Stirrer
Filter
Showing 361–390 of 789 results
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | Eurostar Power Control P4/P7 |
| Speed Control | Stepless (0–2000 rpm) |
| Torque Range | Up to 150 N·cm (P4), Up to 300 N·cm (P7) |
| Display | Dual digital display (set speed & actual speed, torque & viscosity estimation) |
| Interface | RS232 |
| Compliance | CE, RoHS, IEC 61000-6-3/6-4 |
| Safety Features | Overload protection, soft-start circuitry, thermal cut-off, non-penetrating shaft design |
| Software Compatibility | labworldsoft® (v5.0+) for remote control, real-time data logging, and audit-trail-enabled operation |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | Eurostar Power Control |
| Instrument Type | Digital Overhead Stirrer (Viscometric) |
| Max. Mixing Volume | 40 L |
| Speed Range | 20–2000 rpm |
| Speed Control | Microprocessor-based, Stepless (No Gear Shifting) |
| Torque Monitoring | Yes |
| Interface | RS232 |
| Display | Digital (Set & Actual Speed), Analog Torque Output |
| Safety Features | Electronic Overload Protection, Safe Start-up Logic, Integrated Safety Circuit |
| Drive Design | Penetrating Shaft (Through-Drive), Low-Noise Brushless Motor |
| Compliance | CE, RoHS, IEC 61010-1 |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Imported Instrument |
| Model | I-MAG |
| Instrument Type | Magnetic Stirrer |
| Max. Stirring Volume (H₂O) | 300 L |
| Speed Range | 100–1500 rpm |
| Temperature Control | Ambient Only |
| IP Rating | IP64 (Stirring Plate), IP22 (Control Unit) |
| Motor Output Power | 90 W |
| Input Power | 140 W (Operating), 5 W (Standby) |
| Dimensions (W × H × D) | 260 × 70 × 300 mm |
| Weight | 8 kg |
| Operating Ambient Temperature | 5–40 °C |
| Relative Humidity Limit | ≤80 % RH (non-condensing) |
| Protection Class per DIN EN 60529 | IP64 / IP22 |
| Interface Options | RS232, USB, Analog Output (0–10 V), Analog Input (0–10 V), Footswitch Support |
| Programmable Timer Range | 1–14,399 min |
| Stirrer Direction | Reversible (CW/CCW) |
| Stir Bar Length Compatibility | 30–140 mm |
| Max. Load Capacity | 75 kg |
| Stainless Steel Plate Material | 1.4301 (AISI 304) |
| Plate Dimensions | 260 × 260 mm |
| Auto-Reverse Function | Yes |
| Intermittent Mode | Yes |
| Stir Bar Detection (Jump Detection) | Yes |
| Speed Accuracy | ±10 rpm |
| Speed Setting Resolution | 10 rpm |
| Soft Start | Adjustable Acceleration Profile |
| Enclosure Compliance | CE, UL/CSA Recognized, RoHS Compliant |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | I-MAG Industry Stirrer |
| Motor Output Power | 90 W |
| Max. Stirring Volume (H₂O, with SP300 extension platform) | 300 L |
| Max. Load Capacity | 75 kg |
| Max. Stirring Volume (standard configuration, without I-MAG SP) | 50 L |
| Speed Range | 100–1500 rpm |
| Speed Setting Accuracy | ±10 rpm |
| Speed Display | Dual TFT (setpoint & actual value) |
| Stirrer Bar Length Compatibility | 30–140 mm |
| Heating Plate Self-Heating (22°C ambient, 1 h) | +26 K |
| Workplate Material | Stainless Steel 1.4301 |
| Workplate Dimensions | 260 × 260 mm |
| Auto Reverse Rotation | Yes |
| Intermittent Mode | Yes |
| Jump Detection | Yes |
| Built-in Timer | Yes (1–14399 min, TFT display) |
| Programmable Sequences | Yes |
| Analog Pedal Control | Yes |
