Salt Spray Test Chamber
Filter
Showing 1–30 of 75 results
| Brand | APKJ |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | AP-YW-02 |
| Price Range | USD 7,000–14,000 (FOB) |
| Spray Mode | Continuous Spray Only |
| Spray Rate | 1–2 mL/80 cm²·h |
| Nozzle Pressure | 0.7–1.0 kg/cm² |
| Fog Removal Method | Air-Compression Exhaust |
| Salt Fog Deposition Rate | 1–2 mL/80 cm²·h |
| Temperature Range | −20°C to +70°C |
| Brand | OEM / Custom-Built |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 12,500 (FOB) |
| Chamber Material | Imported PVC or FRP (Fiberglass-Reinforced Plastic) |
| Saturated Air Tank | SUS316L Stainless Steel, 1.2 mm Thickness |
| Viewing Window | 8–10 mm Acrylic (PMMA), Impact-Resistant |
| Test Temperature Range | 35°C ±1°C (NSS), 50°C ±1°C (ACSS) |
| Saturated Tank Temp | 47°C ±1°C (NSS), 63°C ±1°C (ACSS) |
| Temperature Uniformity | ≤±2°C |
| Temperature Stability | ≤±0.5°C |
| Spray Rate | 1–2 mL/80 cm²/h (avg. over 16 h) |
| Air Pressure Supply | 1 kg/cm² (two-stage regulation) |
| Control System | Dual PID Digital Controllers (Test Chamber & Saturated Tank), 0.1 s–99.99 h Timer, 0–9999 h Accumulated Time Meter |
| Safety Features | Overload Protection, Over-Temperature Cut-off, Auto-Termination on Time Expiry |
| Brand | ATLAS |
|---|---|
| Origin | USA |
| Model | BCX |
| Temperature Range | Exposure Zone up to 55 °C (131 °F), High-Temp Option up to 71 °C (160 °F) |
| Chamber Construction | Fiberglass-Reinforced Polymer (FRP) with Gel-Coated Exposure Zone |
| Solution Reservoir Capacity | 35 US gal (132 L) |
| Spray System | Full-Fog Dispersion Tower or Full-Fog Dispersion II System |
| Humidification | Heated Air-Pressurized Fog Tower with Automatic Fill |
| Heating | Titanium Rod Heaters in Exposure Zone |
| Drainage | Front & Rear Wet-Bottom Drain Assemblies |
| Optional Features | Pneumatic Lid Assist (BCX9000/BCX11000), Transparent Polypropylene Lid (BCX9000), Ridge-Style Condensate-Resistant Lid Design |
| Brand | ATLAS |
|---|---|
| Origin | USA |
| Model | SF Series |
| Chamber Capacity | 420–3680 L |
| Internal Dimensions (W×D×H) | 0.76×0.56×0.99 m to 3.05×1.22×0.99 m |
| External Dimensions (W×D×H) | 1.07×0.97×1.52 m to 3.81×1.52×1.60 m |
| Temperature Range | Ambient to 55 °C (standard operation) |
| Humidity Control | Non-condensing RH 10–98% |
| Salt Spray Deposition Rate | Compliant with ASTM B117 (typically 1.0–2.0 mL/80 cm²/h) |
| Compliance | ASTM B117, ASTM D1735, ISO 9227, ASTM G85 Annexes 4 & 5, ISO 6988, GM 4429P, GM 4465P, CASS, SWAAT, ASTM D2247, FLTM BQ4-2, Corrodcote™ |
| Brand | ATLAS |
|---|---|
| Origin | USA |
| Model | CCX |
| Temperature Range | Up to 71°C (standard), optional up to 90°C |
| Chamber Capacities | 565 L (CCX2000) to 3115 L (CCX11000) |
| Compliance | SAE J2334, Ford BI-123-01, Ford APGE, GM9540P, GMW14872, ASTM B117, ISO 9227, DIN 50021 |
| Control System | PLC-based with programmable multi-step cycling |
| Humidity Generation | Heated foam tower with pressure-regulated air bleed |
| Exposure Zone Construction | Fiberglass-reinforced polymer (FRP) with gel-coated interior |
| Solution Reservoir | 227 L (60 gal) standard |
| Heating | Titanium rod heaters in exposure zone |
| Lid Design | Ridge-roof configuration to prevent condensate drip |
