Texture Analyzer
Filter
Showing all 16 results
| Brand | Armfield |
|---|---|
| Origin | United Kingdom |
| Model | FT18MKII |
| Maximum Operating Pressure | 50 bar |
| Membrane Module Options | Ceramic, Spiral-Wound, Hollow-Fiber, Tubular |
| CIP Capability | Yes |
| Backwash Capability | Select Modules |
| Transmembrane Pressure (TMP) Monitoring | Yes (Inlet/Outlet of Retentate & Permeate Lines) |
| Permeate Flow Measurement | Electronic Flowmeter + Optional Mass-Balance Mode |
| Data Logging | Full Sensor Array with Timestamped Export |
| Software Integration | Armfield PC-Based Control & Visualization Suite |
| Brand | Armfield |
|---|---|
| Origin | United Kingdom |
| Model | FT22 |
| Evaporator Tube Length | 1.36 m |
| Heat Transfer Area | 0.08 m² |
| Evaporation Rate | 10 L/h |
| Steam Consumption | 15 kg/h |
| Operating Steam Pressure | 1.7 bar |
| Condenser Area | 0.17 m² |
| Feed Tank Capacity | 30 L |
| Concentrate Tank Capacity | 5.0 L |
| Condensate Tank Capacity | 5.0 L |
| CIP Pump Flow Rate | 8 L/min (20 ft H₂O) |
| System Vacuum | 225 mmHg |
| Power Supply (FT22-A) | 220–240 V / 1-phase / 50 Hz / 3 kW |
| Power Supply (FT22-B) | 120 V / 1-phase / 60 Hz / 3 kW |
| Height | 2.6 m |
| Width | 0.78 m |
| Depth | 0.65 m |
| Gross Weight | 330 kg |
| Shipping Volume | 2.40 m³ |
| Brand | Armfield |
|---|---|
| Origin | United Kingdom |
| Model | FT9 |
| Production Capacity | 45 L/h |
| Maximum Operating Pressure | 70 bar (1015 psi) |
| Homogenization Index (whole milk) | ≤5.0% |
| Feed Tank Capacity | 4.5 L stainless steel (hygienic grade) |
| Pressure Gauge Range | 0–300 bar |
| Motor Power | 0.18 kW |
| Electrical Supply | FT9-A: 220–240 V / 1Φ / 50 Hz |
| FT9-B | 120 V / 1Φ / 60 Hz |
| Dimensions (H×W×L) | 0.56 × 0.56 × 0.41 m |
| Net Weight | 60 kg |
| Material | Hardened stainless steel cylinder, valve, and plunger |
| Homogenization Index compliance | Meets ISO 5530-1 for fat globule size distribution assessment in dairy emulsions |
| Brand | Bosin |
|---|---|
| Model | BS |
| Origin | Shanghai, China |
| Compliance | NY/T 1180–2006 (PRC Agricultural Industry Standard) |
| Max Load Capacity | ≥49 N |
| Force Resolution | ≤0.0098 N |
| Force Accuracy | ±0.02% FS |
| Shear Blade Thickness | 3.0 ± 0.2 mm |
| Blade Included Angle | 60° |
| Triangular Cut Height | ≥35 mm |
| Core Sampler Aperture Width | 4.0 ± 0.2 mm |
| Shear Speed | 1.0 mm/s |
| No-Load Shear Force | ≤0.147 N |
| Calibration Traceability | Certified Standard Weights (±0.1% deviation) |
| Brand | Bosin |
|---|---|
| Model | NS01 |
| Origin | Shanghai, China |
| Force Sensor Capacity | 20 kg (optional: 1/5/10/30/50 kg) |
| Force Accuracy | < ±0.5% FS |
| Load Cell Calibration | Traceable to international standard weights |
| Integrated Weighing Function | 0.1 g resolution |
| Displacement Resolution | 0.01 mm |
| Maximum Travel Distance | 320 mm |
| Test Speed Range | 0.01–20 mm/s (adjustable in 0.01 mm/s increments) |
| Data Acquisition Rate | 20 / 50 / 100 / 200 Hz (user-selectable) |
| Touchscreen Interface | Integrated high-definition capacitive display |
| Safety Features | Emergency stop, mechanical upper/lower limit switches, overload protection |
| Compliance | Designed for GLP-compliant food texture testing per ISO 11036 and ASTM STP 1594 guidelines |
| Brand | Bosin |
|---|---|
| Origin | Shanghai, China |
| Model | TA/VB |
| Unit Price | USD 675 (FOB Shanghai) |
| Probe Type | Dual-Acting Compression-Shear Jaw Fixture |
| Compliance | Designed for ASTM F3102-17 (Standard Test Method for Measuring Textural Properties of Food Using a Texture Analyzer), ISO 11357-4 (Plastics – Differential Scanning Calorimetry), and USP <721> Compendial Requirements for Mechanical Testing of Solid Dosage Forms |
| Brand | Brookfield |
|---|---|
| Origin | USA |
| Model | CT3 |
| Load Capacity Options | 100 g, 1000 g, 1500 g, 4500 g, 10 kg, 25 kg, 50 kg |
| Force Resolution | 0.01–5.0 g (model-dependent) |
| Speed Range | 0.01–10 mm/s (two precision ranges) |
| Position Range | 0–101.6 mm |
| Position Resolution | 0.1 mm (0.01 mm with TexturePro CT software) |