| Controller-to-Device Cable Length | 2000 mm |
| Dimensions (W × H × D) | 260 × 70 × 300 mm |
| Weight | 8 kg |
| Ambient Operating Temperature | 5–40 °C |
| Relative Humidity Limit | 80 % RH |
| Ingress Protection | IP 64 (workplate), IP 22 (controller) |
| Communication Interfaces | RS 232, USB, Analog Output, Analog Input |
| Voltage Input | 100–240 V AC |
| Frequency | 50/60 Hz |
| Total Instrument Power Consumption | 140 W |
| Standby Power | 5 W |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | KMO 3 basic |
| Motor Output Power | 9 W |
| Max. Stirring Volume (H2O) | 5 L |
| Speed Range | 10–1500 rpm |
| Speed Setting Accuracy | ±10 rpm |
| Speed Deviation (no-load, 1500 rpm, 25 °C) | ±2 % |
| Stir Bar Length Compatibility | 20–80 mm |
| Heating Plate Self-Heating (22 °C ambient, 1 h) | +2 K |
| Work Surface Material | Tempered Glass |
| Work Surface Dimensions | 140 × 120 mm |
| Illumination | Adjustable White LED Panel, Max. Brightness 15000 lx |
| Auto Reverse Rotation | Yes |
| Touch Control Interface | Yes |
| Display | LED, Brightness-Adjustable |
| Lock Function | Yes |
| Integrated USB Interface | Yes (for Labworldsoft control & firmware updates) |
| Mounting Thread for Support Rod | Integrated M6 Female Thread |
| Protection Class | IP42 |
| Operating Ambient Temperature | 5–40 °C |
| Max. Relative Humidity | 80 % |
| Input Voltage | 100–240 V AC, 50/60 Hz |
| Device Input Power | 13 W |
| Standby Power Consumption | 0.8 W |
| DC Supply | 24 V =, Current Draw: 500 mA |
| Dimensions (W × H × D) | 153 × 62.5 × 227 mm |
| Weight | 1.471 kg |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA Werke GmbH & Co. KG |
| Product Type | Magnetic Stirrer |
| Model | KMO 3 basic |
| Maximum Stirring Volume | 5 L (H₂O) |
| Speed Range | 10–1500 rpm |
| Speed Setting Resolution | 10 rpm |
| Display | Bright white LED, adjustable brightness |
| Control Interface | Capacitive touch keys |
| Rotation Direction | Bidirectional (clockwise/counter-clockwise) |
| Integrated USB Port | Yes (for Labworldsoft control and firmware updates) |
| Stir Bar Compatibility | 20–80 mm |
| Work Surface Material | Tempered glass |
| Work Surface Dimensions | 140 × 120 mm |
| Housing Protection Rating | IP42 |
| Ambient Operating Temperature | 5–40 °C |
| Relative Humidity Limit | ≤80 % RH (non-condensing) |
| Power Supply | 100–240 V AC, 50/60 Hz |
| Input Power | 13 W (operational), 0.8 W (standby) |
| DC Output | 24 V =, 500 mA |
| Dimensions (W × H × D) | 153 × 62.5 × 227 mm |
| Weight | 1.2 kg |
| Compliance | DIN EN 60529 (IP42), IEC 61010-1 (Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use) |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | KMO 3 basic |
| Instrument Type | Magnetic Stirrer |
| Maximum Stirring Volume | 5 L |
| Speed Range | 10 – 1500 rpm |
| Display | Bright White LED, Adjustable Brightness |
| Workplate Material | Tempered Glass |
| Workplate Dimensions | 140 × 120 mm |
| Dimensions (W × H × D) | 153 × 62.5 × 227 mm |
| Weight | 1.471 kg |
| Ambient Temperature Range | 5 – 40 °C |
| Relative Humidity Limit | ≤80 % RH |
| Power Supply | 100 – 240 V, 50/60 Hz |
| Input Power | 13 W (operational), 0.8 W (standby) |
| Motor Output | 9 W |
| Speed Accuracy | ±2 % at 1500 rpm (no load, 25 °C) |
| Illumination Intensity | up to 15,000 lx |
