Thermal Shock Test Chamber
Filter
Showing 241–270 of 319 results
| Brand | OEM / Custom Brand |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | −99.9 °C to +200 °C |
| Humidity Control | Steam Humidification, 0–100 % RH |
| Resolution | 0.1 °C / 0.1 % RH |
| Programmable Memory | 120 programs × 1200 segments |
| Cycle Repetition | Up to 999 cycles |
| Control Interface | Touchscreen HMI with BTHC (Balanced Temperature & Humidity Control) |
| Safety Features | SSR-based PID control, PT-100 dual-sensor monitoring, real-time fault diagnostics, power cutoff on critical anomaly |
| Compliance | Designed for ASTM D573, ISO 188, IEC 60068-2-14, MIL-STD-810G thermal shock protocols |
| Brand | OEM |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Cooling System | Dual-Stage Cascade Refrigeration (Water-Cooled) |
| Temperature Range | –70 °C to +180 °C |
| Thermal Transition Time (Typ.) | ≤5 min (–70 °C ↔ +180 °C) |
| Compliance | GB/T 2423.1–2023, GB/T 2423.2–2023, GB/T 10592–2008, GJB 150.3A–2009 |
| Configuration Options | Two-Zone (Lift-Basket) or Three-Zone (Separate Hot/Cold/Testing Chambers) |
| Cooling Water Requirement | 10 m³/h Circulating Flow (External Cooling Tower Required) |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | -20 °C to +80 °C |
| Internal Chamber Dimensions | 40 × 40 × 40 cm (D × W × H) |
| Temperature Resolution | 0.1 °C |
| Temperature Control Accuracy | ±2 °C |
| Refrigeration System | R404A refrigerant |
| Compressor | Imported high-efficiency hermetic scroll compressor |
| Cooling Method | Air-cooled condenser |
| Evaporator | Finned-tube coil type |
| Control System | PID auto-tuning with SSR output |
| Display | LED digital temperature & timer display |
| Safety Protections | Compressor overload protection, earth-leakage circuit breaker |
| Chamber Material | 304 stainless steel interior |
| Optional Features | Dual-sensor temperature control, high-temp active cooling, RS-485/USB communication interface |
| Key Features | Two-zone (hot/cold chambers with basket transfer) or three-zone (hot chamber / cold chamber / test chamber) architecture |
|---|---|
| Temperature Range | Hot Zone up to +200 °C |
| Test Zone | −65 °C to +150 °C |
| Temperature Transition Time | ≤5 min (typical recovery) |
| Uniformity | ±2.0 °C |
| Control Accuracy | ±0.5 °C |
| Refrigeration System | Dual-stage cascade refrigeration with imported semi-hermetic compressors (Germany) |
| Refrigerants | R404A / R23 (ozone-friendly) |
| Insulation | High-density fire-retardant PU foam |
| Interior | Mirror-finish SUS304 stainless steel |
| Exterior | SUS304 or powder-coated steel |
| Power Supply | AC 380 V ±5%, 50 Hz ±0.5 Hz, 3-phase 5-wire |
| Cooling Water Requirement | External cooling tower (10 m³/h capacity required) |
| Compliance | GB/T 2423.1–2001, GB/T 2423.2–2001, GB/T 2423.22–2002, GJB 150.5–86, IEC 60068-2-14, EIA-364-32, QC/T 17–92, SJ/T 10186–91 & 10187–91 |
| Customizable Internal Dimensions | 40×35×30 cm to 70×60×60 cm (W×H×D) |
| Key | Brand: OEM |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 12,500–18,900 (FOB) |
| Temperature Range (Hot Zone) | RT to +200 °C |
| Temperature Range (Cold Zone) | RT to −70 °C |
| Test Zone Range | +60 °C to +150 °C (hot shock) |
| Temp. Uniformity | ±2.0 °C |
| Control Accuracy | ±0.5 °C |
| Refrigeration | Dual-stage cascade system with R404A/R23 refrigerants |
| Construction | Interior—SUS304 mirror-finish stainless steel |
