Stirrer
Filter
Showing 271–300 of 345 results
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | RW 47 digital |
| Max. Mixing Volume (H₂O) | 200 L |
| Input Power | 511 W |
| Output Power | 370 W |
| Motor Principle | Three-phase AC |
| Speed Display | LED |
| Speed Range | 57–1300 rpm |
| Max. Viscosity | 100,000 mPa·s |
| Max. Shaft Output Power | 300 W |
| Duty Cycle | 100 % continuous operation |
| Max. Torque (60 rpm) | 4642 N·cm |
| Max. Torque (100 rpm) | 3000 N·cm |
| Max. Torque (1000 rpm) | 285 N·cm |
| Torque Range I | 3000 N·cm |
| Torque Range II | 620 N·cm |
| Speed Range I (50 Hz) | 57–275 rpm |
| Speed Range II (50 Hz) | 275–1300 rpm |
| Speed Control | Continuously variable |
| Speed Setting Accuracy | ±1 rpm |
| Speed Measurement Deviation | ±10 rpm |
| Impeller Mounting | Fixed chuck |
| Chuck Capacity | Ø 3–16 mm |
| Hollow Shaft ID | 13 mm |
| Mounting | Flange |
| Speed Control Type | Mechanical |
| Rated Torque | 30 N·m |
| Housing Material | Cast aluminum with thermoplastic polymer coating |
| Dimensions (W×H×D) | 145 × 478 × 358 mm |
| Weight | 16.6 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | 80 % |
| Ingress Protection | IP54 per DIN EN 60529 |
| Voltage | 3 × 400 V |
| Frequency | 50 Hz |
| Instrument Input Power | 513 W |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA-Werke GmbH & Co. KG |
| Type | Digital Overhead Mechanical Stirrer |
| Max. Mixing Volume (H₂O) | 200 L |
| Speed Range | 57–1300 rpm |
| Motor Output Power | 370 W |
| Max. Torque (at 60 rpm) | 4642 N·cm |
| Max. Viscosity | 100,000 mPa·s |
| IP Rating | IP54 |
| Input Voltage | 3 × 400 V / 3 × 230 V, 50 Hz |
| Dimensions (W×H×D) | 145 × 465 × 358 mm |
| Weight | 16 kg |
| Ambient Operating Conditions | 5–40 °C, ≤80 % RH |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA Werke GmbH & Co. KG |
| Product Type | Magnetic Stirrer with Integrated Heating Plate |
| Max. Stirring Volume | 20 L (H₂O) |
| Speed Range | 50 – 1500 rpm |
| Temperature Control Range | Ambient + Self-Heating of Plate – 310 °C |
| Heating Power | 600 W |
| Plate Material | Anodized Aluminum |
| Plate Diameter | Ø 135 mm |
| Dimensions (W × H × D) | 160 × 270 × 85 mm |
| Weight | 2.4 kg |
| IP Rating | IP42 |
| Interface | RS232, USB-B |
| Compliance | DIN EN 60529, CE, RoHS |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | T 65 digital ULTRA-TURRAX® Package |
| Maximum Mixing Volume | 2–50 L (H₂O) |
| Speed Range | 1,000–9,500 rpm |
| Motor Input Power | 2,600 W |
| Motor Output Power | 2,200 W |
| Speed Accuracy | ±3 % |
| Protection Rating | IP 54 |
| Dimensions (W × D × H) | 300 × 390 × 400 mm |
| Weight | 30 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | ≤80 % |
| Max. Viscosity | 5,000 mPa·s |
| Noise Level (no dispersing tool) | 75 dB(A) |
| Speed Control | Continuous (infinitely variable) |
| Display | LED, 7-segment |
| Direction | Reversible |
| Enclosure Standard | DIN EN 60529 |
| Voltage | 3 × 400 V / 3 × 230 V |
| Frequency | 50/60 Hz |
| Process Type | Batch |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | topolino mobil |
