Spectroscopy Instrument Parts
Filter
Showing 1–30 of 80 results
| Brand | Agilent Technologies |
|---|---|
| Origin | Malaysia |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Origin Category | Imported |
| Model | ADS 2 |
| Pricing | Available upon Request |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model Variants | LARRY, LARRY-PC, LARRY-USB |
| Pricing | Upon Request |
| Brand | Andor |
|---|---|
| Origin | United Kingdom |
| Model | DV-420A-BV |
| Spectral Range | 300–1000 nm |
| Pixel Array | 1024 × 256 |
| Pixel Size | 26 × 26 µm |
| Imaging Area | 26.6 × 6.7 mm |
| Peak Quantum Efficiency | 95% |
| Maximum Cooling Temperature | −75 °C |
| Full Well Capacity (typ.) | 510 k e⁻ |
| Register Capacity (typ.) | 1 M e⁻ |
| Maximum Spectral Acquisition Rate | 75 spectra/s |
| Read Noise (typ.) | 4 e⁻ |
| Readout Speeds | 0.1 / 0.05 / 0.033 MHz |
| ADC Resolution | 16-bit |
| Dark Current (@−70 °C) | 0.002 e⁻/pixel/s |
| Interface | USB 2.0 |
| Vacuum Packaging | Andor UltraVac™ |
| Cleanroom Assembly | ISO Class 4 (10,000) |
| Compliance | CE, RoHS |
| Brand | Andor |
|---|---|
| Origin | United Kingdom |
| Detector Types | PMT (185–900 nm), Si Photodiode (200–1100 nm), InGaAs (800–1900 nm), PbS (800–2900 nm), InSb (1–5.5 µm), MCT (2–12 µm) |
| Power Supply | High-Voltage PMT Driver |
| Data Acquisition | Single-Photon Counting Module & Analog Digitizer |
| Accessories | Sample Chambers, Filter Wheels, Fiber-Optic Coupling Kits |
| Brand | Andor |
|---|---|
| Origin | United Kingdom |
| Model | Solis |
| Operating Systems | Windows Vista/7/8/10 (32-bit & 64-bit) |
| Development Interfaces | C/C++, C#, VB6, LabVIEW, MATLAB, Linux-compatible SDK |
| Compatible Hardware | Andor CCD/EMCCD/sCMOS cameras, spectrographs, motorized stages, filter wheels, shutters |
| Integration Support | µ-Manager plugin architecture |
| Brand | Applied Photophysics |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Hellma |
| Price Range | USD 1,850 – 4,300 |
| Brand | ARS |
|---|---|
| Origin | USA |
| Model | Displex Series |
| Type | Two-Stage & Single-Stage Cryocoolers |
| Cooling Principle | Gifford-McMahon (GM) Cycle |
| Operating Voltage | 110 V / 60 Hz (performance reduced ~20% at 220 V / 50 Hz) |
| Compliance | Designed for integration with spectroscopic, magneto-optical, and quantum transport measurement systems |
| Key | Two-stage models reach ≤4.2 K |
| Key | Refrigeration power ranges from 40 mW @ 2 K (DE-202-1.7) to 210 W @ 150 K (DE-110) |
| Key | Typical base temperature stability: ±10 mK over 24 h (with optional PID-controlled heater & calibrated RuO₂ sensor) |
| Key | Vacuum-compatible stainless-steel cold head, all-metal seals, ISO-KF 63 vacuum flange standard |
| Key | Integrated temperature controller with 4-wire RTD/RuO₂ input, programmable ramp rates, and setpoint hold function |
| Brand | ARS |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Helitran Series |
| Pricing | Available Upon Request |
| Temperature Range | 2 K – 350 K (with He-4) or 77 K – 350 K (with LN₂) |
| Cooling Method | Open-cycle helium or liquid nitrogen cryogen flow |
| Control System | Integrated temperature sensor and resistive heater subsystem |
| Vacuum Enclosure | Included with radiation shield |
| Sample Mounting | Modular sample stage options available |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | AS-500 |
| Pricing | Available Upon Request |
| Brand | East & West Analytical Instruments |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | OEM Manufacturer |
| Country of Origin | China |
| Model | AS-600 |
| Pricing | Upon Request |
| Brand | ESI |
|---|---|
| Model | AutoBench |
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Pricing | Upon Request |
| Brand | AZ Technology |
|---|---|
| Origin | USA |
| Model | LPSR300 |
| Spectral Range | 250–2800 nm |
| Measurement Type | Spectral Total Hemispherical Reflectance |
