Printed Electronics Equipment
Filter
Showing all 9 results
| Brand | A&D |
|---|---|
| Model | AD-8127 |
| Printing Method | Impact Dot-Matrix |
| Character Format | 7×9 dots |
| Character Size | 1.6 mm (W) × 3.2 mm (H) |
| Print Speed | ~1.6 lines/sec |
| Paper Feed Speed | ~4 lines/sec |
| Characters per Line | 24 |
| Operating Temp. | 0–40 °C, 35–85% RH (non-condensing) |
| Storage Temp. | −20–60 °C, 10–90% RH (non-condensing) |
| Interface | RS-232C / Current Loop |
| Power Supply | AC Adapter AX-TB135 or AX-TB285 (Input: AC 100 V ±10% / −15%, 50/60 Hz) |
| Power Consumption | ~36 VA (incl. adapter) |
| Dimensions (W×D×H) | 174 × 141 × 87 mm |
| Weight | ~500 g |
| Standard Accessories | Ribbon cartridge, plain paper roll, AC adapter, identification label, user manual, RS-232C cable (D-Sub9P/D-Sub25P configurable) |
| Brand | AANDD |
|---|---|
| Model | LC4101-G600 |
| Rated Capacity | 6 N (611.8 g) |
| Deflection | 0.24 mm |
| Natural Frequency | 100 Hz |
| Allowable Moment | 0.212 N·m |
| Rated Output | 1.0197 mV/V (+15% / –0%) |
| Zero Balance | ±20% of RO |
| Input Resistance | ~400 Ω |
| Output Resistance | 350 ±5 Ω |
| Insulation Resistance | >500 MΩ @ DC 50 V |
| Temp. Compensation Range | –10 °C to +40 °C |
| Zero Temp. Effect | ±0.04 %RO / 10 °C |
| Output Temp. Effect | ±0.014 %FS / 10 °C (typ.) |
| Recommended Excitation | DC 5–12 V |
| Max. Excitation | DC 15 V |
| Overload Limit (Safe) | 300 %RC |
| Ultimate Overload | 400 %RC |
| Total Error | ±0.015 %RO |
| IP Rating | IP22 |
| Cable | Ø4 mm × 1.5 m (Red: +Exc, White: –Exc, Green: +Sig, Blue: –Sig, Yellow: Shield) |
| Housing Material | Aluminum |
| Dimensions | 300 × 300 mm |
| Mass | 0.12 kg |
| Brand | AND |
|---|---|
| Origin | Japan |
| Model | AD4212A-100 |
| Capacity | 110 g |
| Readability | 0.1 mg |
| Stabilization Time (FAST mode) | ≤1.1 s (0–30 g), ≤1.3 s (30–110 g) |
| Pan Size | 50 × 50 mm |
| Pan Material | SUS316 |
| Interface | RS-232C (bidirectional, 600–19200 bps) |
| Comparator Outputs | 3-level relay contacts with buzzer |
| Input Signals | Tare, Print |
| IP Rating | IP54 |
| Dimensions (W×D×H) | 80 × 250 × 320 mm (measuring unit only) |
| Accessories | Calibration weight, AC adapter, draft shield, instruction manual |
| Brand | AND |
|---|---|
| Model | FX-200i |
| Capacity | 220 g |
| Minimum Readability | 0.001 g |
| Pan Diameter | φ130 mm |
| Repeatability (SD) | ±0.001 g |
| Display Update Rate | 5 / 10 / 20 Hz selectable |
| Power Supply | AC adapter (100 V ±10–15%, 50/60 Hz) |
| Power Consumption | ~11 VA |
| Dimensions (W×D×H) | 193 × 262.5 × 84.5 mm |
| Net Weight | ~2.5 kg |
| Pan Material | SUS304 stainless steel |
| Interface | RS-232C (D-sub 9-pin male) |
| Units | g, %, carat, monme |
| Included Accessories | Draft shield, protective cover, AC adapter |
| Brand | LUSTER |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China-made) |
| Model | CartonHERO-650B |
| Pricing | Available Upon Request |
| Brand | TAMASAKI |
|---|---|
| Origin | Japan |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | JIS-Z2502 |
| Compliance | JIS Z 2502 (2018) for Metal Powder Flowability Testing |
| Power Supply | 100 V AC, 10 VA, 50/60 Hz |
| Timer Accuracy | ±0.005% + 20 ms |
| Timer Display Resolution | 0.01 s |
| Approximate Weight | 4 kg |
| Application Domain | Printed Electronics, Semiconductor Component Fabrication, Additive Manufacturing Feedstock QA |
| Brand | Suruga Seiki |
|---|---|
| Origin | Japan |
| Model | BSS16-70CZ |
| Platform Surface | 70 × 70 mm |
| Travel Range | ±6.5 mm (13 mm total) |
| Load Capacity | 219.5 N (22.4 kgf) |
| Feed Mechanism | Standard Micrometer Head (Pitch = 0.5 mm) |
| Minimum Micrometer Resolution | 10 µm/div |
| Positioning Accuracy | Straightness ≤1 µm, Pitch ≤25″, Yaw ≤15″, Roll Parallelism ≤12 µm |
| Permissible Moment Loads | Pitch/Yaw/Roll = 12.9 / 13.8 / 12.9 N·m |
| Torque Rigidity | Pitch/Yaw/Roll = 0.09 / 0.1 / 0.09 ″/N·cm |
| Permissible Parallelism Tolerance | ≤30 µm |
| Perpendicularity Tolerance | ≤10 µm |
| Mass | 1.16 kg |
| Guide Type | Linear Ball Bearing Rail |
| Construction Material | Stainless Steel with Electroless Nickel Plating |
| Brand | TAMASAKI (Kyoto) |
|---|---|
| Origin | Japan |
| Model | M6×1.0 GP2-DS2 |
| Thread Type | Metric ISO/JIS General Purpose (M), Pitch: 1.0 mm |
| Class | JIS B 1341 Grade 2 (equivalent to ISO 965-3 Class 2H/2G) |
| Nominal Size | M6×1.0 |
| Gage Body Material | Gauge Steel (SUJ2 hardened and stabilized) |
| Sleeve Material | Anodized Aluminum Alloy |
| Mass | 27.7 g |
| Compliance | JIS B 1341, ISO 965-3, ISO 1502 |
| Application Scope | In-process verification of threaded holes in semiconductor packaging substrates, printed electronics interconnect components, and fine-pitch SMT fixture hardware |
| Brand | Vcam |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | ID900/DW800 |
| Application Field | Flexible Printed Circuit (FPC) and Panel Manufacturing |
| Compliance Context | Designed for ISO 9001-certified electronics assembly lines |