| Max. Stirring Volume (H2O) | 0.25 L |
| Speed Range | 500–1800 rpm |
| Max. Stir Bar Length | 30 mm |
| Plate Material | Polypropylene (PP) |
| Plate Diameter | Ø 80 mm |
| Battery Operation | Yes |
| Dimensions (W × H × D) | 140 × 42 × 140 mm |
| Weight | 0.747 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | ≤80 % RH |
| Protection Class | IP20 (per DIN EN 60529) |
| Input Voltage | 100–240 V AC, 50/60 Hz |
| DC Output | 9 V = |
| Current Consumption | 1000 mA |
| Operating Time | 8–12 h (typ.) |
| Charging Time | 2–3 h |
| Power Options | Rechargeable AA batteries (user-supplied), AC adapter (included), or hybrid mode (adapter + batteries) |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA-Werke GmbH & Co. KG |
| Product Type | Portable Magnetic Stirrer |
| Model | TOPOLINO MOBIL |
| Maximum Stirring Volume | 0.25 L (H₂O) |
| Speed Range | 300–1800 rpm |
| Power Supply | Rechargeable AA batteries (9 V DC) or AC adapter (100–240 V, 50/60 Hz) |
| Battery Life | 8–12 h |
| Charging Time | 2–3 h |
| Operating Temperature | 5–40 °C |
| Relative Humidity Limit | ≤80 % RH |
| IP Rating | IP20 |
| Dimensions (W × H × D) | 140 × 42 × 140 mm |
| Weight | 0.747 kg |
| Stir Bar Max Length | 30 mm |
| Plate Material | Polypropylene (PP) |
| Plate Diameter | 80 mm |
| Motor Type | Brushless DC Motor |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA-Werke GmbH & Co. KG |
| Model | Topolino mobil |
| Instrument Type | Magnetic Stirrer |
| Maximum Stirring Volume (H₂O) | 0.25 L |
| Speed Range | 500–1800 rpm |
| Power Supply | Rechargeable AA batteries (9 V DC) or AC adapter (100–240 V, 50/60 Hz) |
| Battery Runtime | 8–12 h |
| Charging Time | 2–3 h |
| Stir Bar Max Length | 30 mm |
| Work Plate Material | Polypropylene (PP) |
| Work Plate Diameter | 80 mm |
| Dimensions (W × H × D) | 140 × 42 × 140 mm |
| Weight | 0.747 kg |
| Ambient Operating Temperature | 5–40 °C |
| Relative Humidity Limit | ≤80 % RH |
| Ingress Protection | IP20 |
| Motor Type | Brushless DC motor |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | topolino |
| Motor Output Power | 0.8 W |
| Max. Stirring Volume (H2O) | 0.25 L |
| Speed Range | 500–1800 rpm |
| Speed Control | Continuous (Stepless) |
| Max. Stir Bar Length | 30 mm |
| Plate Material | Polypropylene (PP) |
| Plate Diameter | Ø 80 mm |
| Dimensions (W × H × D) | 95 × 37 × 115 mm |
| Weight | 0.484 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | ≤80 % RH |
| Protection Class | IP21 (per DIN EN 60529) |
| Input Voltage | 100–240 V AC |
| Frequency | 50/60 Hz |
| Input Power | 10 W |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA Werke GmbH & Co. KG |
| Type | Magnetic Stirrer |
| Model | topolino |
| Maximum Stirring Volume | 0.25 L (H₂O) |
| Speed Range | 300–1800 rpm |
| Motor Output Power | 0.8 W |
| Speed Control | Continuous (Stepless) |
| Max Stir Bar Length | 30 mm |
| Plate Material | Polypropylene (PP) |
| Plate Diameter | 80 mm |
| Dimensions (W × H × D) | 95 × 37 × 115 mm |
| Weight | 0.484 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | ≤80 % RH |