| Stir Bar Compatibility | 20 – 80 mm length |
| Included Accessories | IKAFLON® 30 & 40 magnetic stirring bars, USB A–B cable |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | KMO2 Basic |
| Instrument Type | Magnetic Stirrer |
| Max. Stirring Volume | 5 L (H₂O) |
| Speed Range | 0–1100 rpm |
| Heating Function | None |
| Workplate Material | Stainless Steel 1.4301 |
| Workplate Dimensions | 140 × 120 mm |
| Motor Input Power | 14 W |
| Motor Output Power | 4 W |
| Overall Dimensions | 140 × 75 × 200 mm |
| Weight | 1.4 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | 80 % |
| Protection Class | IP21 (DIN EN 60529) |
| Voltage | 230 / 115 / 100 V |
| Frequency | 50/60 Hz |
| Total Input Power | 20 W |
| Max. Stir Bar Length | 50 mm |
| Mounting Interface | M10 for H16V support stand |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | lab disc meadow |
| Stirrer Type | Magnetic Stirrer |
| Max Stirring Volume (H₂O) | 0.8 L |
| Speed Range | 15–1500 rpm |
| IP Rating | IP65 |
| Operating Temperature Range | 5–40 °C |
| Relative Humidity Limit | 80 % |
| Input Voltage | 100–240 V AC, 50/60 Hz |
| Input Power | 5 W |
| Motor Output Power | 3 W |
| Max Stir Bar Length | 25 mm |
| Plate Material | Polyester Film |
| Plate Diameter | Ø100 mm |
| Dimensions (W × H × D) | 117 × 12 × 180 mm |
| Weight | 0.3 kg |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | Lab disc |
| Stirring Points | 1 |
| Max. Stirring Volume (H₂O) | 0.8 L |
| Speed Range | 15–1500 rpm |
| Stir Bar Max. Length | 25 mm |
| Plate Material | Polyester Film |
| Plate Diameter | Ø 90 mm |
| Dimensions (W × H × D) | 114 × 12 × 161 mm |
| Weight | 0.3 kg |
| Ambient Temp. | 5–40 °C |
| Relative Humidity | ≤80 % |
| Protection Class | IP65 |
| Explosion Protection | Ex II 3G EEx nC IIB T6, DIN EN 60529 |
| Voltage | 100–240 V AC |
| Frequency | 50/60 Hz |
| Input Power | 5 W |
| Motor Output Power | 3 W |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | lab disc white |
| Motor Output Power | 3 W |
| Max. Stirring Volume (H2O) | 0.8 L |
| Speed Range | 15–1500 rpm |
| Max. Stir Bar Length | 25 mm |
| Plate Material | Polyester Film |
| Plate Diameter | Ø 100 mm |
| Dimensions (W × H × D) | 116 × 12 × 175 mm |
| Weight | 0.599 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | 80 % |
| Ingress Protection | IP65 |
| Voltage Input | 100–240 V AC |
| Frequency | 50/60 Hz |
| Total Power Consumption | 5 W |
| Direction Reversal Interval | Every 30 s |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | LAB DISC WHITE |
| Instrument Type | Magnetic Stirrer |
| Maximum Stirring Volume (H₂O) | 0.8 L |
| Speed Range | 15–1500 rpm |
| Motor Output Power | 3 W |
| Input Power | 5 W |
| Working Plate Material | Polyester Film |
| Plate Diameter | Ø 100 mm |
| Dimensions (W × H × D) | 116 × 12 × 175 mm |
| Weight | 0.599 kg |
| IP Rating | IP65 |
| Operating Temperature | 5–40 °C |
| Relative Humidity Limit | 80 % |
| Voltage | 100–240 V AC |
| Frequency | 50/60 Hz |
| Max. Stir Bar Length | 25 mm |
| Max. Load Capacity | 1.5 kg |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer Type | Manufacturer |
| Origin Category | Imported |
| Model | Lab Disc White |
| Instrument Type | Magnetic Stirrer |
| Maximum Stirring Volume | 0.8 L |
