Pumps
Filter
Showing 271–300 of 344 results
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | ME 2C |
| Pricing | Upon Request |
| Maximum Flow Rate | 1.9 m³/h |
| Ultimate Vacuum (Absolute) | 80 mbar |
| Dimensions (L×W×H) | 258 × 164 × 191 mm |
| Weight | 7.1 kg |
| Order Code | 696121 |
| Brand | Nippon Scientific |
|---|---|
| Origin | Japan |
| Model | SP-D-2502 |
| Flow Rate Range | 0.15–1.5 mL/min (50 Hz) / 0.18–1.8 mL/min (60 Hz) |
| Max Delivery Pressure | 10 MPa |
| Wetted Materials | SUS316, Sapphire, Ruby, Ceramics, PTFE |
| Dimensions | 250 × 190 × 126 mm (W×D×H) |
| Weight | 3.5 kg |
| Power Supply | AC 100 V, 50/60 Hz |
| Brand | TAMASAKI |
|---|---|
| Origin | Japan |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | DPC-201N12 |
| Drive Method | Manual |
| Measurement Range | ±200.0 Pa |
| Display Resolution | 0.1 Pa |
| Accuracy | ±0.1% FS ±1 digit |
| Temperature Drift | ±0.12% FS/°C |
| Display Update Interval | 0.1 s |
| Analog Output | 1–5 V (fully scalable) |
| Warm-up Time | 10 min |
| Sensor Type | Silicon Diaphragm |
| Compatible Media | Non-corrosive and mildly corrosive gases |
| Overpressure Limit | 10 kPa |
| Static Pressure Range | 30 kPa |
| Operating Ambient Temperature | 0–45°C (40°C max with AC adapter) |
| Dimensions | 96 × 96 × 141 mm (W × H × D) |
| Weight | 0.9 kg (excl. AC adapter) |
| Pressure Port | Φ8 mm hose barb (convertible to PT1/4 internal thread) |
| Power Supply | DC 12 V ±10% via included AC adapter (AC 100 V input, 10 W consumption) |
| Standard Functions | Hi/Go/Lo contact outputs (AC 250 V, 2 A), contact hysteresis setting (0–20 digits), moving average time setting (0–20 s), analog output scaling, zero-hold external signal input (dry contact) |
| Brand | Otisense |
|---|---|
| Origin | Tianjin, China |
| Model | AP-01P |
| Pump Type | Diaphragm (Oil-Free) |
| Ultimate Vacuum | ≥80 kPa (≈23.6 inHg / −20 psi gauge) |
| Maximum Pressure | Not specified |
| Flow Rate | 10 L/min |
| Motor Power | 35 W |
| Dimensions (W×H×D) | 246 × 190 × 135 mm |
| Weight | 3.1 kg |
| Power Supply | AC 220 V, 50 Hz |
| Housing Materials | Polyphenylene Sulfide (PPS) and Polytetrafluoroethylene (PTFE) |
| Compliance | CE-marked per IEC 61000-6-3 (EMC) and IEC 61000-6-2 (Immunity) |
| Brand | Otisience |
|---|---|
| Origin | Tianjin, China |
| Model | AP-01D |
| Pump Type | Diaphragm-Type Oil-Free Vacuum/Pressure Pump |
| Ultimate Vacuum | 80 kPa (≈20 psi vacuum) |
| Max Pressure Output | Not Specified |
| Flow Rate | 10 L/min |
| Motor Power | 35 W |
| Dimensions (W×H×D) | 246 × 190 × 135 mm |
| Weight | 3.2 kg |
| Power Supply | AC 220 V / 50 Hz |
| Construction Materials | PPS (Polyphenylene Sulfide) & PTFE (Polytetrafluoroethylene) |
| Compliance | CE-marked design principles |
| Brand | Otisience |
|---|---|
| Model | AP-02B |
| Type | Diaphragm-Based Oil-Free Dual-Head Vacuum/Pressure Pump |
| Vacuum Range | 0–80 kPa (adjustable) |
| Maximum Pressure Output | >150 kPa |
| Flow Rate | 10,000 mL/min |
| Power Consumption | 45 VA |