| Ingress Protection | IP21 |
| Input Voltage | 100–240 V AC |
| Frequency | 50/60 Hz |
| Power Consumption | 10 W |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | TWISTER Add-on Unit |
| Motor Output Power | 5 W |
| Speed Range | 100–3000 rpm |
| Speed Setting Accuracy | ±100 rpm |
| Stirring Volume Range (H₂O) | 0.005–5 L |
| Stir Bar Length Compatibility | 10–30 mm |
| Heating Plate Self-Heating (22°C ambient, 1 h) | +6 K |
| Workplate Material | Glass |
| Workplate Dimensions | 124 × 124 mm |
| Unit Dimensions | 135 × 24 × 135 mm |
| Weight | 0.6 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | 80 % |
| Protection Rating | IP66 (DIN EN 60529) |
| Input Voltage | 100–240 V AC, 50/60 Hz |
| Instrument Input Power | 10 W (operational), 2 W (standby) |
| DC Supply | 24 V =, Current Draw: 400 mA |
| Module Scalability | Up to 16 units (≥4 units require TWISTER HUB) |
| Master-Slave Synchronization | Supported (≥2 units) |
| Cavity Recognition | Optional activation/deactivation |
| Acceleration Ramp Control | Available via HUB only |
| Independent Stirring Groups | Up to 6 (via HUB) |
| Communication Interfaces | RS232 (optional), USB (optional), Bluetooth (optional), Wi-Fi (optional) |
| Timer Function | Adjustable (6 s–1 min) |
| Intermittent Mode | Yes |
| Viscosity Trend Monitoring | Yes |
| Stir Bar Ejection Detection | Optional |
| Graphical Display Function | Optional |
| Programmable Profiles | Optional |
| No-Load Speed Deviation (1500 rpm, 25°C, nominal voltage) | ±2 % |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | TWISTER SET 1 |
| Motor Output Power | 5 W |
| Speed Range | 100–3000 rpm |
| Speed Setting Accuracy | ±100 rpm |
| Max. Stirring Volume (H₂O) | 5 L |
| Min. Stirring Volume (H₂O) | 0.005 L |
| Stir Bar Length Compatibility | 10–30 mm |
| Heating Plate Self-Heating (22°C ambient, 1 h) | +6 K |
| Work Surface Material | Tempered Glass |
| Work Surface Dimensions | 124 × 124 mm |
| Auto Reverse Rotation | Yes |
| Intermittent Mode | Optional |
| Viscosity Trend Monitoring | Yes |
| Stir Bar Ejection Detection | Optional |
| Timer Function | Optional (Min. Setting: 6 s |
| Max. Setting | 1 min) |
| Graphical Display Function | Optional |
| Programmable Profiles | Optional |
| Speed Deviation (No-load, 1500 rpm, 25°C) | ±2 % |
| Modular Scalability | Up to 16 Units (≥4 units require HUB) |
| Master-Slave Synchronization | Yes (≥2 units) |
| Vessel Recognition | Optional (Activatable/Deactivatable) |
| Acceleration Ramp Control | Optional (HUB only) |
| Independent Stirring Groups | Up to 6 (via HUB) |
| Dimensions (W × H × D) | 135 × 24 × 135 mm |
| Weight | 0.6 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | 80 % |
| Ingress Protection | IP66 (per DIN EN 60529) |
| Communication Interfaces | RS232 (optional), USB (optional), Bluetooth (optional), Wi-Fi (optional) |
| Input Voltage | 100–240 V AC |
| Frequency | 50/60 Hz |
| Max. Input Power | 10 W |
| Standby Power Consumption | 2 W |
| DC Supply | 24 V = |
| Current Draw | 400 mA |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | TWISTER SET 2 |