| Accuracy | ±0.5% FSR (load), ±0.1% (speed), ±0.1 mm (position) |
| Compliance | ASTM, ISO, AOAC, AACC, BS 757:1975, GB 6783–1994, USP <1160> |
| Test Modes | Compression, Tension, Bloom, TPA, Hold Time, Cycle Count, Static Load, Surimi |
| Connectivity | USB |
| Software | TexturePro CT (for advanced analysis), Texture Loader (for offline program deployment) |
| Brand | Brookfield |
|---|---|
| Origin | USA |
| Manufacturer Type | Manufacturer |
| Origin Category | Imported |
| Model | CTX |
| Price Range | USD 42,000 – 70,000 |
| Brand | Brookfield |
|---|---|
| Origin | USA |
| Model | CTX |
| Speed Range | 0.01–40 mm/s (in 0.01 mm/s increments for low-speed mode |
| Speed Accuracy | ±0.1% of set speed |
| Displacement Range | 0–280 mm |
| Displacement Resolution | 0.0005 mm |
| Max Test Speed | 10 mm/s at 100 kg load cell |
| Data Acquisition Rate | 500 Hz |
| Load Cell Options | 8 interchangeable sensors (100 g to 100 kg full scale) |
| Base Platform Options | 3 adjustable base configurations |
| Software Compliance | TexturePro software supports 21 CFR Part 11 audit trail and electronic signature capabilities |
| Brand | Jihengpin |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | ZGY-TA |
| Force Range | 1 kg, 5 kg, 10 kg, 20 kg, 30 kg, or 50 kg (standard configuration: 20 kg) |
| Force Accuracy | ±0.5% of full scale |
| Displacement Resolution | 0.01 mm |
| Position Accuracy | 0.001 mm |
| Test Speed Range | 0.1–10 mm/s (software-adjustable) |
| Speed Resolution | 0.1 mm/s (accuracy >99%) |
| Maximum Travel Distance | 320 mm |
| Data Acquisition Rate | >2000 samples/sec (4-channel simultaneous acquisition) |
| Dimensions (W×D×H) | 500 × 500 × 1200 mm |
| Weight | 85 kg |
| Power Supply | 220 V, 50 Hz |
| Standard Configuration | Main unit, proprietary control software, Lenovo PC, HP inkjet printer, three probes (5 mm cylinder, 20 mm cylinder, 25.4 mm flat plunger) |
| Brand | Jihengpin |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | ZGY-TA TPA Universal Texture Analyzer |
| Force Range | 1–50 kg (standard configuration: 20 kg) |
| Force Resolution | 0.01 kg |
| Force Accuracy | ±0.5% of full scale |
| Test Speed Range | 0.1–10 mm/s (software-adjustable) |
| Speed Resolution | 0.1 mm/s (accuracy >99%) |
| Maximum Travel Distance | 320 mm |
| Displacement Resolution | 0.01 mm |
| Dimensions (W×D×H) | 500 × 500 × 1200 mm |
| Weight | 85 kg |
| Power Supply | 220 V, 50 Hz |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Pricing | Available Upon Request |
| Brand | LLOYD |
|---|---|
| Origin | United Kingdom |
| Model | TA1 |
| Maximum Load Capacity | 1 kN (225 lbf) |
| Load Accuracy | ±0.5% of reading from 1% of full scale |
| Sampling Rate | 8 kHz |
| Data Storage | Up to 600 test results |
| Programmable Test Methods | 10 |
| Software | NEXYGENPlus with Excel/Word integration |
| Throat Depth | 180 mm |
| Compliance | ASTM F3107, ISO 11357-4, USP <1141>, GLP/GMP-ready audit trail support |
| Brand | Lloyd Instruments |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | TA1Plus Texture Analyzer |
| Price | Upon Request |
| Force Range | 1 kN |
| Force Accuracy | ±0.5% Rdg |
| Speed Range | 0.01–2032 mm/min |
| Maximum Travel Distance | 500 mm |
| Position Accuracy | ±0.1% of full scale |
| Data Acquisition Rate | 8000 Hz |
| Brand | Shimadzu |
|---|---|
| Origin | Japan |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Origin Category | Imported Instrument |
| Model | EZ Test |
| Price Range | USD 14,000 – 42,000 |
| Brand | Sun Scientific |
|---|---|
| Origin | Japan |
| Model | SD-700II |
| Load Range | 0.01–19.99 N (1–1999 gf) |
| Travel Distance | 90 mm |
| Test Speeds | 30 mm/min, 60 mm/min |
| Display | 4-digit LED (simultaneous force & displacement) |
| Force Resolution | 0.01 N |
| Power Supply | 90–230 VAC, 50/60 Hz |
| Dimensions | W260 × H310 × D205 mm |
| Weight | ~10 kg |
| Output | 0–2 V analog signal, RS-232C interface |
| Compliance | Designed for ISO 11357-3, ASTM F3155, and USP <1141> compliant texture testing workflows |