| Input Voltage | AC 220 V / 50 Hz |
| Dimensions (W×H×D) | 230 × 85 × 200 mm |
| Weight | 2.5 kg |
| Compliance | CE-marked design for laboratory use under IEC 61010-1 |
| Brand | Otisience |
|---|---|
| Model | AP-9100A |
| Pump Type | Oil-Free Diaphragm Pump |
| Vacuum Range | 0–95 kPa (gauge), Max Absolute Vacuum >500 kPa (i.e., <50 kPa abs) |
| Pressure Output | Up to 95 kPa (gauge) |
| Flow Rate | 80 L/min |
| Motor Power | 250 W |
| Dimensions (W×H×D) | 270 × 180 × 246 mm |
| Weight | 11.2 kg |
| Power Supply | 220 V / 50 Hz |
| Construction | PPS (Polyphenylene Sulfide) and Anodized Aluminum Housing |
| Compliance | CE-marked, RoHS-compliant, Designed for GLP-Compatible Lab Environments |
| Brand | Otisience |
|---|---|
| Origin | Tianjin, China |
| Model | AP-9925(N) |
| Type | Diaphragm-Type Oil-Free Vacuum Pump |
| Ultimate Vacuum | <15 kPa (abs) |
| Pumping Speed | 25 L/min |
| Motor Power | 50 W |
| Dimensions (W×D×H) | 230 × 130 × 160 mm |
| Weight | 3.1 kg |
| Voltage/Frequency | 220 V / 50 Hz |
| Pressure Regulation | Manual Knob-Controlled Dual-Port (Vacuum & Positive Pressure) |
| Diaphragm & Cylinder Surface | PTFE-Coated |
| Compliance | CE-marked per EN 61000-6-3 & EN 61000-6-2 (EMC), RoHS 2015/863/EU |
| Brand | Otisience |
|---|---|
| Model | AP-9950 |
| Type | Oil-Free Dual-Head Vacuum Pump |
| Ultimate Vacuum | >85 kPa (gauge, adjustable) |
| Max Positive Pressure | >500 kPa (gauge) |
| Pumping Speed | 40 L/min |
| Power | 60 W |
| Dimensions (W×D×H) | 230 × 145 × 160 mm |
| Weight | 3.8 kg |
| Input Voltage | 220 V / 50 Hz |
| Configuration | Dual-head (parallel/series switchable) |
| Control | Manual pressure regulation knob |
| Compliance | CE-marked design principles, RoHS-compliant materials |
| Brand | Pfeiffer Vacuum |
|---|---|
| Origin | France |
| Model | ACP 120 |
| Pump Type | Oil-Free Dry Scroll Vacuum Pump |
| Ultimate Pressure | ≤3 × 10⁻² mbar |
| Pumping Speed | 95 m³/h |
| Motor Power | 3 kW |
| Noise Level | <65 dB(A) |
| Weight | 205 kg |
| Inlet Flange | DN 50 |
| External Dimensions (L×W×H) | 1000 × 600 × 700 mm |
| Maintenance Interval | ~17,000 operating hours |
| Compliance | CE, RoHS, ISO 9001-certified manufacturing |
| Brand | Pfeiffer Vacuum |
|---|---|
| Origin | Germany |
| Model | HiCube 80 Eco |
| Pump Type | Oil-Free Turbo-Molecular Pump System |
| Ultimate Pressure | <1×10⁻⁸ Pa (without gas ballast) |
| Pumping Speed (N₂) | 67 L/s at DN 63 CF-F inlet |
| Pre-vacuum Pump | MVP 015-2 multi-stage diaphragm pump |
| Forepump Speed | 1 m³/h (16.67 L/min, N₂) |
| Ultimate Forepressure | <1×10⁻² Pa |
| Cooling | Convection-cooled (standard) |
| Power Supply | 100–240 V AC, 50/60 Hz |
| Max. Power Consumption | 170 W |
| Sound Pressure Level | ≤50 dB(A) |
| Inlet Flange | DN 63 CF-F |
| Outlet Flange | G 1/8" |
| Dimensions (W×D×H) | 352 × 301 × 302 mm |
| Weight | 13.5 kg |
| Compliance | CE, RoHS, ISO 9001 certified |
| Control Interface | Integrated digital controller with status LEDs and RS-232/USB option |