| Speed Range | 15–1500 rpm |
| Temperature Control | None |
| Stirring Point Count | 1 |
| Motor Output Power | 3 W |
| Max Stir Bar Length | 25 mm |
| Plate Material | Polyester Film |
| Plate Diameter | 100 mm |
| Dimensions (W × H × D) | 117 × 12 × 180 mm |
| Weight | 0.599 kg |
| Ambient Operating Temperature | 5–40 °C |
| Relative Humidity Limit | 80 % |
| Protection Rating | IP65 |
| Voltage | 100–240 V AC |
| Frequency | 50/60 Hz |
| Input Power | 5 W |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | lab disc white |
| Instrument Type | Magnetic Stirrer |
| Max. Stirring Volume (H₂O) | 0.8 L |
| Speed Range | 15–1500 rpm |
| Temperature Control Range | 5–40 °C |
| IP Rating | IP65 |
| Power Input | 5 W |
| Motor Output | 3 W |
| Max. Stir Bar Length | 25 mm |
| Plate Material | Polyester Film |
| Plate Diameter | 100 mm |
| Dimensions (W × H × D) | 117 × 12 × 180 mm |
| Weight | 0.3 kg |
| Ambient Operating Temperature | 5–40 °C |
| Relative Humidity Limit | ≤80 % |
| Protection Standard | DIN EN 60529 |
| Voltage | 100–240 V AC |
| Frequency | 50/60 Hz |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | LabDisc |
| Stirring Capacity | 0.8 L (H₂O) |
| Speed Range | 15–1500 rpm |
| IP Rating | IP65 |
| Operating Temperature | 5–40 °C |
| Relative Humidity Limit | 80 % |
| Power Input | 5 W |
| Power Output | 3 W |
| Max Stir Bar Length | 25 mm |
| Plate Material | Polyester Film-Coated Aluminum |
| Plate Diameter | Ø100 mm |
| Dimensions (W × H × D) | 117 × 12 × 180 mm |
| Weight | 0.3 kg |
| Compliance | DIN EN 60529 |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA Werke GmbH & Co. KG |
| Type | Magnetic Stirrer |
| Model | Maxi MR 1 |
| Maximum Stirring Volume | 150 L (H₂O) |
| Speed Range | 0–600 rpm |
| Display | LED/LCD Digital Speed Readout |
| Timer Function | 0–56 min or Continuous Operation |
| Motor Input Power | 80 W |
| Motor Output Power | 35 W |
| Max Stir Bar Length | 155 mm |
| Plate Material | Stainless Steel 1.4301 (AISI 304) |
| Plate Dimensions | 500 × 500 mm |
| Overall Dimensions | 505 × 110 × 585 mm |
| Weight | 16 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | ≤80 % RH |
| Ingress Protection | IP21 |
| Voltage | 230 V / 100–120 V |
| Frequency | 50/60 Hz |
| Compliance | DIN EN 60529 |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer Type | Manufacturer |
| Product Category | Imported |
| Model | Maxi MR 1 digital |
| Instrument Type | Magnetic Stirrer |
| Maximum Stirring Volume | 150 L (H₂O) |
| Speed Range | 0–600 rpm |
| Motor Output Power | 35 W |
| Stir Bar Max Length | 155 mm |
| Working Plate Material | Stainless Steel 1.4301 |
| Plate Dimensions | 500 × 500 mm |
| Timer Range | 0–56 min (or continuous) |
| Interface | RS 232 and USB |
| Protection Rating | IP21 |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | ≤80 % |
| Input Voltage | 230 V / 100–120 V |
| Frequency | 50/60 Hz |
| Input Power | 80 W |
| Net Weight | 21.36 kg |
| Dimensions (W × H × D) | 505 × 110 × 585 mm |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | Maxi MR 1 |
| Display | LED digital speed & timer |
| Speed Range | 0–600 rpm |
| Max. Stirring Volume (H₂O) | 150 L per position |
| Stirring Position | 1 |
| Max. Stir Bar Length | 155 mm |
| Motor Input Power | 80 W |
| Motor Output Power | 35 W |
