, 3D Cylindricity Visualization (wireframe, shaded, contour), Real-time profile display, Profile Characterization (bearing ratio curve, amplitude distribution, power spectral density), Wide-range assessment capability, CNC-programmed automated measurement sequence |
| Standard Accessories | Offset-type chuck holder |
| Optional Upgrades | CNC-compatible offset chuck holder |
| Display | 17″ LCD monitor |
| Output | Color printer or laser printer (SD card optional) |
| Power Supply | AC 220 V, 50–60 Hz ±10%, ~470 VA (excl. printer) |
| Pneumatic Supply | 0.35–0.7 MPa supply pressure |
| consumption | 30 NL/min |
| Dimensions (W×D×H)/Weight | DX model: 1500×925×1600 mm (1800 mm with tall column), 500 kg (510 kg) |
| SD model | 2050×900×1700 mm (1900 mm), 194 kg (204 kg) |