| Sealing | Dual magnetic gasket on transparent lid |
| Optional Features | SO₂ injection, Prohesion™ mode, non-condensing humidity control |
| Brand | ATLAS |
|---|---|
| Origin | USA |
| Model | SF Walk-In Series |
| Internal Dimensions (L×W×H) | 1.83×1.83×2.13 m (SF7000) / 2.44×1.83×2.13 m (SF9500) / 3.05×1.83×2.13 m (SF12000) |
| External Dimensions (L×W×H) | 2.13×2.13×2.74 m (SF7000) / 2.74×2.13×2.74 m (SF9500) / 3.35×2.13×2.74 m (SF12000) |
| Test Volume | 7,136–11,893 L |
| Temperature Range | Ambient to 49 °C (120 °F) |
| Construction | PVC-lined interior with sloped fiberglass or low-carbon steel chamber walls |
| Standard Features | Tempered Plexiglas® observation window, internal safety interlock door, elevated floor with rubber/plastic matting, external-mounted controls and lighting, digital temperature controller with display |
| Brand | C&W |
|---|---|
| Origin | Netherlands |
| Model | CW Series Cyclic Corrosion Test Chamber |
| External Dimensions (L×W×H) | 1000×600×645 mm to 2750×1220×1630 mm |
| Internal Dimensions (L×W×H¹×H²) | 600×450×375×565 mm to 2000×1000×850×1175 mm |
| Power Supply | Single-phase or three-phase 380 V, 50/60 Hz |
| Compressed Air Requirement | Oil-free, dry, clean air |
| Humidity Range | 15% to 98% RH (controlled) |
| Temperature Control | Integrated refrigeration compressor system (continuous or standby operation) |
| Optional Features | Deionizer & sediment filter (recommended for water with >50 mg/L TDS), low-water-level alarm, external salt fog collection vessel, condensate-controlled fog generation, variable ventilation, ergonomic control panel, GRP composite enclosure with chemical/thermal resistance, pneumatic lid support, modular sample mounting fixtures |
| Brand | C&W |
|---|---|
| Origin | Netherlands |
| Model | CW1001–CW1020 Series |
| Internal Volume | 100 L to 2000 L |
| External Dimensions (L×W×H) | 1000×600×645 mm to 2750×1220×1630 mm |
| Internal Dimensions (L×W×H¹×H²) | 600×450×375×565 mm to 2000×1000×850×1175 mm |
| Power Supply | 13–32 A, Single- or Three-Phase 230/380 V, 50/60 Hz |
| Compressed Air Requirement | Oil-free, dry, filtered |
| Pressure | 2–4 bar (30–60 psi) for spray generation |
| Temperature Range | 30–80 °C (chamber), ±1 °C accuracy |
| Saturated Air Tower | 65 °C ±1 °C, NiCr heating element with overheat protection and auto-refill humidifier |
| Salt Solution Reservoir | 114 L mobile external tank, integrated filtration, ~14 days continuous operation |
| Control System | Microprocessor-based, 7 programmable test methods, cycle timer with remaining count, spray/dry/purge sequencing |
| Optional | Low-level alarm, ergonomic control panel, GRP corrosion-resistant chamber body, insulated apex lid with gas spring support |
| Compliance | Designed to meet ASTM B117, ISO 9227, JIS Z2241, DIN 50021 requirements |
| Brand | C&W |
|---|---|
| Origin | Netherlands |
| Model | CW1001 |
| Spray Method | Direct Air-Atomized Nozzle |
| Fog Output Rate | 1–2 mL/h |
| Nozzle Operating Pressure | 8.44 kg/cm² (≈120 psi) |
| Fog Collection Rate | 1–2 mL per 80 cm² per hour |
| Temperature Range | Ambient to 55 °C |
| Compliance | ASTM B117, ISO 9227, EN ISO 7253, DIN 50021, JIS Z 2371, SAE J2334, Ford CETP, GMW 14872, VW PV1210, BMW GS 90031, Renault D17 2025, etc. |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Temperature Range | +5°C to 55°C |