| Repeatability | ±1% (250–2500 nm), ±2% (2500–2800 nm) |
| Spectral Resolution | Better than 5% of wavelength (250–2500 nm), better than 8% of wavelength (2500–2800 nm) |
| Sample Diameter | ≥0.5 inch |
| Full Scan Time | <2 minutes |
| Power Supply | 115 VAC / 60 Hz |
| Measurement Head Dimensions | 10 × 12 × 8 in |
| Measurement Head Weight | 15 lb |
| PC/Power Box Dimensions | 9 × 16 × 20 in |
| PC/Power Box Weight | 35 lb |
| Warranty | 1 year parts and labor |
| Compliance | ASTM E903, NASA-qualified design |
| Operating System | Windows XP (embedded) |
| Integrated Optical Database | Yes |
| Vacuum-Compatible Variant | LPSR300V available |
| Brand | AZ Technology |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | SPECTRAFIRE |
| Pricing | Available Upon Request |
| Spectral Range | 2.5–40 µm (4000–250 cm⁻¹) |
| Spectral Resolution | 0.5–32 cm⁻¹ |
| Sample Diameter Requirement | ≥8.3 mm |
| Footprint (FTIR + SPECTRAFIRE) | 33 × 25 in |
| Height at Sample Port | 13.5 in |
| Electrical Requirement | 120 VAC, 60 Hz |
| Warranty | 1 year parts and labor |
| Brand | Bio-Logic |
|---|---|
| Origin | France |
| Model | SFM-3000 |
| Number of Syringes | 3 |
| Drive Mechanism | Stepper Motor per Syringe |
| Minimum Dead Time | 0.25 ms (microcell) / 0.6 ms (FC-08 cell) |
| Flow Rate Range | 0.01–10 mL/s |
| Mixing Ratio Range | 1:1 to 1:100 (continuously adjustable) |
| Temperature Control | Jacketed Cell with External Circulator |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Origin | Domestic (PRC) |
| Model | CCD Interface Flange |
| Pricing | Available Upon Request |
| Brand | ESI |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | EdibleOil ICP |
| Pricing | Available Upon Request |
| Brand | GBC |
|---|---|
| Origin | Australia |
| Model | Argon Humidifier |
| Application | In-line humidification of argon carrier gas for ICP-OES/ICP-MS sample introduction systems |
| Compliance | Designed for integration with ISO/IEC 17025-compliant analytical workflows |
| Regulatory Context | Supports GLP/GMP-aligned sample introduction stability in high-salinity matrix analysis |
| Brand | GBC |
|---|---|
| Origin | Australia |
| Model | FS3000 |
| Sample Capacity | 10 calibration standards + 60 sample positions |
| Dedicated Vial Locations | rinse solution, blank solution, and recalibration standard |
| Programmable Parameters | measurement interval, pre-measurement delay, wash cycle duration, recalibration frequency, restandardization frequency, number of calibration standards, replicate count per sample, first/last sample position indexing |
| Distribution Status | Authorized International Distributor (Imported Equipment) |
| Brand | GBC |
|---|---|
| Origin | Australia |
| Model | HG3000 |
| Type | Continuous-flow hydride generation system for atomic absorption and atomic fluorescence spectroscopy |
| Compatible Elements | As, Sb, Bi, Ge, Pb, Se, Te, Sn, Hg (via cold vapor mode) |
| Detection Capability | Sub-ppb (ng/L) level for all supported elements |
| Sample Throughput | Up to 60 samples/h (triplicate readings) |
| Operating Principle | Acid–sodium borohydride (NaBH₄) reduction in laminar-flow segmented manifold |
| Compliance | Designed to meet ISO/IEC 17025 method validation requirements |
| Brand | GBC |
|---|---|
| Origin | Australia |
| Model | HG3000PII |
| Type | Continuous-Flow Hydride Generation System |
| Sample Throughput | Up to 60 samples/h |
| Detection Capability | Sub-ppt for As, Bi, Sn, Sb, Te, Se, and Hg |
| Construction | Precision Borosilicate Glass Reaction Manifold |
| Flow Architecture | Segmented Gas-Liquid Flow with Integrated Phase Separation |
| Brand | GBC |
|---|---|
| Origin | Australia |
| Model | PS720 |
| Type | Automated Dilution Module for Atomic Absorption Spectroscopy |
| Integration | Designed exclusively for use with GBC SDS720 Autosampler and SavantAA Software |