| Motor Output Power | 5 W per position |
| Speed Range | 100–3000 rpm |
| Speed Setting Resolution | 100 rpm |
| Speed Accuracy (no-load, 1500 rpm, 25 °C) | ±2 % |
| Max. Stirring Volume (H₂O) | 5 L per position |
| Min. Stirring Volume (H₂O) | 0.005 L per position |
| Stir Bar Length Compatibility | 10–30 mm |
| Heating Plate Self-Heating (22 °C ambient, 1 h) | +6 K |
| Workplate Material | Tempered Glass |
| Workplate Dimensions | 124 × 124 mm |
| Inter-Stirring Position Spacing | 135 mm |
| Auto Reverse Rotation | Yes |
| Intermittent Mode | Optional |
| Viscosity Trend Monitoring | Yes |
| Stir Bar Ejection Detection | Optional |
| Timer Function | Optional (Min. Setting: 6 s |
| Max. Setting | 1 min) |
| Graphical Display Mode | Optional |
| Programmable Profiles | Optional |
| Modular Expandability | Up to 16 units (≥4 units require IKA HUB) |
| Master-Slave Synchronization | Yes (≥2 units) |
| Vessel Recognition (Cup Detection) | Enabled/Disabled via Settings |
| Acceleration Ramp Control | Optional (HUB only) |
| Independent Stirring Groups | Up to 6 groups (HUB-controlled) |
| Dimensions (W × H × D) | 135 × 24 × 135 mm |
| Weight | 0.6 kg |
| Ambient Operating Temperature | 5–40 °C |
| Relative Humidity Limit | 80 % RH |
| Ingress Protection Rating | IP66 |
| Communication Interfaces | RS232 (optional), USB (optional), Bluetooth (optional), Wi-Fi (optional) |
| Input Voltage | 100–240 V AC, 50/60 Hz |
| Total Input Power | 10 W |
| Standby Power Consumption | 2 W |
| DC Supply | 24 V =, Current Draw: 400 mA |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | TWISTER SET 3 |
| Motor Output Power | 5 W per position |
| Speed Range | 100–3000 rpm |
| Speed Setting Accuracy | ±100 rpm |
| Speed Display | Dual LED (setpoint & actual) |
| Rotation Direction | Reversible (clockwise/counter-clockwise) |
| Stirring Volume Range (H₂O) | 5 mL–5 L per position |
| Stir Bar Length Compatibility | 10–30 mm |
| Heating Plate Self-Heating (22°C ambient, 1 h) | +6 K |
| Workplate Material | Tempered Glass |
| Workplate Dimensions | 124 × 124 mm |
| IP Rating | IP66 |
| Operating Ambient Temperature | 5–40 °C |
| Relative Humidity Limit | ≤80 % RH (non-condensing) |
| Input Voltage | 100–240 V AC, 50/60 Hz |
| Total Input Power | 10 W |
| Standby Power Consumption | 2 W |
| DC Supply | 24 V =, 400 mA |
| Interface Options | RS232 (optional), USB (optional), Bluetooth (optional), Wi-Fi (optional) |
| Modular Expandability | Up to 30 positions (with hub and additional units) |
| Master-Slave Synchronization | Supported (≥2 units) |
| Vessel Recognition | Optional activation/deactivation |
| Acceleration Ramp Control | Available via HUB only |
| Stirring Groups | Up to 6 independent groups (HUB-controlled) |
| Timer Range | 6 s – 1 min |
| Intermittent Mode | Yes |
| Viscosity Trend Monitoring | Yes |
| Stir Bar Ejection Detection | Optional |
| Graphical Functionality | Optional |
| Programmable Profiles | Optional |
| No-Load Speed Deviation (1500 rpm, 25°C, nominal voltage) | ±2 % |
| Dimensions (W × H × D) | 135 × 24 × 135 mm |