| Humidity Range | 85–95% RH |
| Temperature Uniformity | ≤ ±2°C |
| Temperature Fluctuation | ≤ ±0.5°C |
| Salt Spray Deposition Rate | 1–2 mL / 80 cm²·h |
| Spray Modes | Continuous or Cyclic |
| Test Timing Range | 1–999 (s/min/h) adjustable |
| Chamber Volume Options | 60 L / 90 L / 120 L |
| Heating Power | 1.3–1.8 kW |
| Saturation Tank Temperature | Up to 63°C |
| Compliance Standards | ASTM B117, ISO 9227, GB/T 2423.17, GB/T 2423.18, GB/T 2423.26 |
| Brand | COFOMEGRA |
|---|---|
| Origin | Italy |
| Model | CORROSIONBOX |
| Chamber Capacity | 450 L / 1000 L |
| Internal Dimensions (W×D×H) | 800×700×800 mm / 1100×800×1100 mm |
| External Dimensions (W×D×H) | 1320×720×1450 mm / 1640×820×1750 mm |
| Weight | 260 kg / 465 kg |
| Salt Solution Reservoir Capacity | 110 L / 260 L |
| Construction Material | 10 mm thick polypropylene (PP) |
| Chamber Insulation | Double-wall insulated |
| Temperature Range (Salt Fog Mode) | 35°C ± 2°C (standard) |
| Temperature Range (Condensation Mode) | 40°C ± 1°C |
| 雾化方� | �: Compressed air-driven saturated mist generation via central nozzle and diffusion tower |
| Heating System | Immersed heating elements with PID-controlled uniformity |
| Drainage | Integrated floor-level sump with gravity drainage |
| Compliance | Designed to meet ASTM B117, ISO 9227, JIS Z2201, DIN 50021 requirements |
| Brand | OEM / Custom-Built |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Quotation | USD 12,500 (FOB) |
| Chamber Dimensions | W120 × H50 × D100 cm |
| Temperature Uniformity | ±2°C |
| Temperature Fluctuation | ±0.5°C |
| Salt Spray Deposition Rate | 1–2 mL / 80 cm²·h |
| Spray Mode | Continuous or Cyclic (Programmable) |
| Operating Temperature Range | +5°C to 60°C |
| Chamber Construction | Dual-layer UV-stabilized gray PVC with circumferential band-reinforced welded joints |
| Heating System | Independent Ni-Cr alloy heaters with PT100Ω RTD sensing |
| Control System | LED-display PID temperature controller with real-time logging capability |
| Spray System | Tower-type atomizer with non-crystallizing nozzles |
| Accessories | Standard漏斗 (funnel) & calibrated measuring cylinder, inline water filtration for brine supply, pre-heated brine delivery ensuring thermal equilibrium with chamber ambient |
| Brand | OEM / Custom Brand |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 12,500 (FOB) |
| Construction | Full PVC-Coated Steel Frame with Reinforced Structural Bracing |
| Spray Method | Programmable or Continuous Salt Fog Generation |
| Control System | Dual-Channel PID Digital Controller (Lab Chamber & Saturated Air Tank) |
| Temperature Range | 10–60°C (Lab Chamber), 20–70°C (Saturated Air Tank) |
| Humidity Range | 30–98% RH (Controlled via Henry’s Law-Based Saturated Air Delivery) |
| Salt Spray Rate | 1.0–2.0 mL/80 cm²/h (Adjustable via Conical Diffuser & Precision Pressure Regulation) |
| Safety Protections | Dual Over-Temperature Cut-Off, Low-Water Level Alarm, Auto-Replenishment Feed System |
| Nozzle Material | Borosilicate Glass (≥4000 hr crystallization-free operation) |
| Display Resolution | ±0.3°C (Temperature), ±0.01 kg/cm² (Pressure), 0.1 hr (Timer) |
