RF & Microwave Test Instruments
Filter
Showing 1–30 of 35 results
| Brand | AERO |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | FSAR-mX |
| Pricing | Available Upon Request |
| Operating Band | X-band (9.6 GHz center frequency) |
| Polarization | Dual-pol (HH/HV or VV/VH configurable) |
| Platform Integration | UAV-mounted, fixed-wing & rotary-wing compatible |
| Data Output | Raw IQ data (complex baseband), Level 1 SLC products |
| Resolution | <0.3 m range × <0.5 m azimuth (depending on altitude and integration time) |
| Scan Range | Up to 8 km swath width (typical at 1,200 m AGL) |
| Weight | ≤4.2 kg (including enclosure and mounting interface) |
| Power Consumption | ≤45 W (28 VDC input) |
| Interface | Gigabit Ethernet + GPIO sync trigger |
| Environmental Rating | IP65 (enclosure), -20°C to +60°C operational |
| Brand | AERO |
|---|---|
| Model | LiDAR 220N |
| Weight | 2.0 kg |
| Maximum Range | 200 m |
| Field of View | 360° horizontal × 40° vertical (40-line rotating scan) |
| Integrated Sensors | 40-channel LiDAR + IMU + RGB camera |
| Positioning | GNSS-aided inertial navigation with cloud-based trajectory correction (base-station-free cm-level point cloud accuracy) |
| Origin | Beijing, China |
| Category | Antenna and Radar Cross Section Measurement System |
| Brand | AERO |
|---|---|
| Model | LiDAR X3-H |
| Application | Airborne Topographic Mapping, Forestry Inventory, Power Line Inspection |
| Laser Wavelength | 905 nm |
| Laser Safety Class | IEC 60825-1 Class 1 |
| Maximum Range | 190 m @ 10% reflectivity, 450 m @ 80% reflectivity |
| Integrated Camera Resolution | 26 MP |
| Mounting Compatibility | DJI Matrice 350 RTK, Matrice 600 Pro |
| Operational Mode | GNSS-INS Direct Georeferencing (Base Station–Free) |
| Weight | < 2.8 kg (system, typical configuration) |
| Dimensions | ≤ 220 × 180 × 140 mm |
| Data Output Format | LAS/LAZ, E57, PLY, GeoTIFF, POS files |
| Brand | AERO |
|---|---|
| Origin | Beijing, China |
| Model | PSAR-Ku / PSAR-X / PSAR-C / PSAR-L |
| Frequency Bands | Ku (12–18 GHz), X (8–12 GHz), C (4–8 GHz), L (1–2 GHz) |
| Platform Integration | UAV-mounted (multirotor & fixed-wing), lightweight & low-power architecture |
| Polarization Modes | Single-, dual-, and full-polarimetric real-time imaging |
| Operational Modes | Stripmap, Spotlight, GMTI |
| Imaging Capability | All-weather, day/night SAR data acquisition |
| Brand | AERO |
|---|---|
| Origin | Sweden |
| Model | SE-40/70/150 |
| Center Frequencies | 52 MHz / 80 MHz / 124 MHz |
| Frequency Ranges | 15–105 MHz / 20–140 MHz / 20–280 MHz |
| Dynamic Range | 192 dB (32-bit) |
| Time Window | 0–1600 ns |
| Sampling Interval | 3.125 ns (320 MHz) |
| Stacking Rate | 32,000 traces/sec (45 dB SNR improvement) |
| Pulse Repetition Frequency | 156 kHz |
| Max Penetration Depth (Airborne/Ground/Freshwater) | 15/30/— m |
| Vertical/Horizontal Resolution | 48/141 cm |
| Operating Temperature | −20 °C to +50 °C |
| Dimensions (L×W×H) | 200×15×21 cm / 139×15×21 cm / 92×22×21 cm |
| Weight | 5.8 kg / 4.9 kg / 4.6 kg |
| UAV Payload Requirement | ≥6 kg / ≥5 kg / ≥5 kg |
| Brand | Anritsu |
