RF Microwave Measurement System
Filter
Showing all 11 results
| Brand | Anritsu |
|---|---|
| Origin | Japan |
| Model | MG36021A |
| Frequency Range | 10 MHz to 20 GHz |
| Frequency Resolution | 0.001 Hz |
| Phase Noise (typ.) | –126 dBc/Hz at 10 GHz, 10 kHz offset |
| Harmonic Suppression | –10 dBc (nom.) |
| Non-Harmonic Spurious | –60 dBc |
| Frequency Switching Time (list mode) | <50 µs |
| Max Output Power | +18 dBm @ 20 GHz |
| Power Level Accuracy | ±1.5 dB |
| Reference Input/Output | 10 MHz |
| Supply Voltage | +12 V DC |
| Dimensions | 4 in × 4 in × 0.8 in (101.6 mm × 101.6 mm × 20.3 mm) |
| Control Interfaces | USB 3.0 Type-C, SPI (via CONTROL/SPI connector) |
| RF & Reference Connectors | SMA (REF IN, REF OUT, RF OUT) |
| Thermal Management | Optional external heatsink kit available |
| Brand | Anritsu |
|---|---|
| Origin | Japan |
| Model | MG3740A |
| Frequency Range | 10 kHz – 6 GHz |
| SSB Phase Noise | ≤ –140 dBc/Hz @ 100 MHz (20 kHz offset, CW), ≤ –131 dBc/Hz @ 1 GHz (20 kHz offset, CW) |
| Output Level Range | –110 to +17 dBm (standard), –144 to +17 dBm (with option) |
| Switching Speed | < 600 µs (frequency/amplitude, list/scan mode) |
| Modulation | FM/AM/φM/Pulse (standard) |
| Reference Oscillator Options | Standard (±1×10⁻⁶/year), High-Stability OCXO (±1×10⁻⁷/year), Rubidium (±1×10⁻¹⁰/month) |
| Interfaces | 1000BASE-T Ethernet, GPIB, USB 2.0 |
| SCPI Compliance | Full |
| Power Meter Support | Up to two USB power sensors (optional, sold separately) |
| Digital Modulation Software | IQproducer (license required, sold separately) |
| BER Measurement Capability (option) | Input bit rate 100 bps – 40 Mbps |
| Brand | Anritsu |
|---|---|
| Origin | Japan |
| Model | ML2490A / ML2480B / ML2430A |
| Frequency Range | Up to 50 GHz |
| Dynamic Range | Up to 90 dB |
| Sensor Modes | CW, Pulsed, Modulated |
| Compatible Software | PowerMax™ (ML2480B/ML2490A), PowerSuite (ML243xA) |
| Interface | Ethernet (PowerMax™), GPIB/RS-232 (PowerSuite) |
| OS Support | Windows XP SP2+ (PowerMax™), Windows 95+ (PowerSuite) |
| Brand | Anritsu |
|---|---|
| Origin | Japan |
| Model | ML2490A (Pulse-Optimized), ML2480B (Broadband Modulated), ML2430A (CW-Optimized) |
| Frequency Range | Up to 50 GHz |
| Dynamic Range | Up to 90 dB |
| Sensor Modes | CW, Pulsed, and Modulated Signal Support |
| Included Software | PowerMax™ (ML2480B/ML2490A), PowerSuite (ML243xA) |
| Interface | Ethernet (ML2480B/ML2490A), GPIB/RS-232 (ML243xA) |
| Compliance | Designed for ISO/IEC 17025 traceable calibration workflows, compatible with GLP/GMP data integrity requirements via audit-trail-capable software logging |
| Brand | ZEPTOOLS |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Country of Origin | China |
| Model | PicoFemto NI-100 |
| Pricing | Upon Request |
| Load Range | 100 mN |
| Force Resolution | 10 µN |
| Response Time | 50 ms |
| Closed-Loop XY Nanopositioning Stage | Travel ±20 µm (100 µm total), Positional Accuracy: 20 nm |