| Weight | 0.6 kg |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | TWISTER SET 4 |
| Motor Output Power | 5 W per station |
| Number of Stirring Positions | 4 |
| Inter-Position Spacing | 135 mm |
| Minimum Stirring Volume (H₂O) | 0.005 L |
| Maximum Stirring Volume (H₂O) | 5 L per station |
| Speed Range | 100–3000 rpm |
| Speed Setting Resolution | 100 rpm |
| Speed Accuracy (no-load, nominal voltage, 1500 rpm, 25 °C) | ±2 % |
| Stir Bar Length Compatibility | 10–30 mm |
| Heating Plate Self-Heating (22 °C ambient, 1 h hold) | +6 K |
| Working Plate Material | Tempered Glass |
| Working Plate Dimensions | 124 × 124 mm |
| Automatic Reverse Rotation | Yes |
| Intermittent Mode | Optional |
| Viscosity Trend Monitoring | Yes |
| Stir Bar Ejection Detection | Optional |
| Timer Function | Optional (min. setting: 6 s |
| max. setting | 1 min) |
| Graphical Display Mode | Optional |
| Programmable Profiles | Optional |
| Modular Expandability | Yes (2–16 units |
| Master-Slave Synchronization | Yes (≥2 units required) |
| Vessel Recognition (Cup Detection) | Configurable On/Off |
| Acceleration Ramp Control | Optional (hub-dependent) |
| Independent Stirring Groups | Up to 6 groups (hub-controlled) |
| Dimensions (W × H × D) | 135 × 24 × 135 mm |
| Weight | 0.6 kg |
| Ambient Operating Temperature | 5–40 °C |
| Relative Humidity Limit | 80 % |
| Ingress Protection Rating | IP66 (DIN EN 60529) |
| Communication Interfaces | RS232 (optional), USB (optional), Bluetooth (optional), Wi-Fi (optional) |
| Input Voltage | 100–240 V AC |
| Frequency | 50/60 Hz |
| Total Input Power | 10 W |
| Standby Power Consumption | 2 W |
| DC Supply | 24 V = |
| Current Draw | 400 mA |
| Brand | Innoteg |
|---|---|
| Origin | Germany |
| Model | MR1 |
| Instrument Type | Magnetic Stirrer |
| Maximum Stirring Volume | 20 L |
| Speed Range | 50–1500 rpm |
| Heating Plate Temperature Range | Ambient to 310 °C |
| Heating Power | 600 W |
| Display | LCD (Digital Setpoint & Actual Value) |
| External Temperature Sensor Support | PT1000, ETS-D5, ETS-D6 |
| Adjustable Safety Temperature Limit | 50–370 °C |
| Safety Modes | 3 Configurable Profiles |
| Stirring Direction | Clockwise/Counterclockwise Selectable |
| Intermittent Operation Mode | Yes |
| Workplate Material | Anodized Aluminum with Ceramic-Coated Surface |
| Compliance | CE, RoHS, IEC 61010-1 |
| Brand | Innoteg |
|---|---|
| Origin | Germany |
| Model | MR5 |
| Instrument Type | Magnetic Stirrer |
| Maximum Stirring Volume | 20 L |
| Speed Range | 50–1500 rpm |
| Temperature Control Range | Ambient to 310 °C |
| Heating Power | 800 W |
| Plate Material | Enamel-coated Aluminum Alloy |
| External Temperature Sensor Compatibility | PT1000, ETS-D5, ETS-D6 |
| Safety Temperature Limit Adjustable | 50–370 °C |
| Operating Modes | 3 Safety-Configurable Modes |
| Stirring Direction | Clockwise/Counterclockwise Selectable |
| Intermittent Operation Mode | Yes |
| Viscosity Trend Monitoring | Real-time Display via LCD |
| Brand | Innoteg |
|---|---|
| Origin | Germany |
| Model | Tor M80 A |
| Stirrer Type | Electric Overhead Stirrer |
