PMM 9010 Portable EMI Receiver
| Brand | PMM |
|---|---|
| Origin | Italy |
| Model | 9010 |
| Frequency Range | 10 Hz – 30 MHz (expandable to 2.7 GHz) |
| RF Input | 50 Ω, BNC female |
| Attenuator | 0–35 dB (5 dB steps) |
| Preamp Gain | 10 dB / 20 dB (post-preselector) |
| Max Input (non-destructive) | 137 dBµV (1 W sine), 97 dBµV/MHz (pulse spectral density) |
| Preselector | 7 filters (<9 kHz, 9–150 kHz, 150 kHz–500 kHz, 500 kHz–3 MHz, 3–10 MHz, 10–20 MHz, 20–30 MHz) |
| IF Bandwidths (6 dB) | 10 Hz, 100 Hz, 1 kHz, 10 kHz |
| Detector Modes | Peak, Quasi-Peak, RMS, Average (parallel) |
| Measurement Time | 1 ms – 30 s |
| Display Units | W, V, A, dBm, dBµV, dBµA, dBpW, dBµV/m, dBµA/m |
| Span/Division | 1–100 kHz |
| IF Resolution | 0.1–10 kHz |
| Amplitude Accuracy (S/N > 20 dB) | ±1.0 dB (1–150 kHz), ±0.8 dB (150 kHz–30 MHz) |
| Tracking Generator | 10 Hz–50 MHz, output 60–90 dBµV (0.1 dB steps), accuracy ±0.3 dB (9 kHz–30 MHz) |
| Demodulation | AM/FM |
| Interfaces | RS-232, USB, IEEE-488 (optional), wireless (optional) |
| Operating Temperature | 0–40 °C |
| Power | 12 V DC |
| Dimensions | 235 × 105 × 330 mm |
| Weight | 5 kg |
Overview
The PMM 9010 Portable EMI Receiver is a fully compliant, field-deployable measurement instrument engineered for electromagnetic compatibility (EMC) pre-compliance and diagnostic testing in accordance with CISPR 16-1-1:2019 and related international standards. It operates on the principle of selective amplitude detection across defined intermediate frequency (IF) bandwidths and detector weighting functions—specifically optimized for radiated and conducted emission measurements in the 10 Hz to 30 MHz range. Its architecture integrates a high-stability local oscillator, digitally controlled preselection filtering, and parallel real-time detectors to ensure traceable, repeatable results under variable ambient conditions. Designed for laboratory, production line, and on-site troubleshooting environments, the 9010 delivers metrological-grade performance without requiring external calibration infrastructure or AC mains dependency—making it suitable for GLP-aligned engineering labs, automotive EMC validation teams, and regulatory test houses performing preliminary conformity assessments.
Key Features
- Integrated rechargeable battery system enabling full operation for >4 hours; total mass of 5 kg ensures single-operator portability
- High-resolution color LCD display with intuitive menu navigation and real-time spectral visualization
- Four simultaneous real-time detectors: Peak, Quasi-Peak (QP), RMS, and Average—each independently configurable per CISPR 16-1-1 requirements
- Seven-step mechanical and electronic preselector bank covering discrete bands from <9 kHz up to 30 MHz, minimizing out-of-band interference and improving dynamic range
- Digital CISPR weighting implementation with certified time constants (e.g., 160 ms for QP at 150 kHz–30 MHz), eliminating analog circuit drift
- Built-in tracking generator (10 Hz–50 MHz) supporting impedance-matched swept-frequency analysis for cable loss, antenna factor verification, and filter characterization
- Dual-mode AM/FM demodulator for qualitative signal identification and modulation analysis during troubleshooting
- Multi-interface connectivity including RS-232, USB 2.0 (CDC class), IEEE-488 (GPIB, optional), and Wi-Fi (optional) for remote control and automated test sequencing
- Click measurement function per CISPR 16-1-1 Annex D, enabling statistical assessment of impulsive disturbance repetition rates
- Maximum safe input handling: 137 dBµV (1 W) continuous sine, 97 dBµV/MHz pulse spectral density—validated per IEC 61000-4-3 immunity margin considerations
Sample Compatibility & Compliance
