Spray Dryers
Filter
Showing all 23 results
| Brand | Anyan Instruments |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | 8000Y |
| Sample Compatibility | Aqueous & organic solutions, emulsions, suspensions |
| Max Feed Volume | 2000 mL |
| Inlet Temperature Range | 30–300 °C |
| Outlet Temperature Range | 30–200 °C |
| Evaporation Capacity | 1500–2000 mL/h |
| Drying Time | 0.8–1.0 s |
| Temperature Control Accuracy | ±0.5 °C (PID) |
| Nozzle Orifice Options | 0.5 / 0.75 / 1.0 / 1.5 / 2.0 mm |
| Power Supply | 3.8 kW / 220 V |
| Dimensions (H×L×W) | 1380 × 770 × 590 mm |
| Noise Level | <60 dB(A) |
| Material | 316L stainless steel frame + borosilicate glass drying chamber & collection system |
| Brand | Anyan Instruments |
|---|---|
| Origin | Zhejiang, China |
| Model | AYAN-3000YL |
| Max Feed Rate | 3000 mL/h |
| Inlet Temperature Range | Ambient to 250 °C (electric heating) |
| Outlet Temperature Control | PID-regulated, ±1 °C accuracy |
| 雾化方� | �: Two-fluid pneumatic nozzle (optional centrifugal atomizer) |
| Drying Chamber Diameter | 600 mm |
| Airflow | 240 m³/h |
| Heating Power | 7 kW |
| Total Power Consumption | 10 kW |
| Construction Material | 304 stainless steel (wetted parts) |
| Noise Level | <60 dB(A) |
| Integrated Oil-Free Compressor | Yes |
| Touchscreen Interface | 7-inch color LCD, bilingual (English/Chinese) |
| Safety Features | Leakage protection, voltage stabilization, thermal insulation, inlet air filtration, automatic nozzle cleaning (needle-type unclogging system) |
| Optional Accessories | Magnetic stirrer, peristaltic feed pump (adjustable), water-cooled atomizer head |
| Brand | ANYAN (Hangzhou Anyan Instrument Co., Ltd.) |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | CY-8000Y |
| Sample Types | Emulsions, Suspensions |
| Max Feed Rate | 20–2000 mL/h (dependent on solids content) |
| Inlet Temp Range | 30–400 °C |
| Outlet Temp Range | 30–200 °C |
| Evaporation Capacity | 1500–2000 mL/h |
| Minimum Feed Volume | 50 mL |
| Nozzle Orifice Options | 0.5 / 0.7 / 0.75 / 1.0 / 1.5 / 2.0 mm |
| Temperature Control Accuracy | ±0.5 °C (PID-regulated) |
| Average Drying Time | 0.8–1.0 s |
| Power Supply | 3.8 kW / 220 V |
| Dimensions (H×L×W) | 1380 × 770 × 590 mm |
| Noise Level | <60 dB(A) |
| Construction | 316L stainless steel frame + borosilicate glass drying chamber, cyclone, and collection vessel |
| Brand | ANYAN (Hangzhou Anyan Instrument Co., Ltd.) |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | CY-8000Y |
| Sample Types | Emulsions, Suspensions |
| Max. Feed Rate | 20–2000 mL/h (dependent on solids content) |
| Inlet Air Temperature Range | 30–400 °C |
| Outlet Air Temperature Range | 30–200 °C |
| Evaporation Capacity | 1500–2000 mL/h |
| Drying Time | 0.8–1.0 s |
| Temperature Control Accuracy | ±0.5 °C (PID real-time regulation) |
| Nozzle Orifice Options | 0.5, 0.7, 0.75, 1.0, 1.5, 2.0 mm |
| Power Supply | 3.8 kW / 220 V |
| Dimensions (H×L×W) | 1380 × 770 × 590 mm |
| Noise Level | <60 dB(A) |
| Material | 316L stainless steel frame & fluid path |
| Brand | ANYAN (Hangzhou Anyan Instrument Co., Ltd.) |
|---|---|
| Origin | Zhejiang, China |
| Model | CY-8000YT |
| Sample Compatibility | Aqueous & organic solvent-based solutions, suspensions, emulsions |