| Compliance | ASTM B117, ISO 9227, JIS Z2371, GB/T 10587 |
| Brand | OEM / Custom-Built |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 12,500 (FOB) |
| Chamber Volume Range | 3–116 m³ |
| Temperature Range | RT+10°C to 55°C |
| Temperature Uniformity | ±2°C |
| Temperature Stability | ±0.5°C |
| Salt Spray Deposition Rate | 1–2 mL/80 cm²·h |
| Test Chamber & Lid Material | 8 mm High-Temperature-Resistant PVC |
| 雾化原理 | Bernoulli-Principle Air-Aspirated Atomization |
| 喷嘴材质 | Tempered Borosilicate Glass |
| 喷雾控制 | Programmable Cycle (1 s–9999 h), Adjustable Output (1–2 mL/h per 80 cm²) |
| 加热方� | �: Direct Steam Heating with Titanium Alloy Immersion Heater |
| 控制器 | Siemens S7-1200 PLC, 32-bit Automotive-Grade CPU, LCD Touch Interface, Power-Failure Memory, Dual Auto/Manual Operation Mode |
| Compliance | ASTM B117, ISO 9227, JIS Z2371, GB/T 2423.17, IEC 60068-2-11 |
| Key | Brand: Other Brands |
|---|---|
| Origin | Imported |
| Supplier Type | Authorized Distributor |
| Price | USD 12,500 (FOB) |
| Chamber Volume Options | 108 L / 270 L / 480 L |
| Temperature Range | +5°C to +55°C |
| Humidity Range | 85–95% RH |
| Temp. Uniformity | ≤ ±2°C |
| Temp. Stability | ≤ ±0.5°C |
| Salt Deposition Rate | 1–2 mL/80 cm²·h |
| Spray Mode | Continuous or Cyclic (Programmable) |
| Timer Range | 1 min to 999 h |
| Heating Power | 1.3–1.8 kW |
| Input Voltage | AC 220V±10% / 380V±10%, 50 Hz |
| Compliance | GB/T 2423.17–2022, IEC 60068-2-11, ASTM B117, ISO 9227, MIL-STD-810H, DIN 50021 |
| Brand | OEM / Custom Brand Available |
|---|---|
| Origin | Imported |
| Supplier Type | Authorized Distributor |
| Price | USD 12,500 (FOB) |
| Compliance Standards | ASTM B117, ISO 9227, GB/T 2423.17–2022, IEC 60068-2-11, MIL-STD-810H (Salt Fog), DIN 50021 |
| Temperature Range | +10°C to +70°C |
| Humidity Range | 30–98% RH |
| Salt Solution Temperature Control | Ambient to +50°C |
| Power Supply | AC 220V ±10% / 380V ±10%, 50 Hz |
| Safety Protections | Over-temperature, leakage current, short-circuit, low-water level, over-current, end-of-test auto-shutdown |
| Sealing Method | Water-seal labyrinth structure |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | RT+10°C to 50°C |
| Humidity Range | 85–98% RH |
| Temp. Uniformity | ≤2°C |
| Temp. Stability | ±0.5°C |
| Salt Solution Concentration | 0.1–1% v/v |
| 雾 Generation Method | Compressed Gas (N₂ or Air) via Precision PYREX Nozzle |
| Test Modes | Continuous (ASTM B117), Cyclic (GB/T 2423.17, GB/T 2423.18, ISO 9227), NSS/ASS/CASS Protocols |
| Chamber Dimensions (OK-FH-60 / -80 / -120) | 850×1300×600 mm / 850×1600×600 mm / 900×2000×600 mm (D×W×H) |
| Saturated Air Tank Temp. | 47°C (NSS), 63°C (CASS) |
| Control System | PID-Based Digital Controller with Programmable Cycle Sequencing |
| Safety Features | Dual Over-Temperature Protection, Low-Water Level Alarm, Crystallization-Resistant Nozzle Design |
| Key Features | LCD digital temperature & humidity controller |
|---|---|
| Segment duration | 0–999 h 59 min |
| Loop count | 1–999 partial or 0–999 full cycles |
| Chamber material | seamless fiberglass-reinforced plastic (FRP) |
| Interior components | stainless steel, copper, or corrosion/heat-resistant materials |
| Safety protections | leakage current, short circuit, overtemperature, low-water, end-of-test, overcurrent |