| Open-Loop XYZ Coarse Stage | XY ±10 mm, Z 10 mm, Minimum Step Size ≤1 nm |
| Dimensions (Nanoforce Stage Only) | 130 × 65 × 55 mm |
| Weight (Bare Stage) | ~300 g |
| Max Sample Size | 30 × 30 mm |
| Optional Modules | High-Temperature Heating (up to 400 °C), Electrical Biasing |
| Brand | Vaunix |
|---|---|
| Origin | Italy |
| Model | LSW-102PDT-75F |
| Impedance | 75 Ω |
| Switch Type | SPDT (Single-Pole Double-Throw), Normally Open/Normal Closed Configurable |
| Frequency Range | DC to 6 GHz |
| Insertion Loss | < 0.8 dB (typ. @ 3 GHz) |
| Isolation | > 75 dB (typ. @ 3 GHz) |
| VSWR | < 1.3:1 (typ. @ 3 GHz) |
| Power Handling | +30 dBm (1 W) CW |
| Switching Speed | < 15 µs |
| USB Interface | USB 2.0, Class Compliant, No Driver Required |
| Control | SCPI over USB or Vendor SDK (C/C++, Python, LabVIEW, MATLAB) |
| Operating Temperature | –20 °C to +70 °C |
| Dimensions | 63.5 × 44.5 × 14 mm |
| Weight | 42 g |
| Brand | Vaunix |
|---|---|
| Origin | Italy |
| Model | LSW-602P4T |
| Power Supply | USB Bus-Powered |
| Control Interface | USB 2.0 (Virtual COM Port) |
| Switch Type | SP4T (Single-Pole, Four-Throw) |
| Frequency Range | DC to 6 GHz |
| Insertion Loss | < 1.2 dB (typ. @ 3 GHz) |
| Isolation | > 75 dB (typ. @ 3 GHz) |
| VSWR | < 1.5:1 (typ. @ 3 GHz) |
| Switching Speed | < 15 µs (settle time) |
| Repeatability | ±0.02 dB amplitude, ±0.1° phase (typ.) |
| Operating Temperature | 0 °C to +50 °C |
| Compliance | RoHS 2, CE, FCC Part 15 Class B |
| Brand | Vaunix |
|---|---|
| Origin | Italy |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Imported |
| Model | TS-LDA-203B |
| Pricing | Contact for Quotation |
| Brand | Vaunix |
|---|---|
| Origin | Italy |
| Model | TS-LDA-802-12 |
| Frequency Range | 200–8000 MHz |
| Attenuation Range | 120 dB |
| Resolution | 0.1 dB |
| Channels | 12 |
| Impedance | 50 Ω |
| Interface | USB + Ethernet (with configurable static IP or DHCP) |
| Control Software | GUI, Windows/Linux/macOS SDK, LabVIEW VIs, Python examples |
| Rack Unit | 1U |
| Application Domain | RF ATE, 5G/Wi-Fi 6E/LTE/DVB/Microwave Radio Testing |
| Compliance | RoHS-compliant, CE-marked, FCC Part 15 Subpart B compliant |
| Brand | Vaunix |
|---|---|
| Origin | Italy |
| Model | LPD-752-16 |
| Type | 75 Ω, 2-Way Passive Power Divider |
| Frequency Range | DC to 2.5 GHz |
| Insertion Loss | ≤3.5 dB (typ.) |
| Isolation | ≥20 dB (typ.) |
| VSWR | ≤1.35:1 (typ.) |
| Connector Type | SMA Female |
| Operating Temperature | –40 °C to +85 °C |
| Brand | Vaunix |
|---|---|
| Origin | Italy |
| Model | LPS-802 |
| Type | Analog Voltage-Controlled Linear Phase Shifter |
| Frequency Range | 2–8 GHz |
| Phase Shift Range | 0–360° |
| Insertion Loss | < 4.5 dB (typ.) |
| VSWR | < 1.5:1 |
| Control Voltage Range | 0–10 VDC |
| Phase Accuracy | ±3° (over temperature and frequency) |
| Repeatability | ±0.5° |
| Power Handling | +27 dBm (max, CW) |
| Connector Type | SMA Female (input/output) |
| Operating Temperature | –20 °C to +70 °C |