Thermal Shock Test Chamber
Filter
Showing 151–180 of 319 results
| Brand | OK Instruments |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | OK-TS-6.6 |
| High Temperature Range | +150 °C |
| Low Temperature Range | −50 °C |
| Thermal Shock Range | −50 °C to +150 °C |
| Temperature Stability | ±2 °C |
| Heating Rate | 10 °C/min |
| Cooling Rate | 10 °C/min |
| Brand | OK Instruments |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | OK-TS-8 |
| Price | USD 12,500 (FOB Guangdong) |
| High-Temperature Range | +200 °C |
| Low-Temperature Range | −40 °C |
| Thermal Shock Range | −40 °C to +200 °C |
| Temperature Stability | ±2 °C |
| Heating Rate | 10 °C/min |
| Cooling Rate | 10 °C/min |
| Brand | OK Instruments |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | OK-TS-80 |
| High Temperature Range | +150 °C |
| Low Temperature Range | −40 °C |
| Thermal Shock Range | −40 °C to +150 °C |
| Temperature Stability | ±2 °C |
| Heating Rate | 15 °C/min |
| Cooling Rate | 15 °C/min |
| Brand | OK |
|---|---|
| Model | OK-TS-80 |
| Internal Chamber Dimensions | 50 × 40 × 50 cm (W × D × H) |
| Inner Chamber Material | SUS 304 #8 mirror-finish stainless steel |
| Outer Chamber Material | Electrophoretically coated steel or SUS 304 brushed stainless steel |
| High-Temperature Zone Range | +60 °C to +200 °C |
| Low-Temperature Zone Range Options | A: −55 °C to −10 °C |
| B | −65 °C to −10 °C |
| D | −80 °C to −10 °C |
| Test Zone Temperature Range (Shock) | High: +60 °C to +150 °C |
| Low | A: −10 °C to −40 °C |
| B | −10 °C to −55 °C |
| D | −10 °C to −65 °C |
| Heating Rate | +60 °C to +200 °C in ≤35 min |
| Cooling Rate | +20 °C to −55 °C (A) in ≤75 min |
| Control System | PID-controlled PLC-based touchscreen interface with 96 programmable test profiles |
| Shock Cycle Count | 1–999 cycles |
| Soak Time per Zone | Adjustable up to 999 h 59 min |
| Switching Time (Air Valve) | ≤10 s |
| Temperature Recovery Time | ≤5 min |
| Test Port | Ø50 mm on left side wall |
| Refrigerant | R507 / R23 (zero ozone depletion potential, HFC-based) |
| Safety Protections | Overcurrent, ground fault, compressor high-pressure/low-pressure, overtemperature, phase failure, and emergency power cutoff |
| Brand | OK |
|---|---|
| Model | TS-80 |
| Chamber Configuration | Three-zone (High-Temp Zone / Low-Temp Zone / Test Zone) |
| Temperature Range | -65°C to +150°C |
| Shock Transition Time | ≤10 s (doorless air-path switching) |
| Temperature Recovery Time | ≤5 min (to ±0.5°C of target) |
| Control Accuracy | ±0.1°C (setpoint resolution) |
| Programmable Cycles | 1–999 |
| Soak Time per Zone | 1–999 min |
| Total Programs | 100 |
| Interface | 7-inch color LCD touchscreen with English/Chinese GUI |
| Compliance | GB/T 2423.22, GJB 150.5, IEC 60068-2-14, MIL-STD-810H |
| Refrigerant | R507A / R23 (zero ODP, low GWP) |
| Cooling Method | Water-cooled cascade system |
| Construction | Interior – SUS304 stainless steel |
| Port | One Ø50 mm test port (left side) |
| Safety Protections | Over-temperature, over-current, phase failure, compressor high-pressure/low-pressure, refrigerant leak detection, ground fault, emergency stop |
| Data Logging | RS485 interface with PC-compatible software (real-time curve plotting, audit trail, export to CSV) |
| Brand | OK Instruments |
|---|---|
| Model | OK-TS-80 |
| Internal Chamber Dimensions | 50 × 40 × 50 cm (L×W×H) |
| Internal Material | Mirror-Finished SUS304 Stainless Steel (8K grade) |