| Control Interface | Fully integrated via SavantAA v5.0+ |
| Compatibility | Flame AAS (FAAS) and Hydride Generation AAS (HGAAS) |
| Automation Scope | Full dilution, standard addition, internal standard recovery, and up to two chemical modifier additions |
| Mechanical Integration | Synchronized with GBC’s motorized burner head rotation system for extended linear dynamic range |
| Brand | GBC |
|---|---|
| Origin | Australia |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | SDS720 |
| Pricing | Available Upon Request |
| Sample Capacity | 360 positions (standard), expandable to 720 |
| Vial Compatibility | 240 × 14 mL vials + 10 × 50 mL standard vials |
| Fluid Path Materials | PTFE and PEEK only (metal-free) |
| Cleaning System | Peristaltic-pump-driven continuous-flow probe wash station |
| Overflow Protection | Fixed overflow tray |
| Instrument Compatibility | GBC XplorAA, SensAA, SavantAA AAS |
| Control Interface | PC-based software with programmable wash time, delay time, replicate injection count, recalibration interval, restandardization cycle, measurement duration, and sequence logic |
| Sampling Mode | Fully random-access sampling |
| Brand | GBC |
|---|---|
| Origin | Australia |
| Model | System5000 |
| Detection Limit | Sub-ppb for ~50 elements |
| Temperature Range | Up to 3000 °C |
| Sample Volume | 1–100 µL (1 µL increment) |
| Autosampler Capacity | 40 samples + 10 standards |
| Vial Sizes | 2 mL (samples/standards), 5 mL (auto-dilution), 10 mL (reagents/blanks) |
| Graphite Tube | Platform-equipped high-performance tube |
| Gas Control | Programmable purge gas selection (Ar, N₂, or mixed) |
| Chemical Modifier Injection | Dual-channel, software-triggered |
| Syringe Material | Fully PTFE capillary |
| Wash Reservoir | 1 L |
| Brand | Hamamatsu |
|---|---|
| Origin | Japan |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Origin | Imported |
| Model | S11510-1106 |
| Price Range | USD 0–9,999 |
| Origin | UK |
|---|---|
| Distribution Model | Authorized Distributor |
| Import Status | Imported |
| Models | IRA-256, IRA-512 |
| Interface Options | USB 14-bit, PCI 12-bit |
| Pixel Count | 256 or 512 |
| Pixel Size | 50 µm × 500 µm |
| Pixel Pitch | 50 µm |
| Spectral Range | 800–1700 nm |
| Cooling Method | TE (Peltier) |
| Operating Chip Temperature | < +5 °C (at 24 °C ambient) |
| Full Well Capacity (typ.) | 5×10⁶ e⁻ (high-sensitivity mode), 130×10⁶ e⁻ (high-dynamic-range mode) |
| Read Noise (rms, typ.) | 800 e⁻ (HS), 10 k e⁻ (HDR) |
| Dark Current (rms, typ.) | 190 k e⁻/s (IRA-256), 182.2 k e⁻/s (IRA-512) |
| 1-s Dark Noise (rms, typ.) | 436 e⁻ (IRA-256), 426 e⁻ (IRA-512) |
| Integration Time | 0.01–10 s |
| Analog Output Range | 0–10 V |
| Frame Rate (real-time) | >20 spectra/s |
| Defective Pixel Count | ≤5 (non-adjacent) for IRA-512 |
| Brand | Hamamatsu |
|---|---|
| Origin | Japan |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Origin | Imported |
| Model | H |
| Pricing | Available Upon Request |
| Origin | Beijing |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Domestic (China) |
| Model | HG-01 |
| Pricing | Upon Request |
| Brand | HORIBA |
|---|---|
| Origin | France |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Import Status | Imported |
| Model | Gold-Coated Grating |
| Pricing | Upon Request |
| Type | Replica and Master Grating |
| Maximum Size | 1450 × 700 mm |
| Spectral Range | 600–1600 nm |
| Optimized Wavelengths | 800 nm, 1053 nm, 1550 nm |
| Groove Density | 1200, 1480, 1740 grooves/mm |
| Diffraction Efficiency | 90–95% |
| Substrate Materials | Fused Silica, Heat-Resistant Glass, ULE®, Zerodur®, Metal |
| Coating | High-Purity Gold (Au) |
| Brand | HORIBA |
|---|---|
| Origin | France |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Imported |
| Model | OEM Volume-Production Grating |
| Pricing | Available Upon Request |