| Compliance | GB/T 2423.17–2022, IEC 60068-2-11, ASTM B117, ISO 9227, DIN 50021 |
| Temperature range | +5°C to 55°C |
| Humidity range | 85–95% RH |
| Temp. uniformity | ≤ ±2°C |
| Temp. stability | ≤ ±0.5°C |
| Salt deposition rate | 1–2 mL / 80 cm²·h |
| Spray modes | continuous or cyclic |
| Timer range | 1–999 (s/min/h) |
| Power supply | AC 220V±10% / 380V±10%, 50 Hz |
| Ambient operating conditions | 5–30°C, ≤85% RH |
| Heating system | independent Ni-Cr alloy heaters |
| Spray system | tower-type atomizer with non-crystallizing nozzles |
| Salt solution pre-heating | thermally balanced with chamber air |
| Filtration | inline water filter on suction line |
| Calibration-ready | PT100 platinum resistance sensors, standard funnel & graduated cylinder for deposition measurement |
| Brand | OEM / Custom-Built |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 21,000 (FOB) |
| Compliance Standards | GB/T 2423.17–1993, IEC 60068-2-11, ASTM B117, MIL-STD-810H, DIN 50021 |
| Temperature Range | +10°C to +65°C |
| Humidity Range | 30–98% RH |
| Salt Fog Concentration | 5% NaCl (by weight), pH 6.5–7.2 |
| Chamber Sealing | Water-Sealed Lid Design |
| Construction Material | Fiberglass-Reinforced Polymer (FRP) Monocoque Body |
| Internal Accessories | Stainless Steel V-Type Sample Racks, Dual Precision Nozzles, Calibrated Funnel Assembly |
| Safety Protections | Overtemperature, Low-Water Level, Leakage Current, Short-Circuit, Overcurrent, End-of-Test Auto-Shutdown |
| Brand | OK-SH |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range (Chamber) | 35 °C ±1 °C (NSS/ACSS) / 50 °C ±1 °C (CASS) |
| Saturation Tower Temperature | 47 °C ±1 °C (NSS/ACSS) / 63 °C ±1 °C (CASS) |
| Spray Rate | 1.0–2.0 mL/80 cm²/h (measured over ≥16 h) |
| Salt Solution Concentration | 5% NaCl (w/v) or 5% NaCl + 0.26 g/L CuCl₂·2H₂O (CASS) |
| Compressed Air Pressure | 1.00 ± 0.01 kgf/cm² |
| Internal Volume | 108–800 L (model-dependent) |
| Chamber Uniformity | ±2.0 °C |
| Power Supply | AC 220 V ±5%, 50 Hz ±0.5 Hz |
| Construction Material | Reinforced PVC with 3D structural bracing |
| Spray Nozzle | Precision borosilicate glass, rated for ≥4000 h operation without crystallization |
| Brand | OK Instruments |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 12,500 (FOB) |
| Chamber Volume | 60 L / 90 L / 120 L |
| Internal Dimensions (D×W×H) | 470×590×400 mm / 600×900×500 mm / 750×1100×500 mm |
| External Dimensions (D×W×H) | 560×1140×1000 mm / 770×1440×1250 mm / 920×1640×1450 mm |
| Temperature Range | +5°C to +55°C |
| Humidity Range | 85–95% RH |
| Temp. Uniformity | ≤ ±2°C |
| Temp. Stability | ≤ ±0.5°C |
| Salt Spray Deposition Rate | 1–2 mL / 80 cm²·h |
| Spray Mode | Continuous or Cyclic (programmable) |
| Timer Range | 1 min – 999 hours |
| Power Supply | AC 220 V ±10% / 50 Hz or AC 380 V ±10% / 50 Hz |
| Heating System | Independent Ni-Cr Alloy Heaters |
| Spray System | Tower-Type Atomizer with Non-Crystallizing Nozzles |
| Construction | Fiberglass-Reinforced Polyester (FRP) Monolithic Body |
| Sealing | Water-Trap Seal Design |
| Compliance | GB/T 2423.17–2022, ASTM B117–22, ISO 9227:2022, IEC 60068-2-11 |
| Brand | OEM / Custom-Built |
|---|---|
| Origin | Imported |