| Max. Mixing Volume (Water) | 50 L |
| Speed Range | 50–500 rpm |
| Max. Viscosity | 60,000 mPa·s |
| Max. Torque | 80 N·cm |
| Motor | Brushless DC |
| Display | LED Digital |
| Housing Material | Powder-Coated Cast Aluminum |
| IP Rating | IP54 |
| Dimensions (W×H×D) | 70 × 193 × 147 mm |
| Weight | 1.72 kg |
| Ambient Operating Temperature | 5–40 °C |
| Relative Humidity Limit | ≤80 % RH |
| Brand | INNOTEG |
|---|---|
| Origin | Germany |
| Model | Tor M20A |
| Stirrer Type | Electric Overhead Stirrer |
| Max. Stirring Volume (Water) | 15 L |
| Speed Range | 50–2000 rpm |
| Max. Viscosity | 10,000 mPa·s |
| Max. Torque | 20 N·cm |
| Motor | Brushless DC |
| Power Input/Output | 60 W / 46 W |
| Display | LED Digital |
| Housing Material | Powder-Coated Cast Aluminum |
| IP Rating | IP54 |
| Dimensions (W×H×D) | 70 × 193 × 147 mm |
| Weight | 1.56 kg |
| Operating Temperature | 5–40 °C |
| Relative Humidity | ≤80 % RH |
| Stirrer Shaft Diameter Compatibility | 0.5–8 mm |
| Brand | INNOTEG |
|---|---|
| Model | WM-1 |
| Type | Magnetic Stirrer with Integrated Heating Plate |
| Max Stirring Volume | 20 L |
| Speed Range | 50–2000 rpm |
| Temperature Range | Ambient to 340 °C (Heating Plate) |
| Heating Power | 750 W |
| Temperature Sensor | PT1000 RTD Probe |
| Construction | Anodized Aluminum Heating Plate with Ceramic Coating |
| Safety Features | Adjustable Over-Temperature Cut-off, Auto-Cooling Residual Heat Warning, Keypad Lock, Programmable Timer with Audible Alert, Dual-Mode Operation (Stir Only / Heat Only / Heat & Stir), Reversible Rotation & Intermittent Stirring Modes |
| Compliance | Designed for GLP-compliant laboratory environments |
| Brand | JEIO TECH |
|---|---|
| Origin | South Korea |
| Model | MSA-0420 |
| Stirrer Type | Electric Overhead Stirrer |
| Max. Mixing Volume | 20 L |
| Speed Range | 80–2000 rpm |
| Torque | 19 N·cm |
| Max. Viscosity Handling | 10,000 cP (at 1200 rpm) |
| Temperature Control Range | 5–40 °C |
| Motor | Brushless DC |
| Power Input/Output | 70 W / 40 W |
| Chuck Capacity | 3–10 mm |
| Housing Material | Anodized Aluminum Body with PP Components |
| Dimensions (W×H×D) | 75 × 215 × 150 mm |
| Net Weight | 2.8 kg |
| Protection Class | IP30 (DIN EN 60529) |
| Operating Ambient | 5–40 °C, ≤80% RH |
| Brand | JEIO TECH |
|---|---|
| Model | MSH-0512 |
| Origin | South Korea |
| Stirrer Type | Electric Overhead Stirrer |
| Max. Mixing Volume | 100 L |
| Speed Range | 80–1200 rpm |
| Torque | 41.6 N·cm |
| Motor Power (Input/Output) | 71 W / 48 W |
| Chuck Capacity | 3–10 mm |
| Operating Temperature | 5–40 °C |
| Relative Humidity | ≤80% RH |
| Housing Material | Powder-Coated Aluminum / PP |
| Motor Type | Brushless DC |
| Dimensions (W×H×D) | 80 × 185 × 235 mm |
| Net Weight | 3.1 kg |
| Protection Rating | IP30 |
| Control Interface | LCD Touchscreen with PID Speed Regulation |
| Connectivity | USB Port for Data Logging & External Control |
| Safety Features | Overload Protection, Overtemperature Shutdown, Motor Cooling Fan, Isolated Power Adapter, Screen Lock Function |
| Brand | JEIO TECH |
|---|---|