|---|---|
| Origin | Japan |
| Model | MG36021A |
| Frequency Range | 10 MHz to 20 GHz |
| Frequency Resolution | 0.001 Hz |
| Phase Noise (typ.) | –126 dBc/Hz at 10 GHz, 10 kHz offset |
| Harmonic Suppression | –10 dBc (nom.) |
| Non-Harmonic Spurious | –60 dBc |
| Frequency Switching Time (list mode) | <50 µs |
| Max Output Power | +18 dBm @ 20 GHz |
| Power Level Accuracy | ±1.5 dB |
| Reference Input/Output | 10 MHz |
| Supply Voltage | +12 V DC |
| Dimensions | 4 in × 4 in × 0.8 in (101.6 mm × 101.6 mm × 20.3 mm) |
| Control Interfaces | USB 3.0 Type-C, SPI (via CONTROL/SPI connector) |
| RF & Reference Connectors | SMA (REF IN, REF OUT, RF OUT) |
| Thermal Management | Optional external heatsink kit available |
| Brand | Anritsu |
|---|---|
| Origin | Japan |
| Model | MG3740A |
| Frequency Range | 10 kHz – 6 GHz |
| SSB Phase Noise | ≤ –140 dBc/Hz @ 100 MHz (20 kHz offset, CW), ≤ –131 dBc/Hz @ 1 GHz (20 kHz offset, CW) |
| Output Level Range | –110 to +17 dBm (standard), –144 to +17 dBm (with option) |
| Switching Speed | < 600 µs (frequency/amplitude, list/scan mode) |
| Modulation | FM/AM/φM/Pulse (standard) |
| Reference Oscillator Options | Standard (±1×10⁻⁶/year), High-Stability OCXO (±1×10⁻⁷/year), Rubidium (±1×10⁻¹⁰/month) |
| Interfaces | 1000BASE-T Ethernet, GPIB, USB 2.0 |
| SCPI Compliance | Full |
| Power Meter Support | Up to two USB power sensors (optional, sold separately) |
| Digital Modulation Software | IQproducer (license required, sold separately) |
| BER Measurement Capability (option) | Input bit rate 100 bps – 40 Mbps |
| Brand | Anritsu |
|---|---|
| Origin | Japan |
| Model | ML2490A / ML2480B / ML2430A |
| Frequency Range | Up to 50 GHz |
| Dynamic Range | Up to 90 dB |
| Sensor Modes | CW, Pulsed, Modulated |
| Compatible Software | PowerMax™ (ML2480B/ML2490A), PowerSuite (ML243xA) |
| Interface | Ethernet (PowerMax™), GPIB/RS-232 (PowerSuite) |
| OS Support | Windows XP SP2+ (PowerMax™), Windows 95+ (PowerSuite) |
| Brand | Anritsu |
|---|---|
| Origin | Japan |
| Model | ML2490A (Pulse-Optimized), ML2480B (Broadband Modulated), ML2430A (CW-Optimized) |
| Frequency Range | Up to 50 GHz |
| Dynamic Range | Up to 90 dB |
| Sensor Modes | CW, Pulsed, and Modulated Signal Support |
| Included Software | PowerMax™ (ML2480B/ML2490A), PowerSuite (ML243xA) |
| Interface | Ethernet (ML2480B/ML2490A), GPIB/RS-232 (ML243xA) |
| Compliance | Designed for ISO/IEC 17025 traceable calibration workflows, compatible with GLP/GMP data integrity requirements via audit-trail-capable software logging |
| Brand | Biaozhuo |
|---|---|
| Origin | Shanghai, China |
| Model | BIO/AB-D-II |
| Disc Diameter | 90.0 mm ± 0.02 mm |
| Thickness | 2.5 mm ± 0.05 mm |
| Center-to-Circle Distances | S=20.0 mm, T=25.0 mm, L=30.0 mm, E=35.0 mm |
| Nominal Diameters | S-group: 12.0, 16.0, 20.0 mm |
| T-group | 12.0, 16.0, 20.0 mm |
| L-group | 14.0, 16.0, 22.0 mm |
| E-group | 16.0, 18.0 mm |
| Expanded Uncertainty (k=2) | ≤ 0.03 mm |
| Compliance | JJG 1614–2017 |
| Brand | Biaozhuo |
|---|---|
| Model | DB100 |
| Origin | Shanghai, China |
| Flow Range | 20–200 L/min |
