- All
- Favorite
- Popular
- Most rated
| Brand | ACCRETECH (Tokyo Seimitsu) |
|---|---|
| Origin | Japan |
| Model | Rondcom 65B |
| Rotation Accuracy (Radial) | (0.01 + 4H/10,000) µm per JIS B 7451:1997 |
| Axial Accuracy | (0.03 + 4R/10,000) µm per JIS B 7451:1997 |
| Straightness (Z-axis, narrow range) | 0.05 µm/100 mm |
| Straightness (Z-axis, full range) | 0.2 µm/500 mm |
| Parallelism (Z-axis) | 1.5 µm/500 mm |
| Stylus Force | 30–100 mN (stepless adjustment) |
| Max Workpiece Diameter | φ68 mm |
| Max Height | 7800 mm |
| R-axis Travel | 220 mm |
| Z-axis Travel | 500 mm |
| Table Load Capacity | 60 kg |
| Power Supply | AC 100–240 V ±10%, 50/60 Hz |
| Air Supply | 0.5–0.7 MPa, consumption 49 NL/min |
| Brand | Accretech |
|---|---|
| Origin | Japan |
| Model | Rondcom 47B |
| Maximum Workpiece Diameter | Ø350 mm |
| Maximum Table Diameter | Ø600 mm |
| Maximum Workpiece Mass | 60 kg |
| Measurement Range | ±1000 µm |
| Sensor Stroke | Adjustable |
| Stylus Load Control | Yes |
| Safety Stop Function | Integrated Overload Protection |
| Column Height | High-Column Configuration for Large/low-volume Parts |
| Brand | Accretech |
|---|---|
| Origin | Japan |
| Model | R73A |
| Bearing Type | Air-bearing spindle |
| Measurement Principle | Radius method with rotating sensor table |
| Z-axis Travel | 1000 mm |
| Radial (R-axis) Auto-zero Function | Yes |
| Tilt & Centering | Fully automated mechanical + software-based correction |
| Air-bearing Pressure Monitoring | Integrated diagnostic circuit |
| Magnification Settings | 8-step selectable (50× to 10,000×) |
| Software Platform | ACCTee Measurement Suite |
| Compliance Framework | Designed for ISO 1101, ISO 12181 (Roundness), ISO 12180 (Cylindricity), and ASTM E1155 (Straightness) |
| Brand | Accretech (Tokyo Seimitsu) |
|---|---|
| Origin | Japan |
| Model | NEX |
| Type | Contact Profilometer / Surface Roughness Tester |
| Drive System | Patented Linear Motor-Based X-Axis Drive |
| Measurement Principle | Stylus-Based Profile Tracing with High-Resolution Vertical Displacement Sensing |
| Compliance | Designed for ISO 25178, ISO 4287, ISO 11562, ASME B46.1, and JIS B 0601 Standards |
| Software Platform | SURFCOM Data Analysis Suite with GLP/GMP-Ready Audit Trail (FDA 21 CFR Part 11 Optional) |
| Configuration | Integrated All-in-One Benchtop System (DX or SD variants) |
| Environmental Robustness | Vibration-Isolated Base with Optional PC Enclosure in Anti-Vibration Substructure |
| Brand | Accretech |
|---|---|
| Origin | Japan |
| Model | SURFCOM NEX 001 |
| Type | Contact Profilometer / Surface Roughness Tester |
| Drive System | Patented High-Precision Linear Motor |
| Temperature Compensation Range | 20 °C ± 5 °C |
| Maintenance | Oil-free, Lubrication-Free Drive Mechanism |
| Compliance | Designed for ISO 25178, ISO 4287, ISO 4288, ASME B46.1, JIS B 0601, and GLP/GMP-aligned metrology workflows |
| Brand | Accretech |
|---|---|
| Origin | Japan |
| Model | Rondcom GRANDE DUO / GRANDE |
| Measurement Principle | Rotating Table (Workpiece Rotation) with High-Precision Air Bearing Spindle |
| Maximum Workpiece Weight | Up to 2,000 kg (GRANDE DUO), Up to 3,000 kg (GRANDE) |
| Maximum Workpiece Diameter | Ø1,200 mm (DUO), Ø1,500 mm (GRANDE) |
| Vertical Measurement Height | 1,000 mm (DUO), 1,200 mm (GRANDE) |
| Radial Resolution | ≤ 0.01 µm |
| Axial Resolution | ≤ 0.05 µm |
| R-Axis Travel Range | 0–600 mm (motorized, continuous radial positioning) |
| Spindle Runout | < 0.02 µm (TIR, at measurement radius) |
| Compliance | ISO 1101, ISO 12181-1/-2, ISO 12180-1/-2, ASME Y14.5, JIS B 0621 |
| Brand | Accretech |
|---|---|
| Origin | Japan |
| Model | NEX |
| Measurement Principle | Precision Rotational Axis Metrology with High-Accuracy Spindle & Dual-Position Angular Sampling |
| Positional Accuracy | (0.02 + 3.2H/10,000) µm |
| Compliance | ISO 1101, ISO 12181 (Roundness), ISO 12180 (Cylindricity), ASME Y14.5 |
| Brand | Accretech |
|---|---|
| Origin | Japan |
| Model | NEX Rs |
| Sensor Mount Type | Patented Offset-Type Holder |
| Measurement Mode Switching | Mechanical Flip Mechanism for OD/Top-Surface Transition |
| Software Platform | ACCTee Integrated Metrology Analysis Suite |
| Compliance Framework | Designed for ISO 1101, ISO 12181 (Roundness), ISO 12180 (Cylindricity), and ASME Y14.5 Geometric Dimensioning and Tolerancing (GD&T) workflows |
| Data Management | Native support for audit-trail-enabled measurement file archiving (compatible with GLP/GMP documentation requirements) |
| Brand | NCS (China Iron and Steel Research Institute Group) |
|---|---|
| Origin | China |
| Manufacturer Type | Authorized Distributor |
| Model | Pure Iron Flux |
| Pricing | Available Upon Request |
| Brand | Accretech |
|---|---|
| Origin | Japan |
| Model | Rondcom 65A-LH |
| Maximum Workpiece Weight | 250 kg |
| Maximum Measurable Diameter | Φ580 mm |
| Maximum Measurable Height | 900 mm (Standard Configuration) |
| Type | Imported High-Precision Rotational Metrology System |
| Compliance | Designed for ISO 1101, ISO 5436-1, and ASME Y14.5 geometric tolerance evaluation |
| Brand | Thermo Fisher |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Thermo Scientific™ Glacios™ |
| Price Range | USD $2.5M–$3.8M (FOB) |
| Accelerating Voltage | 80–200 kV |
| Magnification | Up to 10,000,000× |
| Electron Source | 200 kV X-FEG (Cold Field Emission Gun) |
| Automation | Integrated Autoloader with cryo-transfer compatibility |
| Software Platform | EPU v3.x for Single-Particle Analysis (SPA) |
| Detector Compatibility | Supports Direct Electron Detectors (e.g., Falcon 4, Gatan K3) and Volta Phase Plate (VPP) |
| Footprint | < 8 m² (including service access) |
Show next