Textile Industry Specialized Instruments
Filter
Showing 1–30 of 36 results
| Brand | ATI |
|---|---|
| Origin | USA |
| Model | 100X |
| Compliance | NIOSH 42 CFR Part 84, GB 2626–2019, GB 19083, EN 13274-7:2019, ASTM F3502-21, ISO 23328, YY 0469 |
| Aerosol Types | NaCl (salt) or DOP/PAO/paraffin oil |
| Flow Range | 10–170 L/min |
| Filtration Efficiency Range | up to 99.9995% |
| Sampling | 100% isokinetic aerosol sampling |
| Aerosol Reservoir | 3.8 L (1 gal) integrated patented replenishment system |
| Test Area | 100 cm² standard flat-media fixture |
| Configuration Options | Manual, Automatic (PLC-integrated), Hybrid |
| Brand | ATI |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | PMLT |
| Price | USD $100,000 |
| Dimensions (Packaged) | 81 cm × 57 cm × 51 cm |
| Weight (Packaged) | ~41 kg |
| (Unpackaged) | ~26 kg |
| Power Supply | 100–250 V AC, 50/60 Hz |
| Aerosol Agent | Polyalphaolefin-4 (PAO-4) |
| Detection Principle | Near-forward light-scattering photometry |
| Detection Range | 0.0005–100% aerosol penetration |
| Fit Factor Limit | 200,000 |
| Data Interface | RS-232 serial port |
| Brand | Bruker |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor (China Region) |
| Product Category | Imported Instrument |
| Model | minispec mq-Series Polymer Analyzer |
| Pricing | Upon Request |
| Temperature Control Options | Fixed (35–45 °C), Variable (–5 to 65 °C via water bath/heater), Extended Range (–100 to 200 °C via gas-flow system) |
| Pulse Configurations | T₁, T₂, diffusion-weighted (PGSE), gradient-enabled |
| Sample Forms | Liquids, powders, films, tablets, bulk solids |
| Analysis Principle | Time-domain nuclear magnetic resonance (TD-NMR) |
| Brand | Bruker |
|---|---|
| Origin | France |
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | Minispec mqone Spin Finish Analyzer |
| Pricing | Available Upon Request |
| Brand | SDLATLAS |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Manufacturer |
| Country of Origin | China |
| Model | D395 |
| Pricing | Upon Request |
| Brand | Drick |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | DRK812H |
| Display & Control | 7-inch color touchscreen with parallel metal membrane keypad |
| Sample Clamping | Pneumatic clamping system |
| Measurement Range | 0–300 kPa (0–30 mH₂O) |
| optional low-range mode | 0–50 kPa (0–5 mH₂O) |
| Resolution | 0.01 kPa (1 mmH₂O) |
| Accuracy | ≤ ±0.5% F.S. |
| Test Modes | Incremental pressure, constant pressure, flexure-assisted, and water penetration methods |
| Constant-pressure dwell time | 0–99999.9 s (±0.1 s timing accuracy) |
| Total test duration range | 0–9999999.9 s (±0.1 s) |
| Pressurization rate | digitally adjustable from 0.5 to 100 kPa/min (50–10,000 mmH₂O/min) |
| Sample clamp area | 100 cm² |
| Max flow rate | ≤200 mL/min |
| Interface | RS-232 serial port for thermal printer output |
| Power supply | AC 220 V, 50 Hz, 250 W |
| Dimensions (L×W×H) | 380 × 480 × 460 mm |
| Weight | approx. 25 kg |
| Brand | Electrolux |
|---|---|
| Origin | Sweden |
| Model | W555H |
| Application Standard | ISO 5077, ISO 6330, BS EN 25077 / 26330, IEC 60456 |
| Load Capacity | 6 kg |
| Drum Type | Front-loading Horizontal Rotating Drum |
| Power Supply | AC 380–400 V, 50 Hz, 4.4 kW |
| Dimensions (W×D×H) | 595 × 680 × 850 mm |
| Weight | 105 kg |
| Water Level Control | Dual-level + weight-based volumetric dosing |
| Controller | Clarus™ Electronic Programmable Controller |
| Compliance | Fully aligned with H&M MRSL, M&S Protocol P1/P1A/P3A/P12/P91/P99/P99A/P134, IWSTM-31, GB/T 8629 |
| Brand | Fangyuan Instruments |
|---|---|
| Origin | Zhejiang, China |
| Model | YG026PC |
| Force Range | 500 cN to 50,000 N (selectable) |
| Load Resolution | 1/50,000 of full scale |