| Calibration Points | 28.3 L/min, 50 L/min, 100 L/min |
| Flow Accuracy | ±1% of reading |
| Temperature Measurement Error | ±0.5 °C |
| Barometric Pressure Error | ±3.0 mbar |
| Weight | 1.5 kg |
| Power Supply | Dual-mode (AC/DC) |
| Interface | Dedicated pneumatic coupling for airborne microbial samplers |
| Brand | Biaozhuo |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | DP-1 |
| Price Range | USD 1,400 – 7,000 |
| Frequency Range | 10 Hz – 500 kHz |
| Amplitude Accuracy | ±0.1 dB (10–100 kHz), ±0.2 dB (100–200 kHz), ±0.5 dB (200–500 kHz) |
| Resolution | 0.1 dB |
| Simulated Strain Output | ~2484 µε |
| Bridge Configuration | Full-Bridge (Excitation Voltage: 2 V) |
| Operating Temperature | 10–30 °C |
| Relative Humidity | 20–85 % RH |
| Brand | BIAOZHUO |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | DTY-5 |
| Price Range | USD 1,400 – 7,000 |
| Speed Measurement Range | 0–20.00 m/s |
| Speed Resolution | 0.001 m/s |
| Acceleration Measurement Range | 0–99.99 cm/s² |
| Acceleration Resolution | 0.01 cm/s² |
| Measurement Accuracy | ±3×10⁻³ (relative) |
| Crystal Oscillator Frequency Stability | ±1×10⁻⁴ |
| Timebase Drift (4 h) | ≤1.0×10⁻⁴ |
| Pulley Circumference | Multiple of 314 mm (recommended: 628 mm) |
| Power Supply | AC 220 V, 50 Hz |
| Brand | Biaozhuo |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | SUV-6T |
| Price | USD 9,200 (FOB Shanghai) |
| Brand | Biaozhuo |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | TCJ-5 |
| Price | USD 9,300 (FOB Shanghai) |
| Brand | Biaozhuo |
|---|---|
| Model | WTJ-5A |
| Frequency Range | 10 Hz to 20 MHz |
| Internal Timebase Accuracy | ±1 × 10⁻⁶ |
| Voltage Range (Vpp) | 40 mV to 20 V |
| Voltage Measurement Accuracy | ±4% |
| Origin | Shanghai, China |
| Compliance | JJG (CAAC) 0061–2001 |
| Brand | Panorama |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Regional Category | Domestic (China) |
| Model | LPMM Series |
| Pricing | Available Upon Request |
| IP Rating | IP66 |
| Mounting | Panel-Mount (Conductive or Non-Conductive Surfaces) |
| Frequency Bands | 3.4–3.8 GHz & 4.9–6.0 GHz |
| MIMO Configuration | 4×4 |
| Form Factor | Ultra-Thin, Compact Enclosure |
| Integrated Cable | RG174 |
| Compliance | RoHS, FCC Part 15 Subpart B (as applicable to host system), CE RED Directive (when integrated into compliant end equipment) |
| Brand | Panorama |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Regional Category | Domestic (China) |
| Model | B4BE Series |
| Pricing | Available Upon Request |
| Brand | Panorama |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | DMM Series |
| Pricing | Available Upon Request |
![DesTest DWMM4[G]-6-60 Series 4×4 MIMO Omnidirectional Antenna for 4G/5G LTE and GNSS](https://img.instrumenthive.com/raw_images/IH-143150-1.webp "DesTest DWMM4[G]-6-60 Series 4×4 MIMO Omnidirectional Antenna for 4G/5G LTE and GNSS")
| Brand | Panorama |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | DWMM4 Series |
| Pricing | Available Upon Request |
| Frequency Range | 617–6000 MHz |
| GPS/GNSS Integration | Yes (with 26 dB LNA and bandpass filtering) |
