Sample Preparation Workstation
Filter
Showing 1–30 of 55 results
| Brand | Ability Technology |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Country of Origin | China |
| Model | SiO-6512 |
| Pricing | Available upon Request |
| Brand | Allsheng |
|---|---|
| Origin | Zhejiang, China |
| Model | Auto-NGS 100 |
| Sample Throughput | 1–24 samples per run |
| Plate Positions | 9 standard deck positions + waste tip disposal zone + liquid waste reservoir |
| Pipetting | 8-channel adjustable-volume pipettor (2–200 µL) |
| Pipetting Accuracy | ±15% at 2 µL |
| Pipetting Precision | ≤5% CV at 2 µL |
| Temperature Modules | 1 programmable thermal block (0–105 °C, ±1 °C accuracy at 55 °C, ±1 °C uniformity) |
| Magnetic Separation | Single 96-well ring-style magnetic stand |
| Environmental Control | HEPA-filtered positive-pressure laminar airflow chamber with UV-C sterilization (254 nm) |
| Power Supply | 100–240 VAC, 50/60 Hz, 900 W nominal |
| Operating Conditions | 10–40 °C ambient, ≤80% RH non-condensing |
| Communication | CAN bus architecture with USB host interface |
| Software | Graphical drag-and-drop protocol builder with multi-tier user permission management (operator, supervisor, administrator) |
| Brand | AMAE |
|---|---|
| Origin | Guangdong, China |
| Model | AM-1200 |
| Type | Integrated Acid Digestion & Vacuum Filtration Workstation for ASTM D7687 / GBZ/T 192.4–2018 Compliant Free Silica Analysis |
| Brand | AMAE |
|---|---|
| Origin | Guangdong, China |
| Model | AM-1200 Series |
| Type | Fully Automated Sample Preparation Workstation for Free Silica Determination (Pyrophosphoric Acid Method) |
| Sample Throughput | Up to 5 samples simultaneously (10-sample unattended sequence) |
| Temperature Control | Full-process constant-temperature heating (acid digestion & deionized water rinse) |
| Liquid Transfer Method | Vacuum-assisted non-contact transfer |
| Residual Volume | <0.5% |
| Data Logging | Real-time parameter recording with timestamped audit trail |
| Compliance Support | Designed to meet requirements of GBZ/T 192.4–2018, ISO 13797:2021 (Determination of respirable crystalline silica), and GLP-aligned documentation practices |
| User Interface | 7-inch high-resolution color touchscreen |
| Safety Features | Interlocked access door, integrated silent fume extraction (ductable to lab hood), active cooling, auto-drying function |
| Expandability | Modular architecture supports future integration of alternative digestion modules |
| Firmware Update | USB flash drive–based update protocol |
| Consumables | Standardized 50 mL high-purity quartz or ceramic crucibles (900 °C rated) |
| Brand | AMAE |
|---|---|
| Origin | Guangdong, China |
| Model | AM-1210 |
| Display | 7-inch high-resolution color touchscreen |
| Sample throughput | 5 parallel channels |
| Temperature control accuracy | ±1 °C (resolution: 0.1 °C) |
| Integrated process | automated digestion, liquid transfer, dilution, acid/water washing, vacuum filtration |
| Compliance | designed for ASTM D7521 (determination of free silica by pyrophosphoric acid method), ISO 13791, and OSHA Method ID-142 |
| Software audit trail | GLP-compliant event logging with timestamped operator actions |
| Power supply | 220 V AC, 50/60 Hz |
| Brand | AMAE |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | AM-1860 |
| Pricing | Upon Request |
| Dispensing Range | 0.5–10.0 mL |
| Dispensing Resolution | 0.1 mL |
| Display | High-Resolution Rotating Touchscreen |
| Dispensing Channels | 3 Independent Programmable Channels |
| Bottle Compatibility | Interchangeable Sample Vial Adapters (250 mL, 500 mL, 1 L) |
| pH-Based Dosage Logic | Embedded Algorithm per HJ 494–2009 & GB/T 5750.2–2023 |
| Calibration Mode | User-Adjustable Compensation Function |