| Brand | Pfeiffer Vacuum |
|---|---|
| Origin | Germany |
| Model | HiPace 300 |
| Nominal Pumping Speed for N₂ | 260 L/s |
| Protection Rating | IP54 |
| Certifications | UL/CSA, CE, compliant with EN 61000-6-2/-4 and EN 61000-3-2 |
| Integrated Drive Electronics | TC 400 |
| Cooling | Integrated water-cooling system |
| Mounting | Flange-compatible (DN 100 CF/KF optional) |
| Application Class | High and ultra-high vacuum (UHV) systems |
| Brand | Pfeiffer Vacuum |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | HiPace 80 Neo |
| Instrument Type | Turbomolecular Pump |
| Product Type | Oil-Free Pump |
| Pumping Speed (N₂) | 67 L/s |
| Ultimate Pressure | ≤2.2 × 10⁻⁸ mbar (typical in high vacuum, corrected from erroneous “22 mbar” — consistent with HiPace 80 Neo datasheet) |
| External Dimensions (W × H × D) | 97 × 86 × 129 mm |
| Weight | 1.7 kg |
| Motor Power Supply | 110 V AC, 50/60 Hz (integrated drive electronics) |
| Brand | Pfeiffer Vacuum |
|---|---|
| Origin | Germany |
| Model | MVP015-2 |
| Power Supply | 24 V DC |
| Noise Level | <50 dB(A) |
| Operating Temperature Range | 5–40 °C |
| Pumping Speed (at 100 mbar) | 1.5 m³/h |
| Ultimate Vacuum (with gas ballast open) | ≤10 mbar |
| Ultimate Vacuum (with gas ballast closed) | ≤3 mbar |
| Motor Type | Electronically Commutated DC Motor (ECM) |
| Stages | Two-stage |
| Gas Ballast | Magnetic Solenoid Valve |
| Maintenance Interval | Up to 2 years under typical lab conditions |
| Weight | ~6.2 kg |
| Brand | Sanotac |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | TS0530 |
| Flow Rate | 0.01–50.00 mL/min |
| Pressure Rating | ≤30 MPa |
| Temperature Control Range | Ambient to 100 °C |
| Temperature Accuracy | ±1 °C |
| Flow Accuracy | ±0.5% |
| Flow Precision (RSD) | ≤0.1% |
| Pressure Pulsation | ≤0.2 MPa |
| Wetted Materials | 316L stainless steel, ruby, PTFE, PEEK, ceramic |
| Communication | RS232/RS485, Modbus RTU, digital I/O |
| Display | 256×64 dot matrix backlit LCD |
| Power Supply | 85–264 VAC, 50 Hz |
| Brand | ShoLyn |
|---|---|
| Origin | Shanghai, China |
| Model | LynVac-40 |
| Pump Type | Oil-Free Diaphragm Vacuum Pump |
| Ultimate Vacuum | 8–10 mbar |
| Max Flow Rate | 40 L/min |
| Motor Power | 240 W |
| Dimensions (L×W×H) | 320 × 170 × 210 mm |
| Weight | 11 kg |
| Noise Level | < 55 dB(A) |
| Operating Temperature | 5–40 °C |
| Relative Humidity | < 80 % RH |
| Pump Head Material | PTFE |
| Diaphragm Material | HNBR + PTFE Composite |
| Valve Material | FKM / FFPM |
| Inlet/Outlet Port | 10 mm |
| Rated Voltage/Frequency | 220 V / 50 Hz |
| Speed | 1450 RPM |
| Equipped With | Vacuum Regulating Valve, Solid Discharge Valve, Thermal Cut-Off Switch |
| Brand | Signal |
|---|---|
| Origin | Hebei, China |
| Model | iPump2L / iPump4L / iPump6L |
| Flow Rate Range | 0.0006–2416 mL/min |
| Speed Range | 0.01–600 RPM |
| Accuracy | ±0.5% |
| Display | 128×32 Graphic LCD |
| Control Interface | Rotary Encoder + Membrane Keypad |