| Ingress Protection | IP66 |
| Cable Type | Integrated Flame-Retardant CS32 (RF), FR CS29 (GNSS) |
| Mounting Options | Wall, Mast, Panel, Desk |
| Radiation Pattern | Omnidirectional |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | EEDs |
| Pricing | Available Upon Request |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | HKCube 1 |
| Pricing | Available Upon Request |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | HKCube Range 1 |
| Pricing | Available Upon Request |
| Brand | PMM |
|---|---|
| Origin | Italy |
| Model | PMM 1000 |
| Processor | Motorola DSP56002 & Intel 80C186/187 |
| Input Resolution | 18-bit per channel |
| ADC Interface | IEEE-488 (GPIB) |
| Self-test | On power-up |
| Power Supply | 180–250 VAC / 90–125 VAC, 50–60 Hz |
| Max Power Consumption | 40 W |
| Dimensions | 460 × 448 × 132 mm |
| Weight | 12 kg |
| Operating Temperature | 0–50 °C |
| Storage Temperature | −20–80 °C |
| Storage Humidity | ≤92% RH, non-condensing |
| Software Platform | Windows-based |
| Harmonic Standards Compliance | IEC 61000-3-2, IEC 61000-3-4, IEC 61000-4-7, IEC 555-2 |
| Flicker Standards Compliance | IEC 61000-3-3 (replaces IEC 1000-3-3), IEC 60468 (Amend. 1), IEC 60555-3 (Amend. 1), IEC 60868 (Amend. 1) |
| Voltage Input Range | 90–300 Vrms (flicker: 40–504 Vrms) |
| Current Input Range | 5 mA–16 A (shunt ranges: 0.16 / 0.8 / 4 / 20 A) |
| Voltage Channel Input Impedance | >8 MΩ |
| Current Channel Impedance | <3.03 mΩ (max range) |
| Max Potential Difference | 150 mV |
| Accuracy | Better than ±0.2% for harmonics |
| Anti-aliasing Filter Attenuation | 70 dB |
| Transient Harmonic Smoothing | Low-pass filter, 1° phase shift (1.5 s period) |
| Measurement Modes | Single-shot, time-limited, continuous |
| Data Storage | Ring-buffer architecture retaining last 2.5 minutes of continuous measurement |
| FFT Points | 2048 |
| Frequency Range | 45–65 Hz (extendable to 16–2500 Hz) |
| Flicker Metrics | Pst, Plt, Pmax, P50%, P10%, P3%, P1%, P0.1%, CPF, d(t), dmax, dc |
| Voltage Fluctuation Resolution | ±2% error for d(t) and dmax |
| AC Power Supply Options | TPS 1500 (1-phase, 1.5 kVA), TPS-K10 (3-phase, 10 kVA), TPS-K20 (3-phase, 20 kVA) |
| Brand | PMM |
|---|---|
| Origin | Italy |
| Model | PMM 1008 |
| Generator Output | 160 A (continuous), 1200 A (transient) |
| Continuous Field Levels | 1–100 A/m (IEC/EN 61000-4-8 Classes 1–5) |
| Transient Field Levels | 300–1000 A/m |
| Coil Dimensions | 1.035 m × 1.035 m × 35 mm |
| Antenna Factor | 0.87 |
| Coil Inductance | ~0.6 µH |
| Coil Resistance | 670 µΩ |
| Generator Dimensions (W×D×H) | 385 × 215 × 400 mm |
| Generator Weight | 28 kg |
| Coil + Trolley + Stand Total Weight | 50 kg |
| Power Supply | 198–264 V AC, 50/60 Hz |
| Interface | RS232/RS485 (DB9) |
| Safety | Interlock-enabled, thermal cutoff, ≤4 Vrms open-circuit voltage |
| Compliance | IEC/EN 61000-4-8, EU Directives 89/336/EEC & 73/23/EEC |
| Brand | PMM |
|---|---|
| Origin | Italy |
| Model | PMM 9010 |
| Frequency Range | 10 Hz – 30 MHz (expandable to 3 GHz / 6 GHz) |
| Weight | 4 kg (main unit) |