| Enclosure Protection | Shock-Absorbing Housing with Illuminated Viewing Window & Leak-Resistant Reservoir Bay |
| Brand | Anchor Wisdom |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | HMET Automated Enrichment System |
| Price Range | USD 7,000 – 14,000 |
| Brand | Anton Paar Quantachrome |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | FloVac |
| Pricing | Available Upon Request |
| Degassing Modes | Vacuum & Flow-through |
| Number of Ports | 6 |
| Temperature Zones | 2 (Ambient & Heated) |
| Cooling Chamber Capacity | 6 samples |
| Gas Options | User-selectable (N₂, He, etc.) |
| Flow Rate Control | Independent per port, up to 100 mL/min |
| Valve Type | Coarse + Fine adjustment |
| Sample Tube Diameters Supported | 6 mm, 9 mm, 12 mm |
| Temperature Control | Digital, ±1 °C setpoint accuracy |
| Temperature Sensor Accuracy | ±5 °C (thermocouple) |
| Dimensions (H×W×D, excl. rear fittings) | 28 cm × 36 cm × 25 cm |
| Weight | 5 kg |
| Power Input | 100–240 V AC, 50/60 Hz |
| CE Compliant | Yes |
| Brand | Anton Paar Quantachrome |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | MasterPrep |
| Pricing | Upon Request |
| Brand | Anyan Instruments |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | DGZJ5L |
| Inlet Air Temperature | Ambient–300 °C (±0.5 °C, with temperature curve memory) |
| Outlet Air Temperature | Ambient–200 °C (±0.5 °C) |
| Primary Condenser Temp | −20–30 °C (±0.5 °C) |
| Secondary Condenser Temp | −10–30 °C (±0.5 °C) |
| Duct Temperature Range | Ambient–100 °C (±0.5 °C) |
| Feed Rate | 50–5000 mL/h |
| Atomization | Centrifugal |
| Oxygen Detection Range | 0–100% vol (0.1% resolution) |
| Pressure Monitoring Range | 0–100 kPa |
| Nitrogen Flow Rate | 100 L/min (99.9% purity) |
| Airflow Regulation | 0–300 m³/h (variable-frequency blower) |
| Filtration Efficiency | ≥99.9% for particles ≥1 µm |
| Tower Dimensions | Ø800 × H1500 mm |
| Cleaning Port | 340 × 340 mm |
| Filter Recovery Unit | Ø260 × H1300 mm |
| Dual Condensers | Ø340 × H1300 mm each |
| Collection Vessels | Ø550 × H1560 mm ×2 |
| Overall Dimensions | 2000 × 1500 × 2500 mm (L×W×H) |
| Total Power | 26 kW |
| Voltage | 380 V AC, 3-phase |
| Brand | Anyan Instruments |
|---|---|
| Origin | Zhejiang, China |
| Model | SPE600 |
| Channels | 6 |
| Display | 7-inch capacitive touchscreen |
| Fluid Control | CNC-controlled peristaltic pumps |
| Flow Rate Control | Digital, stepless adjustment with real-time display |
| Pressure Mode | Positive-pressure driven |
| Column Compatibility | 1 mL, 3 mL, 6 mL, and 12 mL SPE cartridges (universal fit) |
| Valve Technology | Multi-port rotary valve manifold (no robotic arm) |
| Sample Throughput | 1–6 independent samples simultaneously |
| Safety Features | Over-pressure and over-temperature monitoring with auto-shutdown |
| Software | Graphical user interface with preloaded method library, timed operation, customizable wash protocols, audit-ready event logging |
| Construction | Corrosion-resistant fluidic path (acid/alkali/organic solvent/oxidizer compatible) |
| Dimensions & Serviceability | Modular chassis design for easy access, maintenance, and lab mobility |
| Compliance Support | GLP-compliant operation log, method traceability, user-level access control |
| Brand | ESI |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | brineFAST |
| Pricing | Available Upon Request |
| Brand | CHEMSPEED |
|---|---|
| Origin | Switzerland |
| Model | CRYSTAL POWDERDOSE |
| Weighing Resolution | 10 µg |
| Weighing Range | 1 mg – 20 g |
| Sample Vial Capacity | 7 × 30 mL storage vessels |
| Footprint | 45 cm × 54 cm × 92 cm |
| Dosing Modes | Single-to-Single, Multi-to-Single, Multi-to-Multi |
| Brand | CHEMSPEED |
|---|---|
| Origin | Switzerland |
| Model | CRYSTAL SWILE |
| Weighing Resolution | 10 µg |
| Weighing Range | 0.1 mg – 5 mg |
| Sample Vials | 5 integrated storage vessels |