| External Control Options | 0–5 V, 0–10 V, 4–20 mA, 0–10 kHz (optical isolation) |
| Communication | RS485 with Modbus RTU protocol (optional) |
| Protection Rating | IP31 |
| Power Supply | AC 90–260 V, 50/60 Hz |
| Operating Environment | 0–40 °C, <80% RH non-condensing |
| Dimensions (L×W×H) | 291 × 208 × 180 mm (driver only) |
| Weight | 3.8 kg (iPump2L), 50 W max |
| Brand | Signal |
|---|---|
| Origin | Hebei, China |
| Model | iPump2S-D |
| Flow Rate Range | 0.006–1970 mL/min |
| Speed Range | 0.1–200 rpm |
| Speed Resolution | 0.1 rpm (＜100 rpm), 1 rpm (≥100 rpm) |
| Display | 3-digit LED for speed and timer |
| Direction Control | Bidirectional |
| Timing Function | 0.1 s–99 h |
| External Control Options | 0–5 V, 0–10 V, 4–20 mA, 0–10 kHz (optical isolation) |
| Communication | RS485 with Modbus RTU protocol (optional) |
| Protection Rating | IP31 |
| Power Supply | AC 90–260 V, 50/60 Hz |
| Power Consumption | <50 W |
| Operating Environment | 0–40 °C, ≤80% RH non-condensing |
| Dimensions (L×W×H) | 224 × 147 × 227 mm (excl. pump head) |
| Weight | 3.8 kg |
| Enclosure Material | 304 stainless steel |
| PCB | Conformal coated (triple protection against moisture, corrosion, and dust) |
| Brand | Signal |
|---|---|
| Origin | Hebei, China |
| Model | iPump4S / iPump6S |
| Flow Rate Range | 0.008–2416 mL/min |
| Speed Range | 0.1–200 RPM (iPump4S), 0.1–600 RPM (iPump6S) |
| Speed Resolution | 0.1 RPM (<100 RPM), 1 RPM (≥100 RPM) |
| Power Consumption | 50 W (iPump4S), 75 W (iPump6S) |
| Input Voltage | AC 90–260 V, 50/60 Hz |
| Operating Environment | 0–40 °C, <80% RH non-condensing |
| Dimensions (L×W×H) | 291 × 208 × 180 mm (excl. pump head) |
| Weight | 3.6 kg |
| IP Rating | IP31 |
| External Control Options | 0–5 V, 0–10 V, 4–20 mA, 0–10 kHz (optical isolation) |
| Communication | RS485 with Modbus RTU protocol (optional module) |
| Footswitch Support | Yes (optional) |
| Display | 3-digit LED, showing speed and timer |
| Direction Control | Bidirectional |
| Timer Range | 0.1 s – 99 h |
| Memory Function | Power-loss retention of operational state |
| Brand | Signal |
|---|---|
| Origin | Hebei, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | iPump6S-G + YZ35B |
| Pump Type | Peristaltic Pump |
| Flow Rate Range | 0.46–12 L/min |
| Speed Range | 40–600 RPM |
| Resolution | 1 RPM |
| Power Consumption | <300 W |
| Input Voltage | AC 180–260 V, 50 Hz |
| Operating Environment | 0–40 °C, RH <80% non-condensing |
| Enclosure Rating | IP31 |
| Dimensions (L×W×H) | 370 × 235 × 240 mm (excluding pump head) |
| Weight | 11.5 kg |
| Housing Material | 304 Stainless Steel |
| PCB Protection | Triple-Conformal Coated |
| Control Modes | Speed, Flow, Timer |
| Direction | Reversible |
| Timer Range | 1 s – 99 h |
| External Control Options | 0–5 V, 0–10 V, 4–20 mA, 0–10 kHz (optical isolation) |
| Communication | RS485 Modbus RTU (optional module) |
| Footswitch Support | Optional |
| Full-Speed Fill/Empty Function | Yes |
| Power-Fail Memory | Yes |