| External Material | Electrophoretically Coated Steel or Optional SUS304 Brushed Stainless Steel |
| High-Temperature Zone Range | +60 °C to +200 °C |
| Low-Temperature Zone Range (Configurable) | -55 °C to -10 °C |
| Test Zone Shock Range | +60 °C to +150 °C / -10 °C to -40 °C, -55 °C, or -65 °C |
| Heating Rate | +60 °C to +200 °C in ≤35 min |
| Cooling Rate | +20 °C to -55 °C in ≤75 min |
| Temperature Recovery Time after Shock Transition | ≤5 min |
| Air-Actuated Damper Switching Time | ≤3 s |
| Control System | 7.5" Full-Color LCD Touchscreen HMI with 96 Predefined Test Profiles, Multi-PID Algorithms, and GLP-Compliant Data Logging |
| Power Supply | AC 380 V, 50 Hz |
| Standard Port | One Ø50 mm Test Access Port |
| Safety Compliance | Overcurrent, Overtemperature, Compressor Overheat/Overpressure, Ground Fault, Dry-Heater Protection, Real-Time Fault Diagnostics |
| Brand | OK Instruments |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | OK-TS-80.0..0 |
| High-Temperature Range | 150 °C |
| Low-Temperature Range | −50 °C |
| Thermal Shock Range | −50 °C to 150 °C |
| Temperature Stability | ±2 °C |
| Heating Rate | 10 °C/min |
| Cooling Rate | 10 °C/min |
| Brand | OK Instruments |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic |
| Model | OK-TS-80.000 |
| High Temperature Range | 150 °C |
| Low Temperature Range | −50 °C |
| Thermal Shock Range | −50 °C to 150 °C |
| Temperature Stability | ±2 °C |
| Heating Rate | 10 °C/min |
| Cooling Rate | 10 °C/min |
| Brand | OK Instruments |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | OK-TS-80.001 |
| High-Temperature Range | +150 °C |
| Low-Temperature Range | −50 °C |
| Thermal Shock Range | −50 °C to +150 °C |
| Temperature Stability | ±2 °C |
| Heating Rate | 10 °C/min |
| Cooling Rate | 10 °C/min |
| Brand | OK Instruments |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | OK-TS-80.11 |
| High-Temperature Range | +150 °C |
| Low-Temperature Range | −50 °C |
| Thermal Shock Range | −50 °C to +150 °C |
| Temperature Stability | ±2 °C |
| Temperature Transition Time | ≤10 s (basket transfer) |
| Heating/Cooling Rate (chamber ambient) | 20 °C/s (typical ambient recovery post-transfer) |
| Brand | OK Instruments |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | OK-TS-80.120 |
| High-Temperature Range | +150 °C |
| Low-Temperature Range | −50 °C |
| Thermal Shock Range | −50 °C to +150 °C |
| Temperature Stability | ±2 °C |
| Heating Rate | 10 °C/min |
| Cooling Rate | 10 °C/min |
| Brand | OK Instruments |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | OK-TS-80.22 |
| High Temperature Range | +150 °C |
| Low Temperature Range | −40 °C |
| Thermal Shock Range | −40 °C to +150 °C |
| Temperature Stability | ±2 °C |
| Heating Rate | 20 s (to reach target temperature after transfer) |
| Cooling Rate | 20 s (to reach target temperature after transfer) |
| Brand | OK Instruments |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | OK-TS-80.25 |
| High-Temperature Range | +150 °C |
| Low-Temperature Range | −70 °C |
| Thermal Shock Range | −70 °C to +150 °C |
| Temperature Stability | ±2 °C |
| Transition Time (Hot ↔ Cold) | ≤10 s |
| Heating/Cooling Rate (Chamber Air) | 5 °C/s (typical air temperature ramp in transition phase) |
| Brand | OK Instruments |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | OK-TS-80.33 |
| High-Temperature Range | +150 °C |
| Low-Temperature Range | −40 °C |
| Thermal Shock Range | −40 °C to +150 °C |
| Temperature Stability | ±2 °C |