| Force Accuracy | Class 0.5 (±0.5% of reading at 2–120% of sensor range |
| Maximum Travel | 1100 mm |
| Elongation Resolution | 0.01 mm |
| Effective Width | 420 mm |
| Data Sampling Rate | ≥800 Hz |
| Onboard Storage Capacity | ≥4,000 test records |
| Test Speed | 0.1–1000 mm/min |
| Dimensions (L×W×H) | 850×500×1800 mm |
| Weight | 280 kg |
| Origin | UK |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | FAST Fabric Assessment System |
| Price | USD 16,200 (FOB UK) |
| Brand | GBPI |
|---|---|
| Model | GB-BF20010M |
| Pressure Settings | 3, 5, 7, 14, 20 kPa |
| Test Area | 28.27 cm² (75 mm × 75 mm specimen) |
| Air Supply | Compressed air, regulated to (20 ± 1) kPa |
| Power | AC 220 V, 50 Hz, 100 W |
| Timer Resolution | ±1 s |
| Clamp Torque | 13.5 N·m |
| Retention Mesh | ≥50% open area, ≤5 mm deflection at 20 kPa |
| Construction | Stainless steel test chamber |
| Brand | GBPI |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | GB-KF30010KL |
| Filtration Efficiency Range | 0–99.999% |
| Flow Rate Range | 20–100 L/min |
| Pressure Drop Range | 0–1000 Pa |
| Test Particle Sizes | 0.3 µm, 0.5 µm, 5.0 µm |
| Aerosol Sources | DEHS (oil-based) and 2% NaCl (salt-based) |
| Standard Test Area | 100 cm² |
| Power Consumption | <1500 W |
| Dimensions | 130 × 75 × 157 cm |
| Weight | 250 kg |
| Power Supply | AC 220 V, 50 Hz |
| Brand | GBPI |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | GB-KF30010S |
| Price Range | USD 42,000 – 70,000 |
| Filtration Efficiency Range | 0–99.999% |
| Flow Rate Control | 20–100 L/min |
| Pressure Drop Range | 0–1000 Pa |
| Test Particle Sizes | 0.3 µm, 0.5 µm, 5.0 µm |
| Aerosol Sources | DEHS (Di-Ethyl-Hexyl-Sebacate) and 2% NaCl solution |
| Standard Test Area | 100 cm² (customizable per mask geometry) |
| Dimensions | 130 × 75 × 157 cm |
| Weight | 250 kg |
| Power Supply | AC 220 V, 50 Hz |
| Max Power Consumption | <1500 W |
| Brand | SDL Atlas |
|---|---|
| Origin | Shenzhen, China |
| Manufacturer Type | Manufacturer |
| Country of Origin | China |
| Model | SDL Atlas |
| Pricing | Available Upon Request |
| Brand | James Heal |
|---|---|
| Origin | USA |
| Model | Gyrowash |
| Capacity | 8 or 20 test cups (selectable small/large cup configuration) |
| Standards Compliance | AATCC 61, 86, 132 |
| Temperature Control | Programmable digital controller |
| Sealing System | Chemically resistant PTFE-encapsulated elastomer O-rings |
| Cup Loading Mechanism | Push-and-rotate rotor interface |
| Accessories Compatibility | Multifiber fabric, single-fiber adjacent fabrics, AATCC/ECE detergents, stainless steel balls/balls, PTFE rods, grey scales for staining and color change assessment |
| Brand | Jiada Xiaotian'e |
|---|---|
| Origin | Jilin, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | GDYJ-201SY |
| Detection Limit | 5.00 mg/kg |
| Measurement Range | 0.00–500.00 mg/kg |
| Accuracy | ±5% |
| Compliance | GB/T 2912.1–1998, GB 18401–2001 |
| Analysis Time | ≤15 min per sample |
| Display | Backlit LCD with Chinese interface |
| Control System | Embedded microcontroller |
| Data Functions | Measurement logging, statistical processing, configuration, help, and RS232 communication |
| Sample Prep | Dedicated extraction apparatus + single-use reagent kits |
| Quantitative Output | mg/kg (formaldehyde content in fabric) |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | JQ03A |
| Price Range | USD 7,000 – 14,000 |
| Force Range & Accuracy | 0–200 cN, ±0.1% f.s. |
| Elongation Range & Resolution | ≤150 mm, 0.01 mm |
| Gauge Lengths | 10, 20, 25 mm (software-selectable) |
| Clamping | Pneumatic fiber grippers |
| Tensile Speed | 2–100 mm/min |
| Test Modes | Constant-elongation cyclic tensile, constant-load cyclic tensile, stress relaxation, creep, overload & overtravel protection, auto-zero calibration |