| Insulation | High-density fire-retardant PU foam |
| Power Supply | AC 380 V ±5%, 50 Hz ±0.5 Hz, 3-phase 5-wire |
| Key | Temperature Range Options: −70°C to +150°C |
|---|---|
| Humidity Range | 30–98% RH |
| Humidity Deviation | +2 to −3% RH |
| Temperature Fluctuation | ±0.5°C |
| Temperature Uniformity | ≤±2°C |
| Avg. Ramp Rate | 0.7–1.0°C/min |
| Timer Setting Range | 0–9999 h |
| Power Supply | AC 380 V |
| Internal Material | SUS304 Stainless Steel Mirror Finish |
| External Material | A3 Steel with Powder Coating |
| Observation Window | Embedded Heated Tempered Glass with LED Illumination |
| Test Port | Ø50 mm |
| Compliance | Designed to Support ASTM D5229, ISO 16750-4, IEC 60068-2-14, MIL-STD-810H Thermal Shock Protocols |
| Brand | OEM |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 14,500 (FOB) |
| Temperature Range | −70 °C to +180 °C |
| Transition Time (−40 °C ↔ +125 °C) | ≤15 s (air-to-air, standard configuration) |
| Thermal Soak Time | Adjustable from 1 min to 999 h 59 min per segment |
| Cycle Count | 1–999 cycles programmable |
| Control System | PID-based PLC with auto-tuning |
| Communication Interfaces | RS-232, RS-485, USB, Ethernet (LAN) |
| Compliance | ASTM D5229/D5229M, ISO 16750-4, MIL-STD-810H Method 503.5, IEC 60068-2-14 |
| Brand | OEM / Custom Brand |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 14,500 (FOB) |
| Temperature Range | -65°C to +150°C |
| Transition Time | ≤15 s (between chambers) |
| Internal Volume | Standard 150 L, 250 L, 400 L, or 800 L configurations available |
| Compliance | IEC 60068-2-14, MIL-STD-810H Method 503.5, JIS Z 8702, GB/T 2423.22 |
| Brand | OEM |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Power Supply | 3-Phase 380 VAC, 16 kW |
| Operating Ambient | 15–35 °C, ≤85% RH |
| Weight | ~450 kg |
| Safety Protections | Dual SSR zero-crossing controllers, compressor high-pressure/overload/overcurrent protection, phase-loss & reverse-phase protection, 16A 3P + 1P 6A circuit breakers, dryers, oil separators, refrigerant sight glass |
| Refrigeration System | Hermetic French Tecumseh compressors, eco-friendly R404A/R23 cascade refrigerant, finned condenser with forced-air cooling, multi-stage finned evaporator with auto-capacity modulation |
| Brand | OEM / Custom-Built |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Pricing | USD 11,200 (FOB) |
| Brand | OEM / Custom-Branded |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Pricing | USD 11,200 (FOB) |
| Temperature Transition Time | ≤15 s |
| Temperature Recovery Time | ≤5 min |
| Control Resolution | ±0.1 °C |
| Refrigeration System | Twin-Circuit Cascade Design with Imported French Tecumseh Compressors |
| Construction | Stainless Steel Interior + Powder-Coated Steel Exterior |
| Cooling Medium | Eco-Friendly R404A/R23 Blend |
| Compliance | ISO 16750-4, JEDEC JESD22-A104, MIL-STD-810H Method 503.5, IEC 60068-2-14 |
| Brand | OEM / Custom-Built |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Pricing | USD 11,200 (FOB) |
| Brand | OEM / Generic |
|---|---|
| Origin | Imported |
| Distributor Type | Authorized Reseller |
| Price | USD 11,200 (FOB) |
| Temperature Range | -65°C to +180°C |
| Transition Time (Hot ↔ Cold) | ≤15 s |
| Temperature Recovery Time | ≤5 min |
| Control Resolution | ±0.1°C (Temp), ±1 s (Time) |
| Programmable Memory | 10 programs × 99 segments |
| Power Supply | AC 380 V ±10%, 50 Hz ±1 Hz, 3-phase 4-wire |
| Ambient Operating Conditions | 5–30°C, ≤85% RH |
