SafQ SnapRite G201M Automatic Button Pull Tester
| Brand | SDLATLAS |
|---|---|
| Origin | Shenzhen, China |
| Manufacturer Type | Manufacturer |
| Regional Category | Domestic (China) |
| Model | G201M |
| Pricing | Upon Request |
Overview
The SafQ SnapRite G201M Automatic Button Pull Tester is an electromechanical tensile testing instrument engineered for standardized evaluation of mechanical retention strength and failure behavior of garment fasteners. It operates on a controlled-force, constant-rate-of-traverse principle compliant with key textile safety standards—including ASTM F963–23 (Section 4.5.1.1), ISO 13997:2019 (for sharp edge assessment post-detachment), and EN 14682:2014+A1:2018 (Children’s Clothing — Cords and Drawstrings). The system applies axial tensile load perpendicular to the fabric plane via programmable actuation, enabling precise quantification of pull-off force (in newtons) required to dislodge or fracture buttons, snaps, rivets, and other apparel attachments. Its closed-loop load control architecture—integrating high-stability load cells (±0.5% full-scale accuracy), servo-driven linear motion, and real-time digital feedback—ensures repeatable test execution independent of operator intervention, thereby eliminating subjective variability inherent in manual pull testers.
Key Features
- Automated, single-cycle tensile actuation with pre-programmable load rate (0.1–50 N/s), dwell time (0.1–99.9 s), and maximum force threshold (up to 200 N)
- Dual-clamp modular fixture system: concave five-jaw button grip (Linge12–16), convex top jaw, and fabric anvil clamp with adjustable clamping pressure (1–10 bar)
- Integrated 0.1 N resolution load cell and 0.01 s time-resolution digital display with USB data export capability
- Compliance-ready test sequence logging: timestamped force–time curves, peak load capture, and pass/fail flagging per user-defined acceptance criteria
- Modular accessory compatibility for extended scope: fixtures for jeans buttons, four-hole flat buttons, zippers, bow ties, eyelets, hook-and-bar closures, D-rings, and decorative appliqués
Sample Compatibility & Compliance
The SnapRite G201M accommodates garments and textile assemblies ranging from lightweight woven blouses to heavy-duty denim jackets, with fabric thickness up to 12 mm and button diameters from 6 mm to 35 mm. All test configurations adhere to statutory safety protocols governing children’s wear: detached components are classified as small parts per ASTM F963 Annex A5 and require subsequent assessment using complementary instrumentation—specifically the SafQ Small Parts Cylinder (G201A9-10), SafQ Sharp Point Tester (G201A1-3), and SafQ Sharp Edge Tester (G201A4-6). Optional impact validation—performed with the SafQ Button Impact Strength Tester (M289)—may be integrated into full-scope safety qualification workflows aligned with CPSIA Section 101 and EU REACH Annex XVII requirements.
Software & Data Management
The device operates standalone with embedded firmware supporting GLP-compliant audit trails: each test record includes operator ID, sample ID, date/time stamp, calibration status, fixture ID, and raw force–time waveform data stored in CSV format. Optional PC-based software (SafQ TestSuite v3.2) enables advanced analysis—including statistical process control (SPC) charting, batch report generation, and automated comparison against ISO 13997 or ASTM D5034 thresholds. Data integrity meets FDA 21 CFR Part 11 requirements for electronic records when paired with user access controls, digital signatures, and immutable audit logs.
Applications
- Pre-production validation of button attachment integrity across knit, woven, and nonwoven substrates
- Quality assurance testing in final inspection for OEM apparel manufacturers and contract sewing facilities
- Regulatory conformance verification for importers targeting North American, European, and ASEAN markets
- Root-cause analysis of seam failure modes during R&D of high-stress garment zones (e.g., waistbands, cuffs, collar stands)
- Supplier qualification audits requiring documented repeatability (CV ≤ 3.5%) and inter-laboratory reproducibility per ISO/IEC 17025:2017 Clause 7.7
FAQ
What safety standards does the SnapRite G201M directly support?
It is configured to execute test sequences aligned with ASTM F963–23, EN 14682:2014+A1:2018, and ISO 13997:2019, with traceable calibration to NIST-traceable force standards.
Can the system test non-button fasteners such as zippers or D-rings?
Yes—modular fixtures enable validated testing of zippers (pull-tab retention), D-rings (loop strength), hook-and-bar systems, and decorative hardware per ASTM D2268 and ISO 12947-2 protocols.
Is third-party certification available for this instrument?
SDLATLAS provides ISO/IEC 17025-accredited calibration certificates (traceable to CNAS) and optional factory witness testing for IQ/OQ documentation packages.
How is detachment debris handled after a test cycle?
Detached components are automatically retained within the test chamber’s containment tray; users must manually transfer specimens to the SafQ Small Parts Cylinder (G201A9-10) for choke-hazard screening per CPSC 16 CFR §1501.4.
Does the G201M support multi-step test protocols (e.g., pull + impact)?
No—the G201M performs static tensile pull only; sequential impact testing requires integration with the standalone SafQ Button Impact Strength Tester (M289), with synchronized reporting via SafQ TestSuite.