| Plate Material | Stainless Steel 1.4301 |
| Plate Dimensions | 500 × 500 mm |
| Overall Dimensions | 505 × 110 × 585 mm |
| Weight | 16 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | 80 % |
| Protection Class | IP21 (DIN EN 60529) |
| Voltage | 230 V / 100–120 V |
| Frequency | 50/60 Hz |
| Timer Range | 0–56 min or continuous operation |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | MICROSTAR 15 control |
| Max. Stirring Volume (H₂O) | 10 L |
| Motor Input Power | 32 W |
| Motor Output Power | 22 W |
| Drive Principle | Brushless DC Motor |
| Speed Display | LCD |
| Speed Range | 0/30–1000 rpm |
| Max. Viscosity | 20,000 mPa·s |
| Max. Output Power at Shaft | 15.7 W |
| Continuous Duty Cycle | 100 % |
| Max. Torque at Shaft | 15 N·cm |
| Speed Control | Analog Knob |
| Speed Setting Accuracy | ±1 rpm |
| Speed Measurement Deviation | ±1 % (n > 300 rpm), ±3 rpm (n < 300 rpm) |
| Stirrer Shaft Fixation | Fixed Chuck |
| External Temperature Sensor Interface | PT1000 |
| Temperature Display | Yes |
| Chuck Clamping Range | Ø 0.5–8.2 mm |
| Hollow Shaft ID | 8.5 mm |
| Hollow Shaft Insertion (at Standstill) | Yes |
| Support Arm Diameter | 13 mm |
| Support Arm Length | 160 mm |
| Torque Display | Yes |
| Rated Torque | 0.15 N·m |
| Torque Measurement Deviation | ±3 N·cm |
| Timer | Yes |
| Timer Display | LCD |
| Timer Range | 0–6000 min |
| Temp. Range (Sensor) | −10 to +350 °C |
| Temp. Measurement Accuracy | 0.1 K |
| PT1000 Accuracy | ±0.5 K (DIN EN 60751 Class A) |
| Temp. Sensor Max. Deviation | ≤ ±(0.15 + 0.002× |
| Housing Material | Cast Aluminum Coating / Thermoplastic Polymer |
| Dimensions (W×H×D) | 60 × 173 × 136 mm |
| Weight | 1.26 kg |
| Ambient Operating Temp. | 5–40 °C |
| Relative Humidity Limit | 80 % |
| Ingress Protection | IP54 |
| USB Interface | Yes |
| Voltage | 100–240 V AC |
| Frequency | 50/60 Hz |
| DC Supply | 24 V = |
| Current Draw | 1300 mA |
| Vibration Detection | Yes (Auto-Shutdown) |
| Bluetooth | Yes |
| Compatible Software | labworldsoft® |
| Key Lock Function | Yes |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA-Werke GmbH & Co. KG |
| Product Type | Electronic Overhead Stirrer |
| Max. Mixing Volume (H₂O) | 5 L |
| Speed Range | 30–1000 rpm |
| Temperature Control Range | –10 °C to 350 °C |
| Max. Viscosity | 20,000 mPa·s |
| Motor Output Power | 22 W |
| Max. Torque | 15 N·cm |
| Display | LCD with real-time speed, torque, and temperature |
| Interface | USB, Bluetooth, PT1000 temperature sensor input |
| Protection Rating | IP54 |
| Dimensions (W×H×D) | 60 × 173 × 136 mm |
| Weight | 1.26 kg |
| Ambient Operating Conditions | 5–40 °C, ≤80% RH |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | MICROSTAR 15 digital |
| Max. Stirring Volume (H₂O) | 10 L |
| Motor Input Power | 32 W |
| Motor Output Power | 22 W |
| Drive Type | Brushless DC Motor |
| Speed Display | LED |
| Speed Range | 0/50–1000 rpm |
| Max. Viscosity | 8000 mPa·s |
| Max. Output Power (Stirring Shaft) | 15.7 W |
| Continuous Duty Cycle | 100 % |
| Max. Torque (Shaft) | 15 N·cm |
| Speed Control | Analog Knob |
| Speed Setting Accuracy | ±1 rpm |
| Speed Measurement Deviation | ±1 % (n > 300 rpm), ±3 rpm (n < 300 rpm) |
| Clamp Type | Fixed Chuck |
| Chuck Diameter Range | 0.5–8.2 mm |