| Origin | South Korea |
| Model | MSH-0520 |
| Maximum Stirring Volume | 60 L (water) |
| Speed Range | 50–2000 rpm |
| Torque | 20.8 N·cm |
| Viscosity Handling | up to 50,000 cP (at 300 rpm) |
| Temperature Control Range | 5–40 °C |
| Motor Type | Brushless DC (BLDC) |
| Power Input | 71 W |
| Clamp Shaft Diameter | 3–10 mm |
| Dimensions (W×H×D) | 80 × 185 × 235 mm |
| Net Weight | 3.1 kg |
| Display | Full-color capacitive touchscreen with rotary encoder |
| Connectivity | USB (PC control & data logging), optional Bluetooth module, external controller interface |
| Safety Features | Overheat protection, overload protection, motor temperature monitoring (3-color LED indicator), soft-start/stop, keypad lock, spark-free operation |
| Brand | LabTech |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Magnetic Stirrer |
| Model | ES35A Pro |
| Maximum Stirring Volume | 20 L |
| Speed Range | 0–1500 rpm |
| Temperature Control Range | Ambient to 340 °C |
| Heating Block Compatibility | Round-Bottom Flask Heater Block |
| Stir Bar Options | Multiple Standard Sizes Included |
| Safety Features | Dual Independent Thermal Cut-Off (350 °C Auto-Shutdown), Silicone Resin Safety Cover with Dedicated Safety Circuit |
| Drive System | Brushless Electronic Motor with Load-Compensated Speed Regulation |
| Magnet Assembly | High-Strength Rare-Earth Permanent Magnet |
| Enclosure Rating | IP42 |
| Brand | LabTech |
|---|---|
| Origin | Beijing, China |
| Model | ES35A Pro |
| Instrument Type | Magnetic Stirrer |
| Maximum Stirring Volume | 20 L |
| Speed Range | 0–1500 rpm |
| Temperature Control Range | Ambient to 340 °C |
| Safety Cut-off | 350 °C (automatic heating shutdown) |
| Enclosure Rating | IP42 |
| Drive System | Electronically Controlled Variable-Speed Motor with Constant-RPM Feedback Loop |
| Magnetic Coupling | High-Strength Permanent Magnet Assembly |
| Accessories | Round-Bottom Flask Heater Block, Multiple-Size PTFE-Coated Stir Bars, Silicone Resin Safety Cover with Independent Thermal Safety Circuit |
| Brand | Leici |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Regional Category | Domestic (China) |
| Model | JB-11 |
| Instrument Type | Magnetic Stirrer |
| Maximum Stirring Volume | 1000 mL |
| Speed Range | 100–1800 rpm |
| Speed Display | Segment LCD |
| Speed Accuracy | ±5% or ±10 rpm |
| Stirring Plate Dimensions | 135 mm × 132 mm |
| Plate Material | PC + ABS |
| Stir Bar Included | φ6 × 20 mm |
| Operating Environment | 0–40 °C, ≤85% RH |
| Power Supply | AC 100–240 V input / DC 9 V output |
| Dimensions (L×W×H) | 135 × 195 × 55 mm |
| Weight | ~0.5 kg |
| Brand | Leici |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | JB-12 |
| Instrument Type | Magnetic Stirrer |
| Speed Range | 60–2000 rpm |
| Housing Material | Polycarbonate (PC) |
| Panel Material | Polyethylene Terephthalate (PET) |
| Stirring Mode | Cyclic Rotation |
| Direction Control | Clockwise & Counterclockwise |
| IP Rating | IP65 |
| Dimensions (L×W×H) | 110 × 169 × 109 mm |
| Timer Function | Not Supported |
| Speed Display | Not Supported |