| Data Acquisition | PC-controlled real-time acquisition and curve visualization |
| Compliance Standards | GB/T 9997, GB/T 14337, BS EN ISO 5079:1996 |
| Brand | SDLATLAS |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | D394 |
| Quotation | Upon Request |
| Working Width | 300 mm (12 in) |
| Roller Diameter (Neoprene) | 54 mm (2.125 in) |
| Linear Speed | 25 mm/s (1 in/s) |
| Static Load Capacity | 50 kg (105 lb) ± 2.3 kg (5 lb) |
| Brand | SDLATLAS |
|---|---|
| Model | D394B |
| Roller Width | 450 mm |
| Roller Diameter | 125 mm |
| Roller Hardness | 70 ± 2 Shore A |
| Drive Speed | Fixed at 10 rpm |
| Trough Capacity | ~1000 mL |
| Actuation | Pneumatic Load Control |
| Safety Interlocks | Integrated |
| Compatibility | Optional Air Compressor Supply |
| Integration | Designed for inline coupling with Mini Dryer or Stenter Frame |
| Key | Brand: POWEREACH (Shanghai Zhongchen) |
|---|---|
| Origin | Shanghai, China |
| Model Series | JDS05 |
| Maximum Biaxial Force per Axis | 500 N |
| Force Resolution | 1/10,000 of full scale |
| Optical Magnification | up to 8 pixels/µm |
| Imaging System | Dual-mode illumination (transmitted + movable reflective), continuous zoom long-focus lens |
| Software | Proprietary textile mechanics analysis suite |
| Compliance | Designed for ASTM D5035, ISO 13934-1, ISO 13935-1, GB/T 3923.1, and custom method implementation |
| Computer Interface | USB + RS-232 (COM port required) |
| Brand | POWEREACH (Shanghai Zhongchen) |
|---|---|
| Origin | Shanghai, China |
| Model Series | JQ03 |
| Compliance | ASTM D3822, ISO 5079, GB/T 14337, GB/T 14338, USP <1061> (Fiber Mechanical Testing Guidance) |
| Force Range | 0.1 mN – 500 mN (selectable full-scale ranges) |
| Displacement Resolution | ≤ 0.1 µm |
| Strain Rate Control | 0.01 – 500 mm/min (programmable) |
| Integrated Imaging | 10×–100× motorized zoom optical module with real-time diameter/length measurement |
| Data Acquisition | 10 kHz sampling rate, synchronized force–displacement–image stream |
| Software | POWEREACH FiberTest v4.2 (GLP-compliant audit trail, 21 CFR Part 11 optional module) |
| Brand | POWEREACH (Shanghai Zhongchen) |
|---|---|
| Origin | Shanghai, China |
| Model | JQL04 |
| Max. Measurable Fiber Length | 120 mm |
| Min. Detectable Fiber Diameter | 1 µm |
| Scanning Resolution | 8 pixels/µm |
| High-Speed Imaging | 100 fps |
| Tensile Speed Control | Adjustable |
| Fiber Cross-Sectional & Diameter Variability Analysis | Yes |
| Compliance | ASTM D3822, ISO 5079, GB/T 14337 |
| Brand | POWEREACH (Shanghai Zhongchen) |
|---|---|
| Origin | Shanghai, China |
| Model | JSF08 |
| Force Sensor | 0.9807 N & 4.903 N (NMB Japan), resolution: 0.01% FS |
| Linear Guide Travel | 25 mm, pitch: 0.25 mm |
| Motor Step Resolution | 0.1125°, positional accuracy: 0.068 µm |
| Zoom Stereo Optical System | 0.7×–4.5× |
| Non-contact Optical Imaging Resolution | 8 px/µm |
| Fiber Gauge Length | 0.8 mm |
| CCD | 1.3 MP monochrome digital sensor, 600 TV lines |
| Environmental Control | Optional regulated temperature/humidity chamber integration |
| Software Modules | Creep-relaxation feedback control, side-view imaging, top-view imaging & capture, tensile test logging, in-situ strain mapping |
| Brand | POWEREACH |
|---|---|
| Model | JWQ06 |
| Application | Textile Fiber Mechanical Testing |
| Measurement Principle | Controlled Oscillatory Bending under Tension |
| Sample Type | Individual Filaments (Aramid, Carbon, Glass, UHMWPE) |
| Adjustable Bend Radius | Yes |
| Environmental Operation | Ambient to Elevated/Low Temperatures |
| Tension Monitoring | Real-time Dynamic Tension Measurement during Bending Cycles |
| Control Interface | PC-based Software with RS232/USB Connectivity |