| Max. Feed Rate | 20–1000 mL/h (rated capacity: 1500 mL/h) |
| Temperature Range | 0–250 °C |
| Vacuum Range | −0.05 to −0.06 MPa |
| Heating Control Accuracy | ±1 °C (PID-regulated) |
| Nozzle Orifices | 0.7, 1.0, 1.5, 2.0 mm (interchangeable) |
| Minimum Sample Volume | 50 mL |
| Power Supply | 5.8 kW / 380 V |
| Dimensions (W×D×H) | 850 × 1000 × 1650 mm |
| Particle Size Distribution | Normal (Gaussian), optimized for flowability and reconstitution |
| Brand | AnYuJie |
|---|---|
| Origin | Zhejiang, China |
| Model | AYJ-GZJ300 |
| Max Feed Rate | 1500 mL/h |
| Temperature Range | Ambient to 50 °C |
| Vacuum Range | −0.05 to −0.06 MPa |
| Particle Size Range | 5–250 µm |
| Moisture Content (Dried Powder) | <1% w/w |
| Feed Types | Aqueous solutions, emulsions, suspensions |
| Heating Control Accuracy | ±1 °C (PID) |
| Nozzle Orifice Options | 0.5 / 0.7 / 1.0 / 1.5 / 2.0 mm |
| Power Supply | 6 kW / 380 V AC |
| Brand | AnYuJie |
|---|---|
| Origin | Zhejiang, China |
| Model | AYJ-GZJ5000D |
| Sample Types | Aqueous solutions, emulsions, suspensions |
| Max. Feed Rate | 5000 mL/h |
| Temperature Range | Low-temp mode: ambient to 80°C (±0.5°C accuracy with temperature curve logging) |
| High-temp mode | ambient to 280°C (±0.5°C accuracy with curve logging) |
| Outlet Temperature Range | ambient to 100°C (±0.5°C) |
| Particle Size Distribution | 5–250 µm |
| Atomization Nozzle | 316 stainless steel two-fluid nozzle (interchangeable orifices: 0.5 / 0.75 / 1.0 / 2.0 mm) |
| Drying Chamber Diameter | 800 mm |
| Airflow Range | 0–420 m³/h |
| Atomization Pressure | 0–0.6 MPa |
| Heating Power | 6000 W |
| Dehumidification Power | 2 × 2000 W |
| Integrated Oil-Free Compressor | Yes |
| Built-in Condensation & Moisture Recovery System | Yes |
| Safety Protections | Overheat, overpressure, voltage stabilization, and leakage current monitoring with auto-shutdown |
| Brand | AnYuJie |
|---|---|
| Origin | Zhejiang, China |
| Model | AYJ-GZJ5L |
| Sample Types | Aqueous solutions, emulsions, suspensions |
| Max Feed Rate | 5000 mL/h |
| Temperature Range | 30–300 °C |
| Particle Size Range | 5–250 µm |
| Inlet Temp Control | 30–300 °C |
| Outlet Temp Control | 30–140 °C |
| Evaporation Capacity | 1500–5000 mL/h |
| Drying Time | 1.0–1.5 s |
| Chamber ID | 1000 mm |
| Chamber Height | 2000 mm |
| Power Supply | 380 V / 20 kW |
| Fan Power | 2.2 kW |
| Airflow | 315 m³/min |
| Pressure Range | +40 kPa / −32 kPa |
| Control Accuracy | ±1 °C |
| Material Contact Surface | AISI 304 stainless steel |
| Brand | AnYuJie |
|---|---|
| Origin | Zhejiang, China |
| Model | AYJ-GZJ5Y |
| Max Feed Rate | 5000 mL/h (dependent on solids content) |
| Inlet Air Temp Range | Ambient to 300°C (±0.5°C control accuracy) |
| Outlet Air Temp Range | Ambient to 200°C (±0.5°C) |
| Primary Condenser Temp Range | −20 to 30°C (±0.5°C) |
| Secondary Condenser Temp Range | −10 to 30°C (±0.5°C) |
| Oxygen Monitoring Range | 0–100% (0.1% resolution |
| Particle Size Output | 5–250 µm |
| Nitrogen Flow Rate | 100 L/min (99.9% purity) |
| Total Power Consumption | 26 kW |
| Voltage | 380 V AC |
| Overall Dimensions | 2000 × 1500 × 2500 mm (L×W×H) |
| Dryer Tower Dimensions | Ø800 × H1500 mm |
| Collection Vessel | Ø550 × H1560 mm ×2 |
| Filtration Rating | ≤1 µm |
| Explosion Relief Threshold | Adjustable ≥0.02 MPa |