| Construction | Outer Shell – Brushed SUS304 Stainless Steel |
| Standard Accessories | Multi-layer Heated Defrost Viewing Window, 2 Adjustable Sample Racks, 1 × Ø50 mm Cable Port |
| Safety Protections | Independent Over-Temperature Cut-off, Compressor High-Pressure & Overload Protection, Motor Thermal Overload, Phase Failure/Reverse Phase Detection, Dry-Run Prevention for Heating Elements |
| Key | Temperature Range (Hot Zone): RT to +150 °C (unloaded) |
|---|---|
| Temperature Range (Cold Zone) | RT to −20 °C (unloaded) |
| Temperature Fluctuation | ±1 °C |
| Temperature Uniformity | ±3 °C |
| Ramp Rate (Heating) | ≤25 min (RT → +150 °C, average) |
| Ramp Rate (Cooling) | ≤15 min (RT → −20 °C, average) |
| Low-Temperature Limit | ≤−25 °C |
| Thermal Shock Transition Range | +150 °C ↔ −20 °C |
| Load Capacity | ≤30 kg |
| Temperature Recovery Time | ≤5 min |
| Basket Transfer Time | ≤15 s |
| Power Rating | 13–20 kW (model-dependent) |
| Refrigerant | HFC-based, dual-stage cascade cryogenic system |
| Key | Temperature Range: −70 °C to +150 °C |
|---|---|
| Humidity Range | 20–98% RH |
| Temp. Uniformity | ±1.5 °C |
| Humidity Uniformity | ±3% RH |
| Temp. Stability | ±0.5 °C |
| Humidity Stability | ±2% RH |
| Internal Dimensions (W×H×D) | 600 × 850 × 800 mm |
| External Dimensions (W×H×D) | 1200 × 1700 × 1300 mm |
| Construction | Interior – SUS#304 stainless steel (1 mm thick) |
| Insulation | Rigid polyurethane foam + fiberglass wool |
| Refrigeration System | Hermetic compressor (Tecumseh or equivalent), eco-friendly refrigerant (R404A/R507), air-cooled condenser, fin-tube evaporator, solenoid valve, dryer filter, capillary tube |
| Heating System | U-shaped finned tubular heaters |
| Control System | TEMI880 color touchscreen programmable controller (LCD, bilingual English/Chinese interface, multi-segment PID control, real-time curve display, alarm logging, data export via USB) |
| Power Supply | 3-phase 5-wire 380 VAC ±10% or 2-phase 3-wire 220 VAC ±10% |
| Standard Accessories | Dual-pane tempered glass observation window, φ50 mm test port (left side), two adjustable sample racks, interior fluorescent lighting, four casters with brakes, built-in humidifier tank |
| Safety Protections | Compressor overheat/overcurrent/high-pressure protection, heater dry-run prevention, chamber overtemperature alarm, low-water level detection |
| Key Features | Programmable 7-inch color touchscreen controller (Chinese UI) |
|---|---|
| Temperature Range | -30°C to +150°C / -50°C to +150°C / -65°C to +150°C |
| Temperature Uniformity | ±2.0°C |
| Temperature Stability | ±0.5°C |
| Heating Rate | up to 20°C/min (non-linear average) |
| Cooling Rates | 3 / 5 / 10 / 15°C/min (non-linear average) |
| Refrigeration System | Semi-hermetic or hermetic compressors (European/American origin) |
| Refrigerants | R404A, R23 |
| Insulation | High-density polyurethane foam or ultra-fine glass wool |
| Interior Material | SUS304/2B stainless steel with radius-corner design |
| Exterior Finish | Powder-coated cold-rolled steel |
| Safety Protections | Over-temperature, over-pressure, phase-loss, motor overload, earth leakage, compressor high-temp/overcurrent, grounding terminal |
| Compliance | GB/T 2423.1–1989, GB/T 2423.2–1989, GB/T 2423.34–1993, IEC 60068-2-30 |
| Brand | OEM |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 11,200 (FOB Shanghai, ex-works pricing |
| Temperature Range | -65°C to +180°C (standard) |