| Dispensing Tip | Disposable SWIN glass capillary |
| Platform Dimensions | 45 cm × 54 cm × 92 cm |
| Brand | CHEMSPEED |
|---|---|
| Origin | Switzerland |
| Model | FLEX EP |
| Batch Capacity | 15 × 2 L (with optional 0.5 L and 1 L volumetric flasks) |
| Volumetric Accuracy | Automated final volume adjustment to flask neck |
| Solid Dispensing Accuracy | ±0.1 mg |
| Liquid Dispensing Accuracy | ±0.4 mL |
| pH Control Range | 1.0–13.0 |
| Regulatory Compliance | Fully compliant with GMP and FDA 21 CFR Part 11 requirements |
| Integration | Native LIMS connectivity via ASTM E1578-compliant interface |
| Brand | CHEMSPEED |
|---|---|
| Origin | Switzerland |
| Model | FLEX QuEChERS |
| Sample Capacity | Up to 120 samples in 10 hours |
| Vessel Compatibility | 15 mL and 50 mL Falcon tubes |
| Automation Scope | Gravimetric salt dispensing, volumetric liquid dispensing, automated centrifugation, orbital shaking |
| Compliance | Designed for GLP/GMP-aligned workflows |
| Software | Integrated Chemspeed SWING® platform with audit trail and method versioning |
| Brand | Agela |
|---|---|
| Origin | Tianjin, China |
| Model | Cleanert M96 |
| Type | 96-Well Plate-Based Solid-Phase Extraction (SPE) and Protein Precipitation Platform |
| Configuration | Benchtop, Vacuum-Driven or Positive-Pressure Assisted |
| Intended Use | High-Throughput Biological Sample Cleanup Prior to LC-MS, HPLC, or ELISA Analysis |
| Brand | ESI |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | LabStation |
| Pricing | Upon Request |
| Brand | ESI |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | TRAXStation |
| Pricing | Available Upon Request |
| Brand | EXPEC |
|---|---|
| Model | ETV 720 |
| Origin | Zhejiang, China |
| Type | Solid Direct Introduction Electrothermal Vaporization System |
| Max Temp | 3000 °C (infrared non-contact detection + PID control) |
| Sample Capacity | 40 boats |
| Motion Control | Micrometer-level precision positioning |
| Gas Flow Control | Milliliter-level accuracy |
| Automation | Fully automated sample loading, insertion, and thermal program execution |
| Compliance | Designed for ISO/IEC 17025-aligned workflows, compatible with GLP/GMP data integrity requirements |
| Brand | EURO TECH |
|---|---|
| Origin | Shanghai, China |
| Model | ET3303 |
| Sample Capacity | 12 positions (compatible with 50 mL and 200 mL glass tubes) |
| Temperature Range | Ambient to 60 °C |
| Gas Pressure Range | 0–25 psi (adjustable) |
| Endpoint Detection Options | 0.5 mL or 1.0 mL (optical sensor-based) |
| Display | 8-inch capacitive touchscreen |
| Power Supply | 220 VAC, 50 Hz |
| Dimensions (W×H×D) | 54 cm × 31 cm × 35 cm |
| Net Weight | 25 kg |
| Exhaust Duct | 5.1 cm ID × 3.0 m length included |
| Timer Range | 1–999 minutes |
| Gas Inlet Requirement | Minimum 40 psi supply pressure, regulated to ≤100 psi maximum |
| Brand | EuroTech |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | ET3301B |
| Price Range | USD 7,000 – 14,000 |
| Sample Capacity | Up to 60 positions |
| Water Bath Temperature Range | Ambient to 95 °C |
| Timer Range | 1–999 minutes |
| Gas Inlet Pressure | 60–100 psi |
| Nitrogen Flow per Nozzle | Up to 2 L/min |
| Flow Control | Digital Pressure-Regulated |
| Independent Channels | 6 |
| Display | 7-inch LCD touchscreen |
| Dimensions (W×H×D) | 54 × 31 × 35 cm |
| Net Weight | 25 kg |
| Power Supply | 230 V, 50 Hz (optional 110 V, 60 Hz) |
| Brand | EXPEC (Hangzhou Superspectra Technology Co., Ltd.) |
|---|---|
| Origin | Zhejiang, China |
| Model | EXPEC 270 |
| Dilution Range | Up to 10,000× |
| Number of Independent Channels | 6 |
| Pressure Measurement Principle | Absolute Pressure Transducers |
| Dead Volume | Minimized via Optimized Flow Path Design |
| Tubing Material | Chemically Inert, Passivated Stainless Steel |