| Airflow Control | 0–300 m³/h (variable-frequency blower) |
| Cleaning Access Window | 340 × 340 mm |
| Brand | AnYuJie |
|---|---|
| Origin | Zhejiang, China |
| Model | AYJ-PWGZ2000 |
| Max Feed Rate | 2000 mL/h |
| Temperature Range | 30–300 °C (inlet), 30–200 °C (outlet) |
| Particle Size Distribution | 5–250 µm |
| Feed Types | Aqueous solutions, emulsions, suspensions |
| Drying Time | 0.8–1.0 s |
| Power | 3.8 kW / 220 V |
| Dimensions | 1380 × 770 × 590 mm (H × L × W) |
| Nozzle Orifice Options | 0.5, 0.7, 0.75, 1.0, 1.5, 2.0 mm |
| Control Precision | ±0.5 °C (PID) |
| Noise Level | <60 dB(A) |
| Material Construction | 316L stainless steel frame + borosilicate glass drying chamber (optional stainless steel collection system) |
| Brand | AnYuJie |
|---|---|
| Origin | Zhejiang, China |
| Model | AYJ-PWGZ6000 |
| Sample Types | Aqueous & organic solvent solutions |
| Max Feed Rate | 1000 mL/h (dependent on solids content) |
| Inlet Temperature Range | RT–250 °C |
| Outlet Temperature Range | RT–140 °C |
| Particle Size Output | 5–250 µm |
| Oxygen Monitoring | 0–100% O₂ (±0.1% accuracy) |
| Pressure Monitoring | 0–100 kPa |
| Automatic Pressure Relief Threshold | ≥0.02 MPa |
| Airflow Control | 0–30 m³/h (inverter-driven blower) |
| Condenser Temp Range | −5 to 30 °C (±0.5 °C) |
| Brand | KEZHE Shanghai |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Origin Category | Domestic (China) |
| Model | CoolMax-3000 |
| Price | USD 28,000 (approx.) |
| 雾化方� | �: FocusJet coaxial flow design |
| 流动相流速 | 0.2–2 mL/min |
| 材料 | 316 stainless steel, PEEK, fused silica, PTFE |
| 数字数据采集速率(最大) | 100 Hz |
| 数字噪声滤波 | 4th-order low-pass Bessel filter |
| 模拟信号输出 | 0–1 V DC (optional) |
| 蒸发温度 | 35 °C or 50 °C |
| 预热时间 | <15 min to 35 °C |
| 气体进口压力 | 70–80 psi (0.4–0.5 MPa) |
| 气体消耗 | 4 L/min |
| 气体压力控制 | Manual |
| 控制方� | �: PC + touchscreen interface |
| 氮气发生器原理 | Membrane separation |
| 氮气输出流量 | 5 L/min |
| 氮气输出压力 | 0.6 MPa |
| 氮气纯度 | 99.9% |
| 露点 | −45 °C |
| AD转换器 | 24-bit |
| 检测限 | pg-level |
| Brand | EYELA (Tokyo Rikakikai Co., Ltd.) |
|---|---|
| Origin | Japan |
| Model | SD-1000 |
| Inlet Temperature Range | 40–200 °C |
| Temperature Control Accuracy | ±1 °C |
| Max. Evaporation Rate | 1500 mL/h |
| Drying Air Flow | 0.2–0.75 m³/min |
| Atomizing Air Pressure | 20–245 kPa |
| Feed Pump Flow Rate | 150–1700 mL/h |
| Stirrer Speed | 100–1000 rpm |
| Sample Vessel Capacity | 50 mL–2 L |
| Heater Power | 3 kW |
| Nozzle Type | Twin-fluid nozzle (standard orifice ID: 0.4 mm) |
| Construction | Borosilicate glass evaporation chamber & cyclonic separator |
| Powder Collection Vessel | 600 mL borosilicate glass |
| Safety Features | Real-time diagnostics for inlet/outlet temperature deviation, airflow anomaly, heater fault, and feed pressure failure |
| Auto-cleaning Interval | Programmable 1–20 min cycles |
| Analog Output | 0–10 mV (inlet temp, outlet temp, air flow) |
| Dimensions (W×D×H) | 700 × 620 × 1500 mm |
| Weight | ~110 kg |
| Brand | EYELA |
|---|---|
| Origin | Japan |
| Model | SD-1010 |
| Evaporation Capacity | Up to 1500 mL/h |
| Inlet Air Temperature Range & Accuracy | 40–200 °C (±1 °C) |
| Hot Air Flow Rate | 0.2–0.75 m³/min |
| Atomizing Air Pressure | 20–250 kPa (0.2–2.5 kgf/cm²) |