| Transition Time | ≤15 s (typical between chambers, per IEC 60068-2-14) |
| Internal Volume | 50 L to 1000 L (customizable) |
| Compliance | IEC 60068-2-14, MIL-STD-810H Method 503.5, ASTM D6279, GB/T 2423.22–2022, GJB 150.5A–2009, QC/T 17–2019 |
| Key | Temperature Range: −70 °C to +150 °C |
|---|---|
| Heating Rate (−20 °C → +100 °C) | ≈35 min |
| Cooling Rate (20 °C → −70 °C) | ≈90 min |
| Inner Chamber Material | 1 mm SUS#304 Stainless Steel |
| Outer Chamber Material | Powder-Coated Cold-Rolled Steel or SUS#304 Brushed Stainless Steel |
| Insulation | Rigid Polyurethane Foam + Glass Wool |
| Refrigeration System | Hermetic Compressor (Tecumseh/France) with Eco-Friendly Refrigerant (R404A/R507) |
| Controller | TEMI880 Color Touchscreen Programmable Temperature/Humidity Controller (LCD, Bilingual English/Chinese Interface, Multi-PID, Curve Monitoring, Alarm Logging) |
| Power Supply | 3φ5W 380 VAC ±10% or 2φ3W 220 VAC ±10% |
| Standard Accessories | Double-Layer Tempered Glass Viewing Window, φ50 mm Cable Port (Left Side), Two Adjustable Sample Racks, Fluorescent Interior Lamp, Four Casters, Integrated Humidifier Tank |
| Safety Protections | Compressor Overheat/Overcurrent/High-Pressure Protection, Dry-Run Prevention for Heaters & Humidifiers, Chamber Over-Temperature Cut-off, Low-Water-Level Alarm |
| Compliance | Designed per IEC 60068-2-14 (Environmental Testing – Part 2-14: Tests – Test N: Change of Temperature) and ASTM D5229/D5229M (Standard Test Method for Moisture Absorption Properties of Polymer Matrix Composite Materials) — Structural and operational architecture supports GLP/GMP-aligned validation protocols. |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 11,200 (FOB) |
| Temperature Range | -70°C to +180°C (typical standard configuration) |
| Thermal Transition Time | ≤15 s (between chambers, typical) |
| Control System | TEMI880 Color Touchscreen (EN/CN Switchable) or TEMI300 Membrane Keypad Controller (English Only) |
| Refrigeration | Twin-Stage or Single-Stage Hermetic Compressor (Original Tecumseh or Danfoss) |
| Internal Volume | Standard 100 L / 200 L / 400 L Options |
| Compliance | Meets ASTM D5229, ISO 16750-4, MIL-STD-810H Method 503.5, IEC 60068-2-14 |
| Brand | OEM / Generic Industrial Grade |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Pricing | USD 11,200 (FOB) |
| Temperature Range | -70°C to +180°C (typical dual-zone configuration) |
| Control System | TEMI880 Color Touchscreen (EN/CN Switchable) or TEMI300 Membrane Keypad Controller (English Only) |
| Refrigeration | Twin-Stage or Dual-Circuit R404A/R23 Cascade System with Original Tecumseh (France) Hermetic Compressor |
| Construction | SUS304B Stainless Steel Exterior, Seamless Welded 304 Stainless Interior |
| Air Circulation | Wide-Band Forced Convection via Multi-Wing Centrifugal Blower |
| Insulation | High-Density Mineral Wool (≥100 mm thickness) |
| Compliance | Designed per IEC 60068-2-14, MIL-STD-810H Method 503.5, GB/T 2423.22 |
| Brand | OEM / Third-Party Manufacturer |
|---|---|
| Origin | Imported (Non-US/EU Designated Origin) |
| Supplier Type | Authorized Distributor |
| Pricing | USD 11,200 (FOB) |
| Control System | TEMI880 Color Touchscreen Controller (English/Chinese Switchable) or TEMI300 Membrane Keypad Controller (English Only) |
| Temperature Range | −70 °C to +180 °C (Standard Configuration) |
| Thermal Transition Rate | ≥10 °C/min (Typical, 5–15 °C/min Adjustable per Profile) |
| Humidity Range | 20–98% RH (Optional with Humidity Module) |
