Solid Phase Extraction Instrument
Filter
Showing 31–44 of 44 results
| Brand | KEZHE SHANGHAI |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | GOODSPE-6000 |
| Automation Level | Fully Automatic |
| Channel Count | 6 parallel channels |
| Extraction Mode | Column-based and disk-based SPE |
| Flow Rate Control | 0.1–120 mL/min |
| Solvent Selection | Up to 5 independently programmable solvents |
| Sample Capacity | 6 samples simultaneously |
| Sample Load Volume | 20 mL – 20 L |
| Elution Pump | Dual syringe pump (10 mL liquid + 10 mL air) |
| Contact Materials | PTFE and borosilicate glass |
| Pressure Source | Regulated air supply (0–30 psi / 0–1.4 bar output |
| Valve Type | Non-metallic 12-position rotary valve |
| Waste Separation | Dedicated aqueous and organic waste lines |
| Compliance | EPA Method-compliant for water analysis (e.g., EPA 508, 525.3, 537, 8270) |
| Brand | KEZHE SHANGHAI |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | GOODSPE-80 |
| Automation Level | Fully Automatic |
| Number of Channels | 8 |
| Extraction Mode | Column-Based SPE |
| Flow Rate Control Range | 0.01–15 mL/min |
| Solvent Selection | Up to 4 independent solvent lines |
| Sample Capacity | Simultaneous processing of up to 8 samples |
| Sample Loading Volume | 1–30 mL per channel |
| Wetted Materials | Stainless steel (316), PTFE, borosilicate glass, PEEK |
| Brand | KEZHE Shanghai |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Country of Origin | China |
| Model | GOODSPE-8600 |
| Automation Level | Fully Automated |
| Number of Channels | 6 (configurable from 2 to 10) |
| SPE Format Compatibility | Cartridge & Disk (Column-Membrane Universal) |
| Flow Rate Range | 0.1–100 mL/min per channel |
| Solvent Selection | 8 independent solvent channels with multi-position valve switching |
| Sample Capacity | Up to 72 samples per batch |
| Sample Loading Volume | 1–80 mL (standard) |
| Elution Fraction Volumes | 20 mL or 80 mL (customizable) |
| Wetting/Soak Function | Yes |
| Sequential Column Stacking (Tandem SPE) | Yes |
| Solvent Contact Materials | PTFE (Teflon®), Borosilicate Glass |
| Waste Management | 3 independent waste lines (organic, aqueous, acidic) |
| Positioning Accuracy | ±0.1 mm |
| Liquid Handling Accuracy | ≥99% |
| Power Supply | 100–240 VAC, 50/60 Hz |
| Software Interface | Windows-based GUI with real-time status monitoring, method error detection, audit-trail-enabled logging, and Wi-Fi connectivity |
| Brand | KEZHE SHANGHAI |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Domestic |
| Model | SpeedMembrand-10 |
| Automation Level | Fully Automatic |
| Channel Configuration | Multi-channel (1/4/6/8 selectable) |
| Extraction Method | Membrane-based Solid Phase Extraction (SPE) |
| Flow Rate Range | 0–200 mL/min |
| Sample Volume Capacity | >2 L |
| Available Membrane Diameters | 47 mm, 50 mm, 90 mm |
| Compatibility | Designed for integration with KEZHE’s fully automated SPE systems |
| Material in Contact with Solvents | Chemically resistant polymer housing and fluidic path (e.g., PTFE, PEEK, or equivalent inert materials per standard SPE accessory design) |
| Structural Flexibility | Modular channel expansion/reduction capability |
| Dual-mode Support | Compatible with both cartridge-based and disk-type membrane SPE formats |
| Brand | LabTech |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PrepElite-GV |
| Automation Level | Fully Automated |
| Channel Configuration | Multi-channel |
| Extraction Mode | Column-based Solid Phase Extraction (SPE) |
| Flow Rate Control | Intelligent Precision Flow Control (0.1–100 mL/min) |
| Compatible Eluents | Multiple Organic Solvents (e.g., Methanol, Acetonitrile, Dichloromethane, Hexane) |
| Sample Capacity | Up to 96 Samples per Batch |
| Sample Loading Volume | 0.1–1000 mL (method-dependent) |
| Wetted Materials | Chemically Resistant Components (PTFE, 316L Stainless Steel) |
| Brand | LabTech |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PrepElite-SV |
| Automation Level | Fully Automatic |
| Channel Configuration | Multi-channel (up to 24-position SPE + dual-concentration modules) |
| Extraction Mode | Column-based Solid Phase Extraction (SPE) |
| Flow Rate Control | 0–120 mL/min (programmable, pressure-stabilized) |
| Solvent Selection | 8 independent solvent reservoirs with auto-switching capability |
| Sample Capacity | 124 positions (compatible with 12×10 rack + optional expansion) |
| Sample Loading Volume | 1–6 mL per vial |
| Wetted Materials | Borosilicate glass, PTFE, and chemically inert stainless steel (316L) |
| Brand | LabTech |
|---|---|
| Origin | Beijing, China |
| Model | Sepaths UP |
| Automation Level | Fully Automated |
| Channel Count | Multi-Channel |
| Extraction Type | Membrane-Based SPE |
| Flow Rate Control | 0–120 mL/min |
| Solvent Selection | 8 Independent Solvent Lines |
| Sample Capacity | Up to 12 Samples Simultaneously |