| Sample Stirring Speed & Volume | 100–1000 rpm, 50 mL–2 L (water equivalent) |
| Feed Pump Flow Rate | 150–1700 mL/h |
| Heater Power | 3 kW |
| Atomizer Type | Dual-fluid nozzle (standard orifice ID: 0.71 mm) |
| Collection Vessel | Borosilicate glass, 600 mL capacity |
| Dimensions & Weight | 700 W × 620 D × 1500 H mm, approx. 110 kg |
| Power Supply | AC 220 V, single-phase, 50/60 Hz, 21 A, 4.2 kVA |
| Brand | JTONE |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | JT-6000Y |
| Sample Types | Emulsions, Suspensions |
| Max Throughput | 2000 mL/h |
| Temperature Range | 50–80 °C |
| Particle Size Tunability | Yes |
| Nozzle Orifice Options | 0.7 mm, 1.0 mm, 1.5 mm, 2.0 mm |
| Vacuum Range | –0.05 to –0.06 MPa |
| Heating Control Accuracy | ±1 °C (PID) |
| Power Supply | 5.8 kW / 380 V |
| Dimensions (L×W×H) | 850 × 1000 × 1650 mm |
| Brand | KEZHE SHANGHAI |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | CoolMax-2000 |
| Price | ¥200,000 |
| Nebulization Method | FocusJet concentric flow design |
| Mobile Phase Flow Rate | 0.2–2 mL/min |
| Construction Materials | 316 stainless steel, PEEK, fused silica, PTFE |
| Digital Data Acquisition Rate (max) | 100 Hz |
| Digital Noise Filtering | 4th-order low-pass Bessel filter |
| Analog Output Option | 0–1 V DC |
| Evaporation Temperature Settings | 35 °C or 50 °C |
| Preheat Time to 35 °C | <15 min |
| Gas Inlet Pressure | 70–80 psi (0.4–0.5 MPa) |
| Gas Consumption | 4 L/min |
| Gas Pressure Control | Manual |
| Control Interface | PC + integrated touchscreen |
| AD Converter Resolution | 24-bit |
| Detection Limit | pg-level |
| Brand | NAI Instruments |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | NAI-GZJ |
| Pricing | Available Upon Request |
| Material Contact Parts | Borosilicate Glass & 304 Stainless Steel |
| Drying System | Open-Circuit |
| Atomization | Dual-Fluid Nozzle (Standard: 0.75 mm Orifice) |
| Airflow Configuration | Co-Current |
| Hot Air Residence Time | 1.0–1.5 s |
| Evaporation Capacity | 1500–2000 mL/h |
| Inlet Air Temperature Range | Ambient to 300 °C (PID-Controlled, ±0.5 °C Accuracy) |
| Outlet Air Temperature Display Range | Up to 140 °C |
| Heating Power | 3 kW |
| Compressed Air Supply | Integrated Oil-Free Air Compressor (0.6 kW, 0.7 MPa) |
| Blower | 0.4 kW, 7 m³/min |
| Total Power Consumption | 4 kW / 220 V AC |
| Dimensions (L×W×H) | 770 × 590 × 1380 mm |
| Net Weight | 100 kg (Glass Tower), 125 kg (Stainless Steel Tower) |
| Minimum Feed Volume | 50 mL |
| Maximum Feed Rate | 2000 mL/h |
| Control System | PCB-Based Controller + 7-inch Color Touchscreen Interface |
| Optional Accessories | Syringe Pump Module, Cold Trap, Inert Gas Purge Kit |
| Brand | SCIENTZ |
|---|---|
| Origin | Zhejiang, China |
| Model | FY-SPRAY Mini |
| Max. Feed Rate | 1800 mL/h |
| Inlet Temp. Range | 30–250 °C ±1 °C |
| Outlet Temp. Range | 30–150 °C ±1 °C |
| Particle Size Range | 5–50 µm |
| Heating Power | 3.0 kW (220 V) |
| Dryer Tower Material | Borosilicate Glass & AISI 316L Stainless Steel |
| Atomizer | Imported Dual-Fluid Nozzle (0.7 mm Orifice) |
| Drying Time | 1.0–1.5 s |
| Automatic Needle Clearing Cycle | 0–60 s Adjustable |
| Dimensions (H×W×D) | 922 × 570 × 470 mm |
| Weight | 58 kg |
| Power Supply | 220/230 V, 50–60 Hz |
| Total Rated Power | 3.6 kW |
