Boante IBS-930A Large Modular Intelligent Full-Temperature Shaking Incubator

Overview

The Boante IBS-930A Large Modular Intelligent Full-Temperature Shaking Incubator is engineered for high-throughput, long-duration microbial, cell culture, and biochemical cultivation under precisely controlled thermal and mechanical conditions. It integrates orbital shaking dynamics with multi-zone temperature regulation across three vertically stackable layers—each independently programmable—to support parallel experiments with distinct environmental parameters. The system operates on the principle of forced convection air circulation combined with high-efficiency refrigeration and PID-driven thermal feedback, enabling stable operation across a wide range (4–60 °C) while maintaining ±0.1 °C uniformity at 37 °C—a critical benchmark for mammalian cell culture applications. Its modular architecture eliminates spatial compromise: users deploy only the required number of layers (one, two, or three), optimizing floor space without sacrificing volumetric capacity. Designed for compliance-critical environments, the unit supports GLP/GMP-aligned workflows through audit-ready data logging, password-protected parameter locking, and traceable event history.

Key Features

• Three independent, stackable incubation layers with individual PID temperature control, allowing simultaneous multi-condition experiments.
• Top-opening third layer with reinforced ergonomic handles and lift rod access points—designed to minimize shear stress during vessel loading/unloading and enhance operator safety.
• Mirror-finish stainless steel chamber with R-corner geometry and waterproof base pan—enabling full-chamber rinsing and reducing biofilm adhesion risk per ISO 14644 cleanroom compatibility guidelines.
• OLED touchscreen interface with customizable lock-screen password, supporting both fixed-value operation and advanced multi-stage programming (5 programs × 30 segments each).
• DC motor drive coupled with proprietary thermal-expansion-compensated transmission shafts—delivering consistent torque at low speeds (≤50 rpm) and precise speed stability (±1 rpm) up to 300 rpm without thermal drift.
• Imported compressor-based cooling system using non-ozone-depleting refrigerant, integrated with adaptive timed defrost logic (defrost duration: 1–89 min; interval: 30–600 min) to prevent ice accumulation during extended low-temperature runs.
• Real-time data acquisition at 1-minute intervals, storing up to 90 days of temperature, speed, humidity, illumination, and CO₂ (if equipped) metrics—exportable via USB in CSV format for LIMS integration or statistical analysis.

Sample Compatibility & Compliance

The IBS-930A accommodates standard laboratory vessels including Erlenmeyer flasks (250–2000 mL), test tubes, deep-well plates, and custom bioreactor bags when paired with optional clamping solutions. Its 925 mm × 530 mm oscillating platform supports flexible layout arrangements—eliminating mandatory mass balancing due to its three-axis dynamic stabilization system. All internal surfaces meet USP material safety requirements for pharmaceutical contact zones. The unit complies with IEC 61010-1:2010 for electrical safety and incorporates fail-safe mechanisms aligned with ISO 13485 quality management expectations. UV sterilization cycles and LED illumination are programmable to support photobiological assays and aseptic workflow validation per EU GMP Annex 1 recommendations.

Software & Data Management

The embedded PID microcontroller firmware enables deterministic execution of time-temperature-speed-humidity-CO₂ profiles, with automatic transition between program segments based on elapsed time or sensor-triggered events. Data logging includes timestamped metadata (user ID, program name, alarm flags) and is retained in non-volatile memory—even during power interruption—thanks to integrated backup capacitors. Exported datasets include calibrated sensor values (not raw ADC counts), facilitating direct import into JMP, MATLAB, or Python-based QC dashboards. Audit trail functionality records all parameter modifications, user logins, and alarm acknowledgments—meeting FDA 21 CFR Part 11 electronic record requirements when deployed with validated network authentication protocols.

Applications

• High-density bacterial fermentation (e.g., E. coli, Bacillus subtilis) requiring sustained agitation at 30–37 °C with precise O₂ transfer optimization.
• Mammalian suspension cell expansion (CHO, HEK293) under tightly regulated 37 °C/5% CO₂ conditions with minimal hydrodynamic shear.
• Enzyme kinetics studies involving temperature gradients across stacked layers to assess thermostability profiles.
• Environmental microbiology assays where replicate samples undergo identical thermal-shock protocols across independent chambers.
• Biopharmaceutical upstream process development, including media optimization trials and seed train scaling under GMP-aligned documentation standards.

FAQ

Does the IBS-930A support CO₂ concentration control?
Yes—CO₂ sensing and regulation modules are available as factory-installed options, compatible with infrared NDIR sensors and proportional solenoid valves meeting ISO 8573-1 purity Class 2 specifications.
Can data be exported wirelessly?
No—data export is exclusively via USB 2.0 port; Ethernet or Wi-Fi connectivity is not supported in the base configuration to maintain electromagnetic compatibility in sensitive lab environments.
What maintenance intervals are recommended for the refrigeration system?
Compressor oil and refrigerant charge require inspection every 24 months under continuous operation; condenser coil cleaning is advised quarterly in high-dust environments per ASHRAE Guideline 12-2020.
Is the unit suitable for BSL-2 applications?
When equipped with HEPA-filtered air intake/exhaust and UV sterilization cycles, the IBS-930A may be integrated into BSL-2 workflows—but final containment validation must be performed by the end-user’s biosafety officer per CDC/NIH Biosafety in Microbiological and Biomedical Laboratories (BMBL) 6th Edition.
Are third-party calibration certificates available?
NIST-traceable temperature and speed calibration reports can be provided upon request, issued by an ILAC-MRA accredited metrology laboratory compliant with ISO/IEC 17025:2017.