ISMATEC® REGLO-IPC Standard 24-Channel Peristaltic Pump, 230 VAC, 60 Hz, Adjustable Tube Clamp

Overview

The ISMATEC® REGLO-IPC is a high-precision, 24-channel digital peristaltic pump system engineered for demanding laboratory automation and multi-stream fluid handling applications. Based on the proven planetary gear drive architecture—featuring eight stainless steel rotors—it delivers exceptionally low flow pulsation (<±1.5% CV), enhanced volumetric reproducibility, and extended tubing service life compared to conventional roller-based designs. Unlike single-channel alternatives, the REGLO-IPC integrates synchronized multi-channel control within a compact benchtop footprint, making it ideal for parallel sample processing, reagent dispensing in ELISA or PCR setup, continuous bioreactor feed, and multi-inlet chromatography gradient delivery. Its operation relies on positive displacement via occlusion: rotating rollers compress elastomeric tubing against a rigid housing, generating precise, contamination-free fluid movement without valves or seals contacting the process stream—ensuring full chemical compatibility and eliminating cross-contamination risk.

Key Features

• 24 independently controllable channels with synchronized start/stop and programmable inter-channel timing offsets
• Planetary gear drive with eight hardened stainless steel rotors—reducing mechanical wear, minimizing torque ripple, and improving long-term flow stability
• Tool-free, adjustable tube clamp cartridge system enabling rapid tubing installation, consistent occlusion pressure, and repeatable performance across operators and maintenance cycles
• 5-inch capacitive TFT/RGB touchscreen interface (REGLO-IPC) with wide viewing angle and glove-compatible responsiveness; alternatively, IPC-N variant features a ruggedized 4-digit LED display with 6-key keypad for cleanroom or industrial environments
• Three-tier user access control (Operator / Supervisor / Administrator) supporting password-protected parameter modification, method locking, and audit-ready configuration management
• Support for analog (0–10 V DC) and TTL-level external triggering—enabling seamless integration into PLC-controlled workflows, LIMS-triggered dispensing sequences, or synchronized operation with spectrophotometers or fraction collectors

Sample Compatibility & Compliance

The REGLO-IPC accommodates standard silicone, Viton®, C-Flex®, and PharMed® BPT tubing sizes compatible with Micropump A- and B-series pump heads (ID range: 0.13–6.4 mm). No wetted parts other than the tubing ensure full compatibility with aggressive solvents, biological buffers, and viscous media up to 10,000 cP. The system complies with IEC 61000-6-3 (EMC emission standards) and IEC 61010-1 (safety requirements for laboratory equipment). When configured with MASTERFLEXLIVE® cloud connectivity and enabled audit trail logging, the pump supports GLP/GMP-aligned workflows—including electronic signatures, version-controlled method storage, and FDA 21 CFR Part 11–compliant data integrity protocols for regulated pharmaceutical and clinical diagnostics laboratories.

Software & Data Management

The integrated MASTERFLEXLIVE® platform provides remote monitoring, firmware updates, and method synchronization across distributed instruments via secure HTTPS. All dispense programs—including volume/time targets, ramp profiles, pause intervals, and channel enable/disable states—are saved as encrypted .mfl files with timestamped revision history. Real-time flow rate graphs, cumulative volume logs, and error event reports (e.g., tubing fatigue detection, motor stall, overtemperature) are exportable in CSV or PDF format. For enterprise deployment, RESTful API endpoints allow direct integration with LabVantage, Thermo Fisher SampleManager, or custom MES systems—supporting automated batch record generation and electronic batch signature capture.

Applications

• High-throughput assay setup: Parallel dispensing of antibodies, substrates, or cell suspensions into 96-/384-well microplates with ±0.5% volumetric accuracy (tested per ISO 8655-7)
• Fermentation and bioreactor feeding: Precise, pulseless nutrient or pH-adjustment reagent delivery across multiple vessels under cascade control
• Automated sample preparation: Coupled with autosamplers for sequential dilution series, solid-phase extraction elution, or LC mobile phase blending
• Environmental water analysis: Multi-analyte calibration standard delivery in EPA Method 525.3 and 625.1 workflows
• Food & beverage QC: Consistent flavoring, preservative, or colorant dosing during pilot-scale formulation trials

FAQ

What tubing sizes are supported on the REGLO-IPC?
The system supports Micropump A- and B-series pump heads, accommodating tubing inner diameters from 0.13 mm to 6.4 mm—including common sizes such as 0.5 mm, 1.6 mm, and 3.2 mm ID.
Can I integrate this pump into an existing SCADA system?
Yes—via 0–10 V analog input/output and TTL-compatible digital I/O, the REGLO-IPC accepts external start/stop commands, speed modulation signals, and status feedback for real-time PLC coordination.
Is tubing life tracking available?
While no embedded sensor measures tubing wear directly, MASTERFLEXLIVE® logs cumulative run time per channel and allows manual entry of tubing replacement events—enabling predictive maintenance scheduling based on manufacturer-recommended service intervals.
Does the pump meet ISO/IEC 17025 requirements for accredited testing labs?
When operated with calibrated tubing and validated methods, the REGLO-IPC supports traceable volumetric dispensing; its digital audit trail, user access controls, and electronic records align with ISO/IEC 17025:2017 Clause 7.7 on result reporting and data integrity.
How is flow calibration performed?
Calibration is conducted gravimetrically using certified balances per ISO 8655-7: users define target volumes, select tubing/pump head combinations, and perform multi-point verification across the operational flow range—results are stored as channel-specific calibration curves within the instrument firmware.