| Brand | Yacheng / PILOTECH |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | YC-015 |
| Maximum Feed Rate | 1500 mL/h |
| Particle Size Range | 1–25 µm |
| Inlet Air Temperature Range | Up to 250 °C |
| Drying Residence Time | 1.0–1.5 s |
| Temperature Control Accuracy | ±1 °C (PID-controlled) |
| Noise Level | <60 dB(A) |
| Standard Nozzle Orifice | 1.0 mm (optional: 0.5/0.8/1.5/2.0 mm) |
| Construction Material | 316 Stainless Steel + Borosilicate Glass |
| Power Supply | 3.5 kW, 220 V, Single-phase |
| Brand | YaCheng / PILOTECH |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | YC-1800 |
| Price | Upon Request |
| Max Feed Rate | 1800 mL/h |
| Minimum Sample Volume | 50 mL |
| Drying Inlet Temperature Range | 110–150 °C |
| Temperature Control Accuracy | ±1 °C (PID) |
| Nozzle Orifice Options | 0.5, 0.7, 1.0, 1.5, 2.0 mm |
| Power Supply | 4 kW / 380 V AC |
| Construction | Full 316L Stainless Steel |
| Atomization | Dual-Fluid Pneumatic Nozzle |
| Noise Level | <65 dB(A) |
| Particle Flowability | High (Narrow Normal Size Distribution) |
| Brand | YaCheng / PILOTECH |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | OEM Manufacturer |
| Country of Origin | China |
| Model | YC-510 |
| Sample Type | Aqueous solutions only |
| Max Feed Rate | 500 mL/h |
| Inlet Air Temperature Range | 50–200 °C (vacuum-enabled low-temp mode: ≤55 °C) |
| Particle Size Distribution | 1–25 µm |
| Vacuum Level | −0.08 MPa |
| Temperature Control Accuracy | ±1 °C (PID-regulated) |
| Nozzle Orifice | Standard 1.0 mm (optional: 0.5/0.8/1.5/2.0 mm) |
| Minimum Sample Volume | 10–20 mL (dependent on solids content) |
| Final Moisture Content | <1% w/w |
| Construction | Full 316L stainless steel |
| Power Rating | 3.5 kW |
| Display | Color LCD touchscreen with Chinese UI (factory-default) |
| Brand | YAMATO |
|---|---|
| Origin | Japan |
| Model | DL410 |
| Maximum Water Evaporation Rate | 3000 mL/h |
| Atomization Method | Two-Fluid Nozzle (Orifice Diameter: 0.7 mm) |
| Drying Configuration | Co-Current Downward Spray |
| Inlet Air Temperature Range | 0–300 °C |
| Outlet Air Temperature Monitoring | K-Type Thermocouple |
| Drying Chamber Dimensions | Ø457 mm × H975 mm (Borosilicate Glass) |
| Chamber & Cyclone Material | Ultra-Hard Borosilicate Glass |
| Feed Pump | Precision Peristaltic Type, 0–70 mL/min Adjustable |
| Hot Air Flow Control | DC Brushless Blower, 0.3–1.0 m³/min |
| Heating System | Dual Stainless Steel Heaters, 2.0 kW × 2 |
| Nozzle Maintenance | Automated Pulse Cleaning (Probe Tapping + Purge Air) |
| Safety Features | Independent Over-Temperature Cut-Off, Leakage Current Protection, Feed Pump Reverse Rotation Detection, Electrostatic Discharge Brush, Integrated Safety Enclosure |
| Power Supply | AC 220 V, 50/60 Hz, 24 A |
| Dimensions (W×D×H) | 1060 × 880 × 1770 mm |
| Weight | ~180 kg |
| Brand | YAMATO |
|---|---|
| Origin | Japan |
| Model | GB210-A |
| Input Voltage Range | AC 200–240 V (50/60 Hz) |
| Inlet Air Temperature Range | 40–220 °C (±1 °C PID control) |
| Outlet Air Temperature Range | 0–60 °C |
| Drying Air Flow | 0–0.7 m³/min |
| Atomizing Air Pressure | 0–0.6 MPa |
| Feed Pump Flow Rate | 0–26 mL/min |
| Power Consumption | 2.0–2.88 kW |
| Dimensions (W×D×H) | 760 × 420 × 1350 mm |
| Weight | 110 kg |