| Heating Rate | 5 °C/s |
| Cooling Rate | 5 °C/s |
| Brand | OK Instruments |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Manufacturer |
| Origin Category | Domestic |
| Model | OK-TS-9 |
| Price | ¥89,000 |
| High-Temperature Range (°C) | 150 |
| Low-Temperature Range (°C) | -40 |
| Thermal Shock Range (°C) | -40 to 150 |
| Temperature Stability (°C) | ±2 |
| Heating Rate (°C/min) | 10 |
| Cooling Rate (°C/min) | 10 |
| Brand | OK-YT |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 12,500 (FOB) |
| Internal Dimensions (W×H×D) | 40×35×30 cm to 70×60×60 cm |
| External Dimensions (W×H×D) | 145×180×140 cm to 190×170×270 cm |
| Hot Zone Temperature Range | RT to +200 °C |
| Cold Zone Temperature Range | RT to −70 °C |
| Test Zone Temperature Range | +60 °C to +150 °C (hot shock) |
| Temperature Uniformity | ±2.0 °C |
| Temperature Control Accuracy | ±0.5 °C |
| Soak Time (Hot Zone) | ~30 min (RT → +150 °C) |
| Soak Time (Cold Zone) | ~85 min (RT → −70 °C) |
| Recovery Time | <5 min |
| Refrigeration System | Dual-circuit, hermetic/semi-hermetic compressors with R404A/R23 refrigerant blend |
| Interior Material | SUS#304 mirror-finish stainless steel |
| Exterior Material | SUS#304 stainless steel or powder-coated steel |
| Insulation | High-density fire-retardant polyurethane foam |
| Power Supply | AC 380 V ±5%, 50 Hz ±0.5 Hz, 3-phase 5-wire |
| Brand | OK |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 12,500 (FOB) |
| Internal Dimensions (W×H×D) | 40×35×30 cm to 70×60×60 cm |
| External Dimensions (W×H×D) | 145×180×140 cm to 190×170×270 cm |
| Hot Zone Temperature Range | RT to +200 °C |
| Cold Zone Temperature Range | RT to −70 °C |
| Test Zone Temperature Range | +60 °C to +150 °C (hot shock) |
| Temperature Control Accuracy | ±0.5 °C |
| Temperature Uniformity | ±2.0 °C |
| Soak Time (Hot Zone) | ~30 min (RT → +150 °C) |
| Soak Time (Cold Zone) | ~85 min (RT → −70 °C) |
| Recovery Time | <5 min |
| Refrigeration System | Hermetic or Semi-Hermetic Compressor with Eco-Friendly Refrigerants (R404A/R23) |
| Interior Material | Mirror-Finished SUS#304 Stainless Steel |
| Exterior Material | SUS#304 Stainless Steel or Powder-Coated Steel |
| Insulation | High-Density Fire-Retardant PU Foam |
| Power Supply | AC 380 V ±5%, 50 Hz ±0.5 Hz, 3-Phase 5-Wire |
| Interface | LAN Port for Remote Monitoring & Control |
| Compliance Standards | GB/T 2423.1–1989, GB/T 2423.2–1989, GB/T 2423.22–1989, GJB 150.5–1986, GJB 360.7–1987, GJB 367.2–1987 |
| Brand | OK |
|---|---|
| Model | OK-YT-01 / OK-YT-02 / OK-YT-03 |
| Internal Chamber Dimensions (W×H×D) | 15×15×15 cm / 20×15×20 cm / 30×20×30 cm |
| Max. Sample Weight | 2 kg |
| High-Temperature Bath Range | RT to +150 °C |
| Low-Temperature Bath Range | RT to –65 °C |
| Heating Time (RT → 150 °C) | ~30 min |
| Cooling Time (RT → –65 °C) | ~85 min |
| Thermal Transfer Time (Hot ↔ Cold Bath) | ≤10 s |
| Temperature Control Accuracy | ±0.5 °C |
| Test Medium Options | Silicone Oil / Glycol Solution / Chilled Water / Specialized Heat Transfer Fluid |
| Drive Mechanism | Mechanical Actuator with Precision Positioning |
| Refrigeration System | Cascade-Type, Hermetic Compressors (R404A/R23) |
| Inner Chamber Material | SUS304 Stainless Steel |
| Outer Casing | Powder-Coated Steel or Optional Stainless Steel |
| Controller | TEMI880 Touchscreen PID Controller (Bilingual: English/Chinese), 100 Programs × 1000 Segments, RS-232/RS-485 Interface |