| Hollow Shaft ID | 8.5 mm |
| Hollow Shaft Insertion (at standstill) | Yes |
| Extension Arm Diameter | 13 mm |
| Extension Arm Length | 160 mm |
| Rated Torque | 0.15 N·m |
| Timer Display | None |
| Housing Material | Die-cast aluminum with thermoplastic polymer coating |
| Dimensions (W × H × D) | 60 × 173 × 126 mm |
| Weight | 1.26 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | 80 % |
| Ingress Protection | IP54 (per DIN EN 60529) |
| USB Interface | Yes |
| Input Voltage | 100–240 V AC |
| Frequency | 50/60 Hz |
| Standby Power Consumption | 0.3 W |
| DC Supply | 24 V = |
| Current Draw | 1300 mA |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA Werke GmbH & Co. KG |
| Product Type | Digital Overhead Stirrer |
| Model | MICROSTAR 15 digital |
| Maximum Mixing Volume | 10 L (H₂O) |
| Speed Range | 0/50–1000 rpm |
| Motor Type | Brushless DC Motor |
| Max Torque | 15 N·cm |
| Power Input | 32 W |
| Continuous Duty Cycle | 100% |
| Display | LED |
| Speed Accuracy | ±1 rpm (n > 300 rpm), ±3 rpm (n < 300 rpm) |
| Speed Control | Precision Knob |
| Shaft Clamping Range | 0.5–8 mm |
| Hollow Shaft ID | 8.5 mm |
| IP Rating | IP54 |
| Dimensions (W × H × D) | 60 × 173 × 126 mm |
| Weight | 1.26 kg |
| Operating Ambient | 5–40 °C, ≤80% RH |
| USB Interface | Yes |
| Input Voltage | 100–240 V AC, 50/60 Hz |
| Standby Power | 0.3 W |
| DC Output | 24 V =, 1300 mA |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | MICROSTAR 30 control |
| Max. Stirring Volume (H₂O) | 20 L |
| Motor Input Power | 32 W |
| Motor Output Power | 22 W |
| Drive Principle | Brushless DC Motor |
| Speed Display | LCD |
| Speed Range | 0/30–500 rpm |
| Max. Viscosity | 20,000 mPa·s |
| Max. Output Power at Shaft | 15.7 W |
| Duty Cycle | 100 % |
| Max. Torque | 30 N·cm |
| Speed Control | Analog Knob |
| Speed Setting Accuracy | ±1 rpm |
| Speed Measurement Deviation | ±1 % (n > 300 rpm) / ±3 rpm (n < 300 rpm) |
| Clamp Type | Fixed Chuck |
| Chuck Capacity | Ø 0.5–8.2 mm |
| Hollow Shaft ID | 8.5 mm |
| Hollow Shaft Insertion (at standstill) | Yes |
| Extension Arm Diameter | 13 mm |
| Extension Arm Length | 160 mm |
| Torque Display | Yes |
| Rated Torque | 0.3 N·m |
| Torque Measurement Deviation | ±3 N·cm |
| Timer | Yes |
| Timer Display | LCD |
| Timer Range | 0–6000 min |
| Temp. Range (with PT1000) | −10 to +350 °C |
| Temp. Measurement Accuracy | 0.1 K |
| PT1000 Accuracy | ±0.5 K (DIN EN 60751 Class A) |
| Temp. Sensor Max. Deviation | ≤ ±(0.15 + 0.002× |
| Housing Material | Cast Aluminum Coating / Thermoplastic Polymer |
| Dimensions (W×H×D) | 60 × 173 × 136 mm |
| Weight | 1.26 kg |
| Ambient Temp. Range | 5–40 °C |
| Relative Humidity | ≤80 % |
| Protection Rating | IP54 |
| USB Interface | Yes |
| Voltage | 100–240 V AC |
| Frequency | 50/60 Hz |
| DC Supply | 24 V = |
| Current Consumption | 1300 mA |
| Vibration Detection | Yes (Auto-shutdown on excessive vibration) |
| Bluetooth | Yes (via labworldsoft® app) |
| Remote Control Distance | Up to 150 m (site-dependent) |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer Type | Manufacturer |
| Origin Category | Imported |
| Model | MICROSTAR 30 control |
| Instrument Type | Electric Overhead Stirrer |
| Max. Mixing Volume (H₂O) | 20 L |
| Speed Range | 30–500 rpm |