| Display | 4-digit LED (speed or flow, toggleable) |
| Brand | SSI |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | SSI BLS CLASS |
| Flow Rate | 0.000–10.00 mL/min (up to 6,000 psi) |
| Maximum Pressure | 6,000 psi (5,000 psi with PEEK fluidic path) |
| Pulsation | ≤2% (at 1 mL/min, 1,000 psi, with pulse dampener) |
| Flow Accuracy | ±2% of full scale |
| Flow Precision | ≤0.2% RSD |
| Fluid Path Materials | Stainless steel, PEEK, optional titanium |
| Dimensions | 22.9 × 25.4 × 43.2 cm (H×W×D) |
| Weight | 13.6 kg |
| Power Supply | 100–240 VAC (±10%), 50–60 Hz |
| Control Interfaces | RS-232, Micro-USB, Analog (0–10 V / 4–20 mA), Run/Stop TTL |
| Brand | SSI |
|---|---|
| Origin | Imported |
| Model | BLS CLASS |
| Flow Rate | 0.000–10.00 mL/min (up to 6,000 psi) |
| Pressure Rating | 6,000 psi (stainless steel/PEEK fluid path), 5,000 psi (PEEK-only configuration) |
| Pulsation | ≤2% at 1 mL/min and 1,000 psi (with pulse dampener) |
| Flow Accuracy | <±2% of full scale (≥0.20 mL/min, 20% IPA/water, 1,000 psi) |
| Flow Precision | ≤0.2% RSD |
| Fluid Path Materials | Stainless steel, PEEK, optional titanium |
| Dimensions | 22.9 cm H × 25.4 cm W × 43.2 cm D |
| Weight | 13.6 kg |
| Power Input | 100–240 VAC ±10%, 50–60 Hz |
| Control Interfaces | RS-232, Micro-USB, analog (0–10 V / 4–20 mA), discrete Run/Stop |
| Brand | SSI |
|---|---|
| Origin | Imported |
| Model | BLS Class |
| Flow Rate | 0.000–10.00 mL/min (up to 6,000 psi) |
| Maximum Pressure | 6,000 psi (5,000 psi with PEEK fluidic path) |
| Pulsation | ≤2% at 1 mL/min & 1,000 psi (with pulse dampener) |
| Flow Accuracy | ±2% of full scale |
| Flow Precision | ≤0.2% RSD |
| Fluid Path Materials | Stainless steel, PEEK, optional titanium |
| Dimensions | 22.9 × 25.4 × 43.2 cm (H × W × D) |
| Weight | 13.6 kg |
| Power | 100–240 VAC ±10%, 50–60 Hz |
| Control Interfaces | RS-232, Micro-USB, analog (0–10 V / 4–20 mA), discrete Run/Stop |
| Brand | SSI |
|---|---|
| Origin | Imported |
| Model | BLS010SFT1A |
| Flow Rate | 0.000–10.00 mL/min |
| Maximum Pressure | 6,000 psi (414 bar) |
| Pulsation | ≤2% at 1 mL/min & 1,000 psi (with dampener) |
| Flow Accuracy | ±2% of full scale (≥0.20 mL/min, 20% IPA/water, 1,000 psi) |
| Flow Precision | ≤0.2% RSD |
| Fluid Path Materials | Stainless steel, PEEK, optional titanium |
| Dimensions | 22.9 × 25.4 × 43.2 cm (H×W×D) |
| Weight | 13.6 kg |
| Power | 100–240 VAC, 50–60 Hz |
| Control Interfaces | RS-232, Micro-USB, Analog (0–10 V / 4–20 mA), Run/Stop I/O |
| Brand | SSI |
|---|---|
| Origin | Imported |
| Model | HF |
| Flow Rate | 0.1–300 mL/min |
| Maximum Pressure (Constant Pressure Mode) | 10,000 psi |
| Maximum Pressure (Constant Flow Mode) | 8,500 psi |
| Flow Accuracy | ≤5% of set point (at ≥5 mL/min, 1,000 psi) |
| Flow Precision | ≤0.5% RSD |
| Pulsation | ≤±5.0% (at 150 mL/min, 3,000 psi) |
| Dimensions | 228 W × 356 H × 559 D mm |
| Weight | 22.7 kg |
| Brand | SSI |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | SSI LS CLASS |
| Flow Rate | 0.000–10.00 mL/min (up to 6,000 psi) |