| Power Supply | DC battery-operated (integrated Li-ion) |
| Compliance | Fully compliant with CISPR 16-1-1:2023, EN 55016-1-1, MIL-STD-461G, DO-160G, FCC Part 15/18 |
| Calibration Architecture | Fully digital signal path with built-in RF self-calibration source |
| Detection Modes | Peak, Quasi-Peak, Average, RMS, CISPR-Average, CISPR-RMS |
| RBW Filters | Digital implementation per CISPR 16-1-1 (200 Hz, 9 kHz, 120 kHz, 1 MHz) |
| Software Control | Native Narda STS EMCO software |
| Module Architecture | Pre-calibrated hot-swap functional modules (e.g., click noise analyzer, LISN interface, near-field probes) |
| Brand | PMM |
|---|---|
| Origin | Italy |
| Model | PMM CA0010 |
| Frequency Range | 150 kHz – 30 MHz |
| Frequency Accuracy | ±100 Hz |
| Amplitude Range | 20 dBµV – 95 dBµV |
| Amplitude Accuracy | ±0.1 dB |
| Pulse Rise Time | ≥100 µs |
| Pulse Interval | ≥100 µs |
| Time Step Resolution | 10 µs |
| Pulse Repetition Rate | 1 Hz – 500 Hz |
| Repetition Rate Accuracy | ±1 Hz |
| Amplitude Flatness | ≤1.8 dB (150 kHz – 30 MHz) |
| Amplitude Resolution | 0.1 dB |
| Max Input Level | 140 dBµV (2 W) |
| Built-in LISN | Single-phase, 16 A, compliant with CISPR 16-1-2 (150 kHz – 30 MHz) |
| RF Connector | BNC (F) |
| Operating Temperature | −5 °C to +45 °C |
| Dimensions | 235 mm × 105 mm × 335 mm |
| Weight | 4.1 kg |
| Standards Compliance | CISPR 16-1-1, CISPR 16-1-2, CISPR 14-1 |
| Dynamic Range Enhancement | Integrated preselector |
| Signal Generation Capabilities | CW, click, and CISPR pulse signals |
| Software Resolution | 500 µs QP detection, full IF bandwidth display |
| Brand | PMM |
|---|---|
| Origin | Italy |
| Type | RF Power Amplifier |
| Power Range | 15 W to 10,000 W |
| Compression Point | 1 dB typical |
| Stability | High long-term amplitude and phase stability |
| Configuration | Benchtop or rack-mountable (model-dependent) |
| Brand | ZEPTOOLS |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Country of Origin | China |
| Model | PicoFemto NI-100 |
| Pricing | Upon Request |
| Load Range | 100 mN |
| Force Resolution | 10 µN |
| Response Time | 50 ms |
| Closed-Loop XY Nanopositioning Stage | Travel ±20 µm (100 µm total), Positional Accuracy: 20 nm |
| Open-Loop XYZ Coarse Stage | XY ±10 mm, Z 10 mm, Minimum Step Size ≤1 nm |
| Dimensions (Nanoforce Stage Only) | 130 × 65 × 55 mm |
| Weight (Bare Stage) | ~300 g |
| Max Sample Size | 30 × 30 mm |
| Optional Modules | High-Temperature Heating (up to 400 °C), Electrical Biasing |
| Brand | Vaunix |
|---|---|
| Origin | Italy |
| Model | LSW-102PDT-75F |
| Impedance | 75 Ω |
| Switch Type | SPDT (Single-Pole Double-Throw), Normally Open/Normal Closed Configurable |
| Frequency Range | DC to 6 GHz |
| Insertion Loss | < 0.8 dB (typ. @ 3 GHz) |
| Isolation | > 75 dB (typ. @ 3 GHz) |
| VSWR | < 1.3:1 (typ. @ 3 GHz) |
| Power Handling | +30 dBm (1 W) CW |
| Switching Speed | < 15 µs |
| USB Interface | USB 2.0, Class Compliant, No Driver Required |
| Control | SCPI over USB or Vendor SDK (C/C++, Python, LabVIEW, MATLAB) |
| Operating Temperature | –20 °C to +70 °C |
| Dimensions | 63.5 × 44.5 × 14 mm |
| Weight | 42 g |