| Temperature Control Range | −10 °C to 350 °C |
| Max. Viscosity | 20,000 mPa·s |
| Motor Output Power | 22 W |
| Torque | 30 N·cm |
| IP Rating | IP54 |
| Dimensions | 60 × 173 × 136 mm |
| Weight | 1.26 kg |
| Power Supply | 100–240 V AC, 50/60 Hz |
| USB Interface | Yes |
| Bluetooth | Yes |
| PT1000 Temperature Sensor Support | Yes |
| Continuous Duty Cycle | 100% |
| Display | LCD with Real-Time Speed/Torque/Temperature |
| Enclosure Material | Anodized Aluminum Housing + Thermoplastic Polymer |
| Shaft Clamp Range | 0.5–8 mm |
| Hollow Shaft Diameter | 8.5 mm (allows probe insertion during standstill) |
| Timer Range | 0–6000 min |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | MICROSTAR 30 digital |
| Max. Stirring Volume (H₂O) | 20 L |
| Motor Input Power | 32 W |
| Motor Output Power | 22 W |
| Drive Type | Brushless DC Motor |
| Speed Display | LED |
| Speed Range | 0/50–500 rpm |
| Max. Viscosity | 20,000 mPa·s |
| Max. Output Power at Shaft | 15.7 W |
| Duty Cycle | Continuous (100 %) |
| Max. Torque at Shaft | 30 N·cm |
| Speed Control | Analog Knob |
| Speed Setting Accuracy | ±1 rpm |
| Speed Measurement Deviation | ±1 % (n > 300 rpm), ±3 rpm (n < 300 rpm) |
| Clamp Type | Fixed Chuck |
| Chuck Jaw Range | 0.5–8.2 mm |
| Hollow Shaft ID | 8.5 mm |
| Hollow Shaft Functionality (Insertion at Standstill) | Yes |
| Extension Arm Diameter | 13 mm |
| Extension Arm Length | 160 mm |
| Rated Torque | 0.3 N·m |
| Timer Display | None |
| Housing Material | Die-cast Aluminum with Thermoplastic Coating |
| Dimensions (W × H × D) | 60 × 173 × 126 mm |
| Weight | 1.26 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | 80 % |
| Ingress Protection | IP54 (per DIN EN 60529) |
| USB Interface | Yes |
| Input Voltage | 100–240 V AC |
| Frequency | 50/60 Hz |
| Standby Power Consumption | 0.3 W |
| DC Supply | 24 V = |
| Current Draw | 1300 mA |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA-Werke GmbH & Co. KG |
| Product Type | Digital Overhead Stirrer |
| Model | MICROSTAR 30 digital |
| Max. Mixing Volume (H₂O) | 20 L |
| Speed Range | 0/50–500 rpm |
| Motor Type | Brushless DC Motor |
| Max. Torque | 30 N·cm |
| Max. Viscosity | 20,000 mPa·s |
| Display | LED |
| Speed Accuracy | ±1 rpm (n > 300 rpm), ±3 rpm (n < 300 rpm) |
| Speed Control | Precision Knob |
| Protection Rating | IP54 |
| Power Supply | 100–240 V AC, 50/60 Hz |
| Dimensions (W × H × D) | 60 × 173 × 126 mm |
| Weight | 1.26 kg |
| Ambient Operating Conditions | 5–40 °C, ≤80 % RH |
| USB Interface | Yes |
| Continuous Duty Cycle | 100 % |
| Shaft Clamp Range | 0.5–8 mm |
| Hollow Shaft ID | 8.5 mm |
| Extension Arm | 160 mm, Ø13 mm |
| Input Power | 32 W |
| Standby Power | 0.3 W |
| DC Output | 24 V = / 1300 mA |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | MICROSTAR 7.5 control |
| Motor Input Power | 32 W |
| Motor Output Power | 22 W |
| Speed Range | 0/30 – 2000 rpm |
| Max. Torque | 7.5 N·cm |
| Max. Viscosity | 4000 mPa·s |
| Max. Volume (H₂O) | 5 L |
| Speed Setting Accuracy | ±1 rpm |
| Speed Measurement Deviation | ±1 % (>300 rpm), ±3 rpm (<300 rpm) |
| Temperature Range (with PT1000) | –10 to 350 °C |
| Temp. Measurement Accuracy | ±0.5 K (DIN EN 60751 Class A) |
| Torque Measurement Deviation | ±3 N·cm |
| Timer Range | 0–6000 min |
| IP Rating | IP54 |