| Supplier Type | Authorized Distributor |
| Price | USD 12,500 (FOB) |
| Chamber Material | 8 mm HCPVC inner tank & lid, 8 mm PVC outer shell with stainless steel frame |
| Saturator | 3 mm SUS304 stainless steel with level indicator |
| Heater | Titanium alloy corrosion-resistant heating element |
| Blower | Oriental Motor multi-wing centrifugal blower (Japan) |
| Pump | Acid-resistant magnetic drive pump |
| Solenoid Valve | SMC series (Japan) |
| SSR | Yaming SSR (Taiwan) |
| Standards Compliance | ASTM B117, ISO 9227, IEC 60068-2-11, JIS Z2371, DIN 50021, GB/T 2423.17 |
| Test Modes | NSS, ASS, CASS, Dry Heat (RT+10°C to 70°C ±1°C), Wet Heat (RT+10°C to 60°C ±1°C, 60–98% RH), Cyclic Corrosion Testing (CCT) |
| Brand | OEM / Private Label |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Quotation | USD 12,500 (FOB) |
| Test Chamber Dimensions | W120 × H50 × D100 cm |
| Temperature Uniformity | ±2°C |
| Temperature Stability | ±0.5°C |
| Salt Spray Deposition Rate | 1–2 mL / 80 cm²·h |
| Operating Temperature Range | +5°C to 60°C |
| Spray Mode | Continuous or Cyclic Programmable |
| Chamber Material | High-Purity Grey PVC (Acid/Alkali Resistant, UV-Stabilized) |
| Saturated Air Tank | Grey PVC Cylindrical Design |
| Viewing Window | 5 mm Thick Acrylic, 100° Angled Roof Geometry |
| Sample Rack | V-Shaped PVC Support with 10 mm O-Ring Glass Rods (15°–30° Adjustable Tilt) |
| Nozzle Material | Fused Quartz Glass, Bernoulli-Optimized Orifice |
| Rated Nozzle Lifetime | ≥10,000 h (Under Normal Maintenance & NaCl Solution Use) |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | +5°C to 55°C |
| Humidity Range | 85–95% RH |
| Temperature Uniformity | ≤ ±2°C |
| Temperature Fluctuation | ≤ ±0.5°C |
| Salt Spray Deposition Rate | 1–2 mL/80 cm²·h |
| Spray Mode | Continuous or Cyclic |
| Test Timer | 1–999 (s/min/h) Adjustable |
| Heating System | Independent Ni-Cr Alloy Heaters |
| Temperature Sensor | PT100 Platinum Resistance Thermometer |
| Control System | LED Digital PID Controller |
| Spray Nozzle | Non-Crystallizing Ceramic Nozzle |
| Spray Tower | Tower-Type Atomization System |
| Salt Solution Preheating | Yes, Maintained at Chamber Temperature |
| Salt Solution Filtration | Integrated Water Filter at Suction Line |
| Salt Collection | Standard Funnel + Graduated Cylinder |
| Power Consumption | 1.3–1.8 kW (Model-Dependent) |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Temperature Range | RT+10°C to 60°C ±1°C |
| Temperature Uniformity | ±1.0°C |
| Temperature Fluctuation | ±1°C |
| Salt Spray Deposition Rate | 1–2 mL/80 cm²·h |
| Salt Solution Temperature | RT+10°C to 60°C ±1°C |
| Salt Concentration | 5.0 ±0.5% (w/w) NaCl |
| Humidity Range | 30–98% RH (adjustable) |
| Salt Solution Capacity | ~40 L |
| Operation Mode | Continuous or Intermittent |
| Spray Method | Air-Atomized (Compressed Air Driven) |
| Gas Saturation System | Heated, Deoiled, Humidified Saturated Air Supply |
| Safety Features | Low-Water-Level Cut-off, Over-Temperature Protection, Leakage Current Protection, Real-Time Visual Alarm Indication |
| Control Interface | Touchscreen HMI with Bilingual (EN/CN) Display, Graphical Program Curve Visualization, PID Auto-Tuning (9 Sets), Dry/Wet Bulb Auto-Calibration |