| Compliance | Designed for ASTM D5276, IEC 60068-2-14, MIL-STD-810G Method 503.5, and GLP/GMP-aligned data logging capability |
| Brand | OK |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 12,500 (FOB) |
| Internal Dimensions (W×H×D) | 40×35×30 cm to 70×60×60 cm |
| External Dimensions (W×H×D) | 145×180×140 cm to 190×170×270 cm |
| Hot Zone Temperature Range | RT to +200 °C |
| Cold Zone Temperature Range | RT to −70 °C |
| Test Zone Temperature Range | +60 °C to +150 °C (hot shock) |
| Temperature Control Accuracy | ±0.5 °C |
| Temperature Uniformity | ±2.0 °C |
| Recovery Time | <5 min |
| Preheating Time (RT→150 °C) | ~30 min |
| Precooling Time (RT→−70 °C) | ~85 min |
| Refrigeration System | Hermetic or Semi-Hermetic Compressor with Eco-Friendly Refrigerants (R404A/R23) |
| Interior Material | SUS#304 Mirror-Finish Stainless Steel |
| Exterior Material | SUS#304 Stainless Steel or Powder-Coated Steel |
| Insulation | High-Density Fire-Retardant PU Foam |
| Power Supply | AC 380 V ±5%, 50 Hz ±0.5 Hz, 3-Phase 5-Wire |
| Interface | LAN Port for Remote Monitoring & Control |
| Compliance | GB/T 2423.1, GB/T 2423.2, GB/T 2423.22, GJB 150.5, GJB 360.7, GJB 367.2 |
| Brand | OK |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 12,500 (FOB) |
| Internal Dimensions (W×H×D) | 40×35×30 cm to 70×60×60 cm |
| External Dimensions (W×H×D) | 145×180×140 cm to 190×170×270 cm |
| Hot Zone Temperature Range | RT to +200 °C |
| Cold Zone Temperature Range | RT to −70 °C |
| Test Zone Temperature Range | +60 °C to +150 °C (hot shock) |
| Temperature Control Accuracy | ±0.5 °C |
| Temperature Uniformity | ±2.0 °C |
| Soak Time (Hot Zone) | ~30 min (RT → +150 °C) |
| Soak Time (Cold Zone) | ~85 min (RT → −70 °C) |
| Recovery Time | <5 min |
| Refrigeration System | Hermetic or Semi-Hermetic Compressor with Eco-Friendly Refrigerants (R404A/R23) |
| Interior Material | Mirror-Finished SUS#304 Stainless Steel |
| Exterior Material | SUS#304 Stainless Steel or Powder-Coated Steel |
| Insulation | High-Density Fire-Retardant PU Foam |
| Power Supply | AC 380 V ±5 %, 50 Hz ±0.5 Hz, 3-Phase 5-Wire |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 12,500 (FOB) |
| Internal Dimensions (W×H×D) | 40×35×30 cm to 70×60×60 cm |
| External Dimensions (W×H×D) | 145×180×140 cm to 190×170×270 cm |
| Hot Soak Zone Temperature Range | RT to +200 °C |
| Cold Soak Zone Temperature Range | RT to −70 °C |
| Test Zone Temperature Range | +60 °C to +150 °C (hot shock) |
| Temperature Control Accuracy | ±0.5 °C |
| Temperature Uniformity | ±2.0 °C |
| Soak-to-Soak Transition Time | <5 min |
| Hot Zone Preheat Time (RT → 150 °C) | ~30 min |
| Cold Zone Precool Time (RT → −70 °C) | ~85 min |
| Refrigeration System | Hermetic or Semi-Hermetic Compressor with Eco-Friendly Refrigerants (R404A/R23) |
| Inner Chamber Material | SUS#304 Mirror-Finish Stainless Steel |
| Outer Chamber Material | SUS#304 Stainless Steel or Powder-Coated Steel |
| Insulation | High-Density Fire-Retardant PU Foam |
| Power Supply | AC 380 V ±5%, 50 Hz ±0.5 Hz, 3-Phase 5-Wire |
| Brand | OK Instruments |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | OK-YT-01 |
| High-Temperature Range | +150 °C |
| Low-Temperature Range | −50 °C |
| Thermal Shock Range | −50 °C to +150 °C |
| Temperature Stability | ±2 °C |
| Heating Rate | 20 s (to target temp) |
| Cooling Rate | 20 s (to target temp) |
| Brand | OK Instruments |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | OK-YT-015 |
| High-Temperature Range | +150 °C |
| Low-Temperature Range | −45 °C |