The PMM 9010 is compatible with standard 50 Ω RF measurement configurations, including LISNs (Line Impedance Stabilization Networks), current probes, voltage probes, and calibrated antennas (e.g., biconical, loop, rod) used in conducted and radiated emission testing. Its front-end design meets CISPR 16-1-1 clause 4.2.2 for impedance stability and spurious response suppression. All amplitude accuracy specifications are verified under ISO/IEC 17025-accredited conditions and documented in the factory calibration certificate (traceable to INRIM, Italy). The instrument supports full compliance with EN 55032, EN 55022, FCC Part 15 Subpart B, and MIL-STD-461G CE102/RE102 test procedures when paired with appropriate accessories and validated test setups. Optional 2.7 GHz extension module (PMM 9010-EXT) enables coverage up to 2.7 GHz using external harmonic mixers and preamplifiers—fully maintaining CISPR detector behavior and bandwidth definitions per Annex A of CISPR 16-1-1.
Software & Data Management
The 9010 operates natively with PMM’s EMITEST Suite v5.x, a Windows-based application supporting automated test plan execution, limit line overlay (CISPR, FCC, MIL-STD), margin reporting, and export to CSV, XML, and PDF formats. All measurement data includes embedded metadata: timestamp, detector mode, IF bandwidth, preselector state, attenuation setting, and GPS coordinates (when enabled via optional Bluetooth GNSS module). Audit trails comply with FDA 21 CFR Part 11 requirements through user authentication, electronic signatures, and immutable result logging. Firmware updates are delivered via signed USB firmware packages with SHA-256 checksum verification. Remote operation via SCPI commands over USB or TCP/IP allows integration into CI/CD test automation pipelines and enterprise LIMS systems.
Applications
- Pre-compliance screening of consumer electronics, industrial controls, and medical devices prior to formal EMC chamber testing
- On-site troubleshooting of switching power supply noise, motor drive harmonics, and digital clock leakage in R&D labs and manufacturing facilities
- Verification of LISN insertion loss, antenna calibration factors, and shield effectiveness in situ
- Field assessment of electromagnetic environment (EME) for telecom base station co-location studies
- Education and training in EMC fundamentals—demonstrating detector behavior, bandwidth effects, and preselection impact on measurement uncertainty
- Supporting ISO 11452-2/4/8 component-level immunity test setups through synchronized stimulus-response analysis
FAQ
Is the PMM 9010 suitable for official CISPR-compliant certification testing?
Yes—when operated within its specified environmental conditions (0–40 °C, non-condensing), with valid factory calibration (recommended annually), and used with traceable accessories (e.g., CISPR-compliant LISNs and antennas), the 9010 satisfies the instrumentation requirements of CISPR 16-1-1 for Class A receivers and may be employed in accredited test reports.
Can the 9010 perform radiated emissions measurements directly?
No—it is a receiver only. Radiated measurements require connection to a calibrated receiving antenna and appropriate amplification stages; the 9010 provides the detection, weighting, and data acquisition subsystem.
What is the uncertainty contribution of the built-in tracking generator?
The tracking generator exhibits ±0.3 dB amplitude uncertainty over 9 kHz–30 MHz (per calibration certificate), with phase stability <1° over 100 ms sweeps—sufficient for cable and filter characterization but not for vector network analysis.
Does the instrument support automatic limit line compliance checking?
Yes—EMITEST Suite enables real-time pass/fail evaluation against user-defined or standard-compliant limits, with visual indicators and exportable compliance statements.
Is firmware upgrade free after purchase?
Yes—PMM provides lifetime firmware updates at no additional cost via registered customer portal access, including security patches and minor feature enhancements.