| Temperature Control | Not Available |
| Maximum Stirring Volume | Not Specified |
| Brand | Leici |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic (China-made) |
| Model | JB-13 |
| Instrument Type | Magnetic Stirrer |
| Speed Range | 60–2000 rpm |
| Display | LCD (real-time speed) |
| Stirring Modes | Unidirectional & Periodic Rotation |
| Direction Control | Clockwise/Counter-clockwise Selection |
| Speed Adjustment | Incremental/Decremental Keypad |
| Timer Function | Yes |
| Enclosure Material | Polycarbonate (PC) |
| Panel Material | Polyethylene Terephthalate (PET) |
| Ingress Protection Rating | IP65 |
| Dimensions (L×W×H) | 11 × 169 × 109 mm |
| Weight | Not specified |
| Brand | Leici |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Origin Category | Domestic (China) |
| Model | JB-31 |
| Instrument Type | Magnetic Stirrer |
| Maximum Stirring Volume | 5000 mL |
| Speed Range | 100–2000 rpm |
| Speed Display Accuracy | ±10 rpm |
| Speed Stability | ±10 rpm over 4 h |
| Timer Range | 0 min – 99 h 59 min |
| Timer Accuracy | ±1 min/h |
| Stir Bar Compatibility | Φ5×20 mm, Φ7×30 mm, Φ10×60 mm (standard supplied) |
| Heating Function | None |
| Work Surface Material | Aluminum alloy with ceramic coating |
| Work Surface Dimensions | 145 mm × 145 mm |
| Housing Material | Engineering plastic |
| Operating Environment | 0–40 °C |
| Power Supply | AC 220 ± 22 V, 50 ± 1.0 Hz |
| Dimensions (L×W×H) | 160 × 280 × 95 mm |
| Net Weight | ~1.8 kg |
| Brand | Leici |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic (China-made) |
| Model | JB-31T |
| Instrument Type | Magnetic Stirrer |
| Max Stirring Volume | 5000 mL |
| Speed Range | 100–2000 rpm |
| Heating Plate Temperature Range | Ambient to 280 °C |
| Speed Accuracy | ±10 rpm |
| Speed Stability | ±10 rpm over 4 h |
| Timer Range | 0 min – 99 h 59 min |
| Timer Accuracy | ±1 min/h |
| Heating Power | 700 W |
| Work Surface | 145 mm × 145 mm Aluminum Alloy with Ceramic Coating |
| Dimensions | 160 × 280 × 95 mm |
| Weight | ~1.8 kg |
| Power Supply | AC 220 ± 22 V, 50 ± 1.0 Hz |
| Brand | Leici |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic (China-Made) |
| Model | JB-31TP |
| Instrument Type | Magnetic Stirrer |
| Maximum Stirring Volume | 5000 mL |
| Speed Range | 100–2000 rpm |
| Temperature Control Range (Hotplate Surface) | Ambient to 280 °C |
| Temperature Control Range (Solution) | Ambient to 180 °C |
| Speed Accuracy | ±10 rpm |
| Speed Stability | ±10 rpm over 4 h |
| Temperature Accuracy (Hotplate) | ±0.5 °C |
| Temperature Accuracy (Solution) | ±1.0 °C |
| Temperature Fluctuation (Solution) | ≤1.0 °C per 10 min |
| Heating Power | 700 W |
| Work Surface | 145 mm × 145 mm, Aluminum Alloy with Ceramic Coating |
| Dimensions | 160 × 280 × 95 mm |
| Weight | ~1.8 kg |
| Power Supply | AC 220 V ±10 %, 50 Hz |
| Operating Environment | 0–40 °C, RH ≤85 % |
| Timer Range | 0 min–99 h 59 min |
| Timer Accuracy | ±1 min/h |
| Standard Accessories | T-820D-J Temperature Probe, Magnetic Stir Bars (Φ5×20 mm, Φ7×30 mm, Φ10×60 mm), Electrode Holder (3-position), Support Stand |