| Optional Module | Humidification Kit for Calibration Gas |
| Control Interface | Integrated Tablet via Wi-Fi (No External PC Required) |
| Data Management | Local Storage with Label Printing Support |
| Brand | EXPEC (Puyu Technology) |
|---|---|
| Origin | Zhejiang, China |
| Model | EXPEC 271 |
| Sampling Principle | Negative-Pressure Passive Draw |
| Flow Range | 0.2–500 mL/min |
| Response Time for Instantaneous Retention | ≤60 s after threshold exceedance |
| Channel Configuration | Dual independent sampling channels |
| Standard Sampling Positions | 8 (expandable to 16) |
| Flow Path Treatment | Electropolished stainless steel with SilcoNert®/Sulfinert® inert coating and active heating (60–120 °C) |
| Compliance | Designed to meet HJ 759–2015 requirements for ambient VOC monitoring |
| Brand | EXPEC (Furui Technology) |
|---|---|
| Origin | Zhejiang, China |
| Model | EXPEC 272 |
| Sample Capacity | 16 positions standard, expandable to 48 positions (3 × 16) |
| Sample Types | Electropolished SUMMA canisters (6–30 L), gas sampling bags (Tedlar®, FlexFoil®), and crimp-top or screw-cap sampling vials |
| Flow Path | Fully inertized (SilcoNert®/Sulfinert®-treated stainless steel), heated to 110 °C ± 5 °C |
| Automation Functions | Automated leak check (pressure decay method), flow path purge & bake-out, sequence-based auto-injection |
| Compliance | Designed for EPA Method TO-14A, TO-15A, ASTM D6196, and ISO 16017-1 workflows |
| Brand | EXPEC (Puyu Technology) |
|---|---|
| Origin | Zhejiang, China |
| Model | EXPEC 273 |
| Pump Configuration | Oil-free dual-pump system (integrated diaphragm pump + molecular turbomolecular pump) |
| Compliance | EPA Method TO-14A, TO-15A, and HJ 759-2015 |
| Control Interface | External tablet via Wi-Fi (no dedicated PC required) |
| Cleaning Modes | Dry purge, humidified rinse, heated humidified rinse |
| Vacuum Performance | ≤5 mTorr base pressure |
| Throughput | Configurable for 4-position desktop station or 8-position oven-integrated station |
| Certifications | Designed for GLP-compliant laboratories |
| Brand | EXPEC (Puyu Technology) |
|---|---|
| Origin | Zhejiang, China |
| Model | EXPEC 274 |
| Canister Capacity | 1 L / 3 L / 6 L |
| Sampling Duration Range | 0.1–24 h |
| Flow Control Accuracy | ±2% of setpoint |
| Pressure Measurement Range | 0–30 psia, resolution 0.01 psi |
| Leak Check Sensitivity | ≤0.5 psi/min decay |
| Display | 5-inch capacitive touchscreen |
| Ingress Protection | IP56 |
| Particulate Filtration | ≥99.9% removal of particles <10 µm |
| Sample Path Surface Treatment | SilcoNert®- or Sulfinert®-equivalent deactivated passivation |
| Connectivity | Bluetooth 5.0 & Wi-Fi 802.11 b/g/n, compatible with EXPEC FieldSync mobile app (iOS/Android) |
| Data Logging | Internal non-volatile memory (≥10,000 records), CSV export via USB or cloud sync |
| Brand | EXPEC |
|---|---|
| Origin | Zhejiang, China |
| Model | EXPEC 510S |
| Sample Capacity Options | 9 / 16 / 36 positions |
| Heating Method | Water Bath |
| Compliance | Designed for GLP/GMP-aligned sample prep workflows |
| Brand | EXPEC |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | EXPEC 520 |
| Pricing | Available Upon Request |
| Brand | EXPEC (Puyu Technology) |
|---|---|
| Origin | Zhejiang, China |
| Model | EXPEC 530 |
| Capacity | 12-position parallel processing |
| Endpoint Detection | Auto-sensing nitrogen blowdown termination |
| Final Volume Options | 0.5 mL or 1.0 mL (user-selectable) |
| Visual Monitoring | Triple-sided tempered glass viewport with integrated LED illumination |
| Sample Tube Compatibility | 80 mL and 300 mL tubes |
| Optional Feature | Wall-rinse module for solvent-assisted recovery enhancement |
| Safety Design | Fully enclosed water bath chamber with internal exhaust fan and dedicated vent ducting |