| Compliance Context | ASTM D3822, ISO 5079, GB/T 14337, ISO 1973 (adapted for bending fatigue extension) |
| Software Features | Cycle Counting, Load-Time Curve Logging, Pre-tension Calibration, Angle & Frequency Parameterization |
| Brand | Q-LAB |
|---|---|
| Origin | USA |
| Model | Q-SUN Xe-2 |
| Light Source | 1800 W Air-Cooled Xenon Lamp |
| Spectral Range | Full-spectrum Solar Simulation (UV, Visible, NIR) |
| Irradiance Control | Solar Eye® Closed-Loop Radiometer System |
| Temperature Control | Black Panel Temperature (35–105 °C), Chamber Air Temperature |
| Humidity Control | Standard Relative Humidity (RH) Regulation (Requires Deionized Water) |
| Optional Feature | Water Spray Function (Operates in Light/Dark Cycles) |
| Sample Capacity | 31 Specimens (46 mm × 122 mm) |
| Compliance | ISO 4892-2, ASTM G155, AATCC TM16, ISO 105-B02/B04/B06, GB/T 8427, JIS L0843, SAE J2527, PV 1303, VDA 675242, and >30 Other International Standards |
| Calibration Traceability | NIST-Traceable, ISO/IEC 17025 Accredited Laboratory |
| Connectivity | Built-in Ethernet, Remote Monitoring & Data Logging Support |
| User Interface | Multilingual Controller (EN/FR/ES/IT/DE), Self-Diagnostic Alerts, Virtual Bar Chart Software Integration |
| Brand | SDL Atlas |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Manufacturer |
| Country of Origin | China |
| Model | D398 |
| Pricing | Upon Request |
| Application | Drying, Color Fixation, Baking, Thermosol Processing |
| Form Factor | Benchtop |
| Max Sample Size | 36 × 42 cm |
| Conveyor Mechanism | Automated Pin Chain Drive |
| Dwell Time Range | 10 s – 6 min (adjustable) |
| Heating Power | 6 kW |
| Temperature Range | 20–250 °C |
| Air Circulation | Forced convection fan system |
| Sample Holder | Interchangeable pin frame for variable fabric dimensions |
| Operation Mode | Batch (discontinuous) |
| Compatibility | Compatible with pneumatic padding mangle |
| Brand | SDL Atlas |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Manufacturer |
| Country of Origin | China |
| Model | D440 |
| Pricing | Upon Request |
| Temperature Range | 40–260 °C (105–500 °F) |
| Indication Principle | Thermochromic Phase Transition |
| Adhesion Type | Pressure-Sensitive Self-Adhesive Backing |
| Environmental Resistance | Resistant to Oil, Water, and Saturated Steam |
| Brand | SDL Atlas |
|---|---|
| Origin | USA |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Origin Category | Imported |
| Model | F256A |
| Price Range | USD 14,000 – 70,000 |
| Brand | SDL Atlas |
|---|---|
| Origin | USA |
| Manufacturer | Yes |
| Import Status | Imported |
| Model | M258A-D |
| Measurement Range | 10 mm × 0.01 mm (standard) |
| Anvil Diameter | 30 mm |
| Footprint Options | 50 mm, 100 mm, 200 mm probe span |
| Construction | Aerospace-grade aluminum alloy body |
| Brand | SDL Atlas |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Manufacturer |
| Origin Category | Domestic |
| Model | M292 |
| Price Range | USD 14,000 – 70,000 |
| Brand | SDL Atlas |
|---|---|
| Origin | Shenzhen, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Country of Manufacture | China |
| Model | M228 |
| Price Range | USD 14,000 – 70,000 |
| Wash Canister Options | 8-position or 12-position |
| Canister Volumes | 550 mL or 1200 mL |
| Construction | Full 316 stainless steel housing |
| Control Interface | Full-color capacitive touchscreen |
| Language Support | English, Chinese, Spanish, Turkish |
| Safety Features | Interlocked door switch (rotor stops immediately upon door opening), momentary jog button for rotor positioning |
| Connectivity | RemoteAccess™ mobile monitoring (iOS/Android compatible) |
| Compliance | Designed to meet ISO 105-C06, ISO 105-C08, AATCC Test Method 61, GB/T 3921, and related textile washing fastness standards |