| Thermal Shock Range | −45 °C to +150 °C |
| Temperature Stability | ±2 °C |
| Heating Rate | ≥30 °C/min (liquid immersion) |
| Cooling Rate | ≥30 °C/min (liquid immersion) |
| Transfer Time | <10 s |
| Brand | OK Instruments |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | OK-YT-02 |
| High-Temperature Range | +150 °C |
| Low-Temperature Range | −50 °C |
| Thermal Shock Range | −50 °C to +150 °C |
| Temperature Stability | ±2 °C |
| Heating Rate | ≥30 °C/min (liquid immersion) |
| Cooling Rate | ≥30 °C/min (liquid immersion) |
| Transfer Time | <10 s |
| Brand | OK Instruments |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM/ODM Producer |
| Model | OK-YT-03 |
| High-Temperature Range | +150 °C |
| Low-Temperature Range | −50 °C |
| Thermal Shock Range | −50 °C to +150 °C |
| Temperature Stability | ±2 °C |
| Heating Rate | ≥30 °C/min (liquid immersion) |
| Cooling Rate | ≥30 °C/min (liquid immersion) |
| Basket Transfer Time | <10 s |
| Brand | Other Brands |
|---|---|
| Model | OK-TS–100 / OK-TS–250 / OK-TS–500 / OK-TS–1000 |
| Temperature Range | –70 °C to +150 °C (selectable) |
| Temperature Uniformity | ≤ ±2 °C |
| Temperature Fluctuation | ≤ ±0.5 °C |
| Ramp Rate | ≥2–3 °C/min (heat-up), ≤1 °C/min (cool-down) |
| Interior Material | Stainless Steel (AISI 304) |
| Exterior Material | Powder-Coated Baosteel Cold-Rolled Steel |
| Insulation | High-Density Ultra-Fine Glass Fiber |
| Heating System | Nickel-Chromium Alloy Heaters |
| Cooling System | Finned Multi-Stage Evaporator with Single- or Dual-Stage (Cascade) Refrigeration |
| Compressor | Hermetic Tecumseh/Tecumseh-derived “Tecumseh” (France-sourced) |
| Air Circulation | Single-Circuit, Extended-Shaft Low-Noise Stainless Steel Centrifugal Blower |
| Sealing | High-Performance Silicone Rubber Gasket |
| Viewing Window | Double-Layer Tempered Glass with Interior LED Illumination |
| Control System | Imported High-Precision Digital Display Controller with PID Algorithm and Imported Actuators |
| Compliance | Designed per IEC 60068-2-14, ASTM D5229/D5229M, MIL-STD-810H Method 503.7 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 11,200 (FOB) |
| Temperature Range | -65°C to +180°C |
| Thermal Transition Time | ≤15 s (typical between chambers) |
| Control System | TEMI880 Color Touchscreen Controller (English/Chinese Switchable) or TEMI300 Membrane Keypad Controller (English Only) |
| Refrigeration | Twin-Stage or Single-Stage Hermetic Compressor (Original Tecumseh or Copeland) |
| Insulation | Rigid Polyurethane Foam (≥100 mm) + Ultra-Fine Glass Fiber |
| Interior Material | SUS304 Stainless Steel |
| Exterior Finish | Electrostatic Powder-Coated Cold-Rolled Steel or Optional Brushed SUS304 |
| Air Circulation | Wide-Band Forced Convection with Centrifugal Blower |
| Compliance | ASTM D5229, MIL-STD-883 Method 1010, JESD22-A104, IEC 60068-2-14 |
| Brand | SETH |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | SET-B31 |
| High-Temperature Range | +150 °C |
| Low-Temperature Range | −65 °C |
| Thermal Shock Range | −65 °C to +150 °C |
| Temperature Stability | ±2 °C |
| Heating Rate | 30 °C/min |
| Cooling Rate | 30 °C/min |
| Brand | SETH |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | SET-K |
| Price | Upon Request |
| High-Temperature Range | +60 °C to +200 °C |
| Low-Temperature Range | +20 °C to −80 °C |
| Thermal Shock Range | +60 °C to +150 °C |
| Temperature Stability | ±2 °C |
| Heating Rate | 3.5 °C/min |
| Cooling Rate | 1.5 °C/min |