| Compliance Standards | GB/T 2423.17–1993, GB/T 5170.8–1996, GB/T 10587–2006 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 12,500 (FOB) |
| Chamber Dimensions (W×H×D) | 120 × 50 × 100 cm |
| Temperature Range | Ambient +5°C to 60°C |
| Temperature Uniformity | ±2°C |
| Temperature Stability | ±0.5°C |
| Salt Spray Deposition Rate | 1–2 mL/80 cm²·h |
| Spray Mode | Continuous or Cyclic |
| Material | German-imported gray PVC (acid-alkali resistant, high-humidity stable) |
| Viewing Window | 5 mm thick imported acrylic, 100° angled roof design |
| Saturated Air Tank | German PVC, corrosion-resistant cylindrical construction |
| Sample Rack | V-shaped PVC bars with 10 mm O-ring glass supports, adjustable tilt 15°–30° |
| Nozzle Material | Fused quartz glass, Bernoulli-optimized geometry, >10,000 h service life under standard maintenance |
| Control System | PID controller with PT100 sensor, ±0.1°C accuracy, dual pressure regulation, dual overtemperature protection, dry-run and phase-loss safeguards |
| Brand | GHT |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | HT-120A-PF |
| Spray Method | Continuous Air-Atomized Spray |
| Spray Rate | 1.0–2.0 mL / 80 cm² / hr |
| Nozzle Pressure | 0.7–1.0 kg/cm² |
| Fog Removal Method | Positive-Air-Pressure Exhaust |
| Salt Fog Deposition Rate | 1.0–2.0 mL / 80 cm² / hr |
| Temperature Range | Ambient to 63°C |
| Saturation Chamber Temperature (NSS/ACSS) | 47 ± 0.1°C |
| Saturation Chamber Temperature (CASS) | 63 ± 1°C |
| Test Chamber Temperature (NSS/ACSS) | 35 ± 0.1°C |
| Test Chamber Temperature (CASS) | 50 ± 1°C |
| pH of Salt Solution (NSS/ACSS) | 6.5–7.2 |
| pH of Salt Solution (CASS) | 3.0–3.2 |
| Dry Cycle Temperature | 60 ± 2°C, RH ≤ 30% |
| Soak Cycle Temperatures & Humidities | 23 ± 2°C / 50 ± 5% RH |
| Brand | HAIDA INTERNATIONAL |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | HD-E808-120 |
| Spray Method | Adjustable |
| Fog Collection Rate | 1.0–2.0 mL/80 cm²/h (averaged over ≥16 h) |
| Nozzle Pressure | 1.00 ± 0.01 kgf/cm² |
| Test Chamber Temperature Range | RT to 50 °C |
| Internal Dimensions (L×W×H) | 1200 × 500 × 1000 mm |
| Nominal Volume | 600 L |
| Salt Solution Tank Capacity | 40 L |
| Power Supply | AC 220 V, Single-phase + PE, ±10% voltage tolerance, 50 ± 0.5 Hz |
| Max Current | 10 A |
| Temp. Control Accuracy | ±0.1 °C (PID digital controller) |
| Temp. Uniformity | ±1 °C |
| Temp. Fluctuation | ±0.5 °C |
| pH Range (Neutral) | 6.5–7.2 |
| pH Range (Acidic/CASS) | 3.1–3.3 |
| Compliance | GB/T 2423.17–2008, ISO 9227:2006, ASTM B117–2009, JIS H 8502, GB/T 10125–2012, GJB 150.11A–2009 |
| Brand | HAIDA INTERNATIONAL |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | HD-E808-60A |
| Spray Method | Adjustable Continuous/Intermittent |
| Spray Rate | 1.0–2.0 mL/80 cm²/h (averaged over ≥16 h) |
| Nozzle Pressure | 1.00 ± 0.01 kgf/cm² |
| Test Chamber Temperature Range | RT to 50 °C |
| Temperature Uniformity | ±2 °C |
| Temperature Stability | ±1 °C |
| Temperature Resolution | 0.1 °C |
| Chamber Volume | 108 L |
| Internal Dimensions (L×W×H) | 60 × 45 × 40 cm |
| External Dimensions (L×W×H) | ~110 × 65 × 110 cm |
| Weight | ~60 kg |
| Max Power | 2.2 kW |
| Supply | 1Ø AC 220 V, 10 A |
| Compliance | ASTM B117, ISO 9227, GB/T 10125, JIS H8502, IEC 60068-2-11, GJB 150.11A |