| Sample Loading Volume | 1–20 mL |
| Wetted Materials | PTFE and Stainless Steel |
| Brand | PerkinElmer |
|---|---|
| Origin | USA |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Origin | Imported |
| Model | QSight SP50 |
| Automation Level | Fully Automated |
| Channel Configuration | Multi-Channel |
| Extraction Format | Cartridge-Based SPE |
| Solvent Delivery Architecture | High-Pressure, Flow-Controlled Solvent Distribution |
| Brand | Agela |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | SPE-40 |
| Automation Level | Fully Automatic |
| Number of Channels | 4 Parallel Channels |
| Extraction Format | Cartridge-Based SPE |
| Flow Rate Control Range | 0.1–30 mL/min |
| Solvent Selection | Up to 5 Different Solvents |
| Sample Capacity | 4 Samples Simultaneously |
| Sample Loading Volume | 1–30 mL (Expandable up to 5000 mL) |
| Wetted Materials | Alumina Ceramic, PTFE, PEEK |
| Brand | Raykol |
|---|---|
| Origin | Fujian, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Country of Origin | China |
| Model | SPEVA |
| Automation Level | Fully Automated |
| Number of Channels | 8 Parallel Channels |
| Extraction Format | Cartridge-Based SPE |
| Flow Rate Control | 0.1–100 mL/min |
| Solvent Selection | Up to 6 Independent Solvent Reservoirs |
| Sample Capacity | 80 Positions |
| Sample Loading Volume | 0.1 mL to Unlimited |
| Wetted Materials | PTFE, Polypropylene (PP), PEEK |
| Brand | Scienhome |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | WSE |
| Automation Level | Semi-Automatic |
| Number of Channels | Multi-Channel (4 Parallel Sample Positions) |
| Extraction Mode | Dispersive SPE (dSPE) |
| Flow Rate Control | Up to 30 mL/min |
| Solvent Selection Ports | 5 Independent Solvent Lines |
| Maximum Sample Volume per Channel | 30 mL |
| Wetted Materials | Chemically Resistant PTFE, Borosilicate Glass, and SPE-Compatible Polymers |
| Compliance | Designed for GLP-compliant workflows in regulated laboratories |
| Brand | Sineo |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | SPE100 / SPE200 / SPE400 |
| Automation Level | Fully Automated |
| Channel Count | 1 / 2 / 4 Independent Channels |
| Extraction Mode | Cartridge-Based (Column) SPE |
| Flow Rate Control | 0.1–120 mL/min |
| Solvent Capacity | 8 Solvent Types, Each in 500 mL Independent Bottles |
| Sample Loading Volume | 0.1 mL – 20 L |
| Column Compatibility | 1 mL, 3 mL, 6 mL, 12 mL Standard SPE Cartridges |
| Sealing Technology | Patented Pan-Seal Cap Coupling with H-Axis Compression |
| Pressure Range | 0–145 psi (with Adjustable Pressure Threshold & Overpressure Alarm) |
| Mechanical Arm | X/Y/Z/H Four-Axis Robotic Arm (Positioning Accuracy: ±0.01 mm |
| Sample Needle | 316L Stainless Steel with Liquid-Level Tracking & Puncture Sampling |
| Integrated Functions | On-line Drying (N₂ Blow-Down + Anhydrous Na₂SO₄), On-line Concentration (N₂-Assisted), Waste Segregation (3-Channel Effluent Routing), Multi-Mode Needle Cleaning (N₂ Purge, Solvent Rinse, Agitated Rinse) |
| Software | Cloud-Enabled Platform with Remote Monitoring, Scheduled Run Initiation, Audit Trail, Parameter Validation & GLP-Compliant Logging |
| Power Supply | AC 220 V / 110 V ±10%, 50–60 Hz |
| Operating Environment | 0–40 °C, 10–85% RH |
| Dimensions (Main Unit) | 680 × 580 × 670 mm (H×W×D) |
| Brand | TECAN |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model No. | 253-0014 |
| Channel Count | Multi-channel |
| Extraction Format | Cartridge-based SPE |
| Flow Rate Control | 0.1–100 mL/min |
| Solvent Selection | Up to 11 independent solvent lines |
| Sample Capacity | 48 samples per run |
| Sample Loading Volume | ≤80 mL per sample |
| Wetted Materials | PTFE, Polypropylene (PP), Stainless Steel (316) |
| Brand | Thermo Fisher |
|---|---|
| Origin | USA |
| Manufacturer | Thermo Fisher Scientific |
| Origin Category | Imported |
| Model | AutoTrace 280 |
| Automation Level | Fully Automated |
| Channel Count | 6-Channel |
| Extraction Format | Cartridge-Based SPE (with optional 47 mm disk support) |
| Solvent Selection | 5 Solvents (automated selection for conditioning, washing, elution) |
| Sample Volume Range | 20 mL – 20 L |
| Compatible SPE Formats | 1 mL, 3 mL, 6 mL cartridges and 47 mm SPE disks |
| Dual-Cartridge Mode | Supported |
| Waste Management | Separate aqueous/organic waste lines |
| Valve Material | PEEK rotary 12-port valve (acid/base compatible) |
| Software | AutoTrace 280 Control Software (24 user methods onboard |
| Regulatory Alignment | EPA-compliant for water analysis (e.g., EPA Methods 508.1, 525.3, 549.2, 625.1) |
| Power | 100–240 VAC, 47–63 Hz, ≤150 VA |
| Dimensions (H×W×D) | 57 × 63.5 × 69 cm |
| Weight | 68.1 kg |
| Air Pressure | 0–30 psi (0–1.4 bar) output |
| Pump Accuracy | ±2.5% |
| Fluid Path Materials | Stainless steel tubing, TFE, Kynar®, ceramic pistons, Rulon® valve seals |
| Exclusion | Acetic acid and acetone not recommended |