| Internal Volume | 100–1000 L (Configurable) |
| Refrigeration | Twin-Stage or Single-Stage Hermetic Compressor (Original Tecumseh/Tecumseh-derived or “Tecumseh-compatible” Compressor) |
| Insulation | Polyurethane Rigid Foam (≥100 mm Thickness) + Fiberglass Blanket Lining |
| Interior Material | SUS304 Stainless Steel |
| Exterior Material | Powder-Coated Cold-Rolled Steel or Optional SUS304 Brushed Finish |
| Air Circulation | Centrifugal Blower with Wide-Band Forced Convection (Top-Out/Bottom-In Flow Pattern) |
| Compliance | Designed per IEC 60068-2-14, MIL-STD-810H Method 503.5, JIS Z 8701-1998 |
| Brand | OEM / Private Label |
|---|---|
| Origin | Imported |
| Supplier Type | Authorized Distributor |
| Price | USD 11,200 (FOB) |
| Controller Options | TEMI880 color touchscreen (English/Chinese), TEMI300 membrane keypad (English only) |
| Temperature Range | −70 °C to +180 °C |
| Shock Transition Time | ≤5 s (typical between chambers) |
| Internal Volume | Standard configurations from 150 L to 1000 L |
| Compliance | IEC 60068-2-14, MIL-STD-810H, GB/T 2423.22 |
| Refrigeration | Twin-compartment forced-air thermal shock system with dual-stage cascade refrigeration (Copeland/Tecumseh or equivalent), French-made “Tecumseh” hermetic compressors |
| Insulation | Polyurethane rigid foam (≥150 mm thickness) + ultra-fine glass fiber blanket |
| Interior Material | SUS304 stainless steel |
| Exterior Finish | Electrostatic powder-coated cold-rolled steel or optional brushed SUS304 |
| Airflow | Wide-band forced convection (top discharge / bottom intake), centrifugal blower, multi-wing impeller |
| Humidification | Surface evaporation type |
| Safety Protections | Compressor overheat/overcurrent/high-pressure cut-off, dry-run protection for heaters/humidifiers, chamber overtemperature alarm, low-water-level interlock, door seal integrity monitoring |
| Brand | OEM / Generic Industrial Grade |
|---|---|
| Origin | Imported (Non-USA/EU Designated) |
| Manufacturer Type | Authorized Distributor |
| Pricing | USD 11,200 (FOB Origin, Excl. Duties & Freight) |
| Brand | OEM / Custom Brand |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 11,200 (FOB) |
| Temperature Range | −70°C to +180°C |
| Thermal Transition Time (50°C to −50°C or vice versa) | ≤5 min |
| Cycle Count Setting Range | 1–999 cycles |
| Soak Time per Zone | 0–999 h 59 min |
| Test Port | Ø50 mm on left side |
| Control Interface | 7″ Full-Color TFT LCD Touchscreen Controller (English/Chinese) |
| Compliance | ASTM D5229, IEC 60068-2-14, MIL-STD-810H Method 503.5, JIS Z 8707 |
| Brand | OEM / Custom-Built |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Pricing | USD 11,200 (FOB) |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 11,200 (FOB) |
| Compliance | GB/T 2423.1, GB/T 2423.2, GB/T 2423.22, GJB 150.3–150.5, IEC 60068-2-14, SJ/T 10186–10187, QC/T 17, EIA-364-32 |
| Refrigeration Cycle | Dual-stage vapor-compression reverse Carnot cycle with independent high-temp/low-temp circuits |
| Brand | OEM / Custom-Built |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Pricing | USD 11,200 (FOB) |
| Brand | OEM / Custom-Built |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 12,500 (FOB) |
| Temperature Range | −70 °C to +180 °C |
| Test Compartment Volume | Standard 100 L |
| Compliance | IEC 60068-2-14, MIL-STD-202G Method 107, JIS Z 8704, GB/T 2423.22 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 11,200 (FOB) |