| Dimensions (W×H×D) | 60 × 173 × 136 mm |
| Weight | 1.18 kg |
| Ambient Operating Conditions | 5–40 °C, ≤80 % RH |
| Power Supply | 100–240 V AC, 50/60 Hz |
| USB Interface | Yes |
| Bluetooth | Yes |
| Display | LCD (speed, torque, temperature, timer) |
| Shaft Clamp Range | Ø 0.5–8.2 mm |
| Hollow Shaft ID | 8.5 mm |
| Extension Arm | Ø13 mm × 160 mm |
| Continuous Duty Cycle | 100 % |
| Motor Type | Brushless DC |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Imported Laboratory Equipment |
| Model | MICROSTAR 7.5 control |
| Instrument Type | Electronic Overhead Stirrer |
| Maximum Mixing Volume | 2 L (H₂O) |
| Speed Range | 30–2000 rpm |
| Temperature Control Range | –10 °C to 350 °C |
| Max. Viscosity | 750 mPa·s |
| Max. Torque | 7.5 N·cm |
| Motor Output Power | 22 W |
| Input Power | 32 W |
| Drive Principle | Brushless DC Motor |
| Speed Setting Accuracy | ±1 rpm (n > 300 rpm) |
| Speed Measurement Deviation | ±1% (n > 300 rpm) |
| Temperature Measurement Accuracy | ±0.5 K (DIN IEC 751 Class A, PT1000 sensor) |
| Display | LCD with real-time torque & temperature readout |
| Interface | USB (data logging, firmware update), Bluetooth (labworldsoft® integration) |
| Housing | Anodized aluminum + thermoplastic polymer |
| IP Rating | IP54 |
| Dimensions | 60 × 123 × 110 mm |
| Weight | 1.18 kg |
| Operating Ambient | 5–40 °C, ≤80% RH |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | MICROSTAR 7.5 |
| Max. Volume (H₂O) | 5 L |
| Motor Input Power | 32 W |
| Motor Output Power | 22 W |
| Drive Principle | Brushless DC Motor |
| Speed Display | LED |
| Speed Range | 0/50–2000 rpm |
| Max. Viscosity | 4000 mPa·s |
| Max. Output Power at Shaft | 15.7 W |
| Duty Cycle | 100 % |
| Max. Torque | 7.5 N·cm |
| Speed Control | Analog Knob |
| Speed Setting Accuracy | ±1 rpm |
| Speed Measurement Deviation | ±1 % (n > 300 rpm), ±3 rpm (n < 300 rpm) |
| Clamp Type | Fixed Chuck |
| Chuck Capacity | Ø 0.5–8.2 mm |
| Hollow Shaft ID | 8.5 mm |
| Hollow Shaft Insertion (at standstill) | Yes |
| Extension Arm Diameter | 13 mm |
| Extension Arm Length | 160 mm |
| Rated Torque | 0.075 N·m |
| Timer Display | None |
| Housing Material | Die-cast Aluminum Coated / Thermoplastic Polymer |
| Dimensions (W × H × D) | 60 × 173 × 126 mm |
| Weight | 1.18 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | 80 % |
| Ingress Protection | IP54 (per DIN EN 60529) |
| USB Interface | Yes |
| Supply Voltage | 100–240 V AC |
| Frequency | 50/60 Hz |
| Standby Power Consumption | 0.3 W |
| DC Output | 24 V = |
| Current Draw | 1300 mA |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA Werke GmbH & Co. KG |
| Product Type | Digital Overhead Stirrer |
| Model | MICROSTAR 7.5 digital |
| Maximum Mixing Volume | 5 L (H₂O) |
| Speed Range | 0/50–2000 rpm |
| Motor Type | Brushless DC Motor |
| Max Torque | 7.5 N·cm |
| Max Viscosity | 4000 mPa·s |
| Power Input | 32 W |
| Dimensions (W × H × D) | 60 × 173 × 126 mm |
| Weight | 1.18 kg |
| IP Rating | IP54 |
| Operating Temperature | 5–40 °C |
| Relative Humidity | ≤80 % |
| USB Interface | Yes |
| Voltage | 100–240 V AC, 50/60 Hz |
| Standby Power Consumption | 0.3 W |
| Shaft Clamp Range | 0.5–8 mm |
| Hollow Shaft ID | 8.5 mm |
| Extension Arm Diameter | 13 mm |
| Extension Arm Length | 160 mm |