| Pressure Rating | 6,000 psi (414 bar) |
| Pulsation | ≤2% at 1 mL/min & 1,000 psi (5/10/40 mL heads) |
| Flow Accuracy | <2% (≥0.20 mL/min, 20% IPA/water, 1,000 psi) |
| Flow Precision | 0.2% RSD |
| Pressure Accuracy | ±2% FS |
| Wetted Materials | Sapphire, Ruby, UHMWPE, PTFE |
| Dimensions | 16.5 × 17.8 × 40.6 cm (H×W×D) |
| Weight | 6.9 kg |
| Power Supply | 100–240 VAC (±10%), 50–60 Hz |
| Control Interfaces | RS-232, Micro-USB, Run/Stop TTL, Analog (0–10 V, 4–20 mA) |
| Brand | SSI |
|---|---|
| Model | LS Class |
| Flow Rate | 10 mL/min |
| Maximum Pressure | 6,000 psi |
| Drive Type | Micro-stepping Motor |
| Pump Mechanism | Positive Displacement Single Piston |
| Pulsation | ≤2% (at 1 mL/min, 1,000 psi |
| Flow Accuracy | <2% (for 0.20–0.80 mL/min at 1,000 psi, 20% IPA/water |
| Flow Precision | 0.2% RSD |
| Fluid Path Materials | Stainless Steel, PEEK, optional Titanium, Sapphire, Ruby, UHMWPE, PTFE |
| Dimensions | 16.5 cm H × 17.8 cm W × 40.6 cm D |
| Weight | 6.9 kg |
| Power Supply | 100–240 VAC ±10%, 50–60 Hz |
| Control Interfaces | RS-232, Micro USB 2.0, Analog (0–10 V / 4–20 mA), Front Panel Keypad, Run/Stop |
| Brand | SSI |
|---|---|
| Origin | Imported |
| Model | LS CLASS |
| Flow Rate | 10 mL/min |
| Maximum Pressure | 6,000 psi |
| Flow Accuracy | <2% (at ≥0.20 mL/min, 20% IPA/water, 1,000 psi) |
| Pulsation | ≤2% (1 mL/min, 1,000 psi, with pulse dampener) |
| Flow Precision | 0.2% RSD |
| Fluid Path Materials | Stainless Steel, PEEK, optional Titanium, Sapphire, Ruby, UHMWPE, PTFE |
| Dimensions | 16.5 cm H × 17.8 cm W × 40.6 cm D |
| Weight | 6.9 kg |
| Power Supply | 100–240 VAC ±10%, 50–60 Hz |
| Control Interfaces | RS-232, Micro USB 2.0, Analog (0–10 V / 4–20 mA), Front Panel Keypad |
| Brand | SSI |
|---|---|
| Flow Rate | 0.000–10.00 mL/min (up to 6,000 psi) |
| Pressure Rating | 6,000 psi (stainless steel path), 5,000 psi (PEEK path) |
| Pulse Dampening | ≤2% at 1 mL/min & 1,000 psi |
| Flow Accuracy | <2% deviation (≥0.20 mL/min, 20% IPA/water, 1,000 psi) |
| Flow Precision | 0.2% RSD |
| Fluid Path Materials | Stainless Steel, PEEK, Sapphire, Ruby, UHMWPE, PTFE |
| Dimensions | 16.5 × 17.8 × 40.6 cm (H×W×D) |
| Weight | 6.9 kg |
| Power | 100–240 VAC ±10%, 50–60 Hz |
| Control Interface | Micro-USB, front-panel keypad with Run/Stop, integrated prime/purge valve, outlet filter, drip tray |
| Brand | SSI |
|---|---|
| Origin | Imported |
| Model | LL010SFP1A |
| Flow Rate | 0.00–10.00 mL/min (up to 6,000 psi |
| Pressure Rating | 6,000 psi |
| Flow Accuracy | <2% deviation (at ≥0.20 mL/min, 20% IPA/water, 1,000 psi) |
| Flow Precision | ≤0.2% RSD |
| Pulsation | ≤2% (at 1 mL/min, 1,000 psi) |
| Fluid Path Materials | Stainless Steel, PEEK, Sapphire, Ruby, UHMWPE, PTFE |
| Dimensions | 16.5 × 17.8 × 40.6 cm (H×W×D) |
| Weight | 6.9 kg |
| Power Input | 100–240 VAC ±10%, 50–60 Hz |
| Control Interface | Micro-USB, front-panel keypad with Run/Stop, integrated prime/purge valve, outlet filter, drip tray |