Tribological Tester
Filter
Showing 1–30 of 36 results
| Origin | Taiwan |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Manufactured in Taiwan |
| Model | Abrasion Tester 339 |
| Pricing | Available Upon Request |
| Brand | Anton Paar |
|---|---|
| Origin | Austria |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Origin Category | Imported |
| Model | MCR Tribological Tester |
| Instrument Type | Coefficient of Friction Analyzer |
| Maximum Friction Force | 70 N |
| Friction Force Resolution | 0.005 N |
| Maximum Temperature | 600 °C |
| Normal Force Range | 0.1–70 N |
| Normal Force Resolution | 0.005 N |
| Rotational Speed Range | 10⁻⁶–3000 rpm |
| Sliding Velocity Range | 10⁻⁸–3.3 m/s |
| Torque Range | 1 nNm–300 mNm |
| Torque Resolution | 0.1 nNm |
| Oscillation Frequency Range | 10⁻⁷–100 Hz |
| Angular Amplitude Range | 1 µrad to ∞ |
| Angular Resolution | 10 nrad |
| Minimum In-situ Wear Depth Detection | 0.65 µm |
| Electrotribology Capability | Yes (0–4 kV, up to 1 mA) |
| Temperature Control Range (T-BTP module) | −160 °C to +600 °C |
| Humidity Range | 5–95% RH |
| Brand | Anton Paar |
|---|---|
| Origin | Switzerland |
| Manufacturer | Anton Paar GmbH |
| Type | High-Temperature Tribological Tester |
| Model | THT |
| Maximum Friction Force | 20 N |
| Friction Force Resolution | 0.03 mN |
| Maximum Operating Temperature | 1000 °C |
| Rotational Speed Range | 0.3–500 rpm (optional up to 1500 rpm) |
| Maximum Torque | 450 N·mm |
| Compliance Standards | DIN 50324, ASTM G99, ASTM G133 |
| Brand | Anton Paar |
|---|---|
| Origin | Switzerland |
| Manufacturer | Anton Paar GmbH |
| Type | Multifunctional Tribological Tester |
| Model | TRB³ |
| Maximum Normal Force | 60 N |
| Normal Force Resolution (net weight) | Not specified |
| Maximum Friction Force | 20 N (optional 5 N) |
| Friction Force Resolution | 0.015 mN (optional 0.06 mN) |
| Rotational Speed Range | 0.2–2000 rpm (optional up to 600 rpm) |
| Linear Reciprocating Stroke | up to 60 mm |
| Linear Reciprocating Speed | up to 370 mm/s |
| Linear Frequency Range | 0.01–10 Hz |
| Oscillatory Rotational Speed | 0.2–2000 rpm |
| Oscillatory Frequency Range | 0.01–7 Hz |
| Angular Amplitude Range | ±5° to ±150° |
| Angular Resolution | 0.1° |
| Heating Capability | up to 450 °C (dry), up to 150 °C (liquid) |
| Vacuum Level | down to 10⁻⁷ mbar |
| Relative Humidity Control | 15–95% RH |
| Contact Resistance Measurement | up to 1000 Ω |
| Online Wear Depth Measurement (optional) | −2 to +2 mm |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | D2-APG |
| Pricing | Upon Request |
| Test Load | 5 N or 2.5 N |
| Brand | TLS |
|---|---|
| Origin | Spain |
| Model | T-5333 |
| Application | Burst strength testing of paper and paperboard |
| Category | Physical property testing instrument / Tribological tester (burst-specific) |
| Import status | Imported |
| Brand | LienSheng |
|---|---|
| Origin | Taiwan |
| Model | LS-905 |
| Instrument Type | Static Coefficient of Friction Tester |
| Max Inclination Angle | 45° |
| Tilt Rate | 1.5 ± 0.5 °/s |
| Test Block Dimensions | 100 mm (L) × 50 mm (W) × 750 g |
| Sample Platform Size | 125 mm (W) × 280 mm (L) |
| Motor | 110 V, 5 W |
| Overall Dimensions | 400 mm (L) × 350 mm (W) × 350 mm (H) |
| Weight | 2.5 kg |
| Compliant Standards | CNS 13119, TAPPI T815 om-85 |
| Brand | HAIDA INTERNATIONAL |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | HAIDA HD-C529 Coefficient of Friction Tester |
| Instrument Type | Reciprocating Tribological Tester |
| Maximum Friction Force | 0.001–5 N (expandable) |
| Operating Temperature | Ambient (20 ± 10 °C) |
| Control Interface | Touchscreen |
| Test Stroke | 1–200 mm |
| Test Speed | 100 ± 10 mm/min (adjustable) |
| Slider Mass | 200 ± 2 g (customizable) |
| Upper Specimen Size | 63 mm × 63 mm (L × W) |
| Lower Specimen Size | 80 mm × 200 mm (L × W) |
| Force Measurement Accuracy | ±0.02 N |
| Force Range | 0.001–5 N |
| Dimensions (L×W×H) | ≈490 × 320 × 210 mm |
| Weight | ≈18 kg |
| Power Supply | 1Φ AC 220 V |
| Power Consumption | ≈350 W |
| Relative Humidity Limit | <85% RH |
| Brand | HAIDA INTERNATIONAL |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | HAIDA HD-F732 Office Chair Caster Abrasion Tester |
| Instrument Type | Reciprocating Tribological Tester |
| Maximum Applied Load | 122 kg |
| Operating Temperature | Ambient (23 ± 5 °C) |
| Control System | PLC-based |
| Display Interface | 7-inch TFT Touchscreen |
| Adjustable Seat Height Range | 260–400 mm |
| Test Frequency | 10 ± 2 cycles/min |
| Programmable Cycle Count | 1–999,999 cycles |
| BIFMA Load Capacity | 122 kg (including chair structural components) |
| QB/T Load Capacity | 113 kg (including chair structural components) |
| Cylinder Stroke | 800 mm (standard stroke: 762 ± 50 mm) |
| Max Base Diameter | ≤ 780 mm |
| Dimensions (L×W×H) | 2950 × 1050 × 1600 mm |
| Net Weight | ~500 kg (including standard weights) |
| Power Supply | 1∮ AC 220 V, 50/60 Hz |
| Rated Power | ~100 W |
| Data Output | USB 2.0 interface |
| Compliance Standards | BIFMA X5.1-2017 (Sections 16.1–16.2.5), QB/T 2280–2016 (Section 6.6.6) |
| Brand | HAIDA INTERNATIONAL |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | HD-F732-1 |
| Instrument Type | Reciprocating Tribological Tester |
| Operating Temperature | Ambient |
| Load Capacity | 122 kg (standard weight set) |
| Test Speed | 10 ± 2 cycles/min |
| Cycle Count Range | 1–999,999 (user-definable) |
| Power Supply | AC 220 V, 20 A, 50 Hz |
| Power Consumption | 0.8 kW |
| Dimensions (L×W×H) | 2400 × 1600 × 1300 mm |
| Control System | PLC-based with Touchscreen Interface |
| Motion Mechanism | Motor-driven chain-and-sprocket linear reciprocation |
| Weight Loading Method | Pin-mounted砝码 tray with quick-insert safety pins |
| Compliance Standard | BIFMA X5.1-2017 Sections 16.1–16.2 |
| Origin | Tianjin, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | HY-766B |
| Pricing | Available Upon Request |
| Roller Diameter | 150.0 ± 0.2 mm |
| Roller Length | ~500 mm |
| Lateral Traverse per Revolution | 4.2 ± 0.04 mm |
| Test Loads | 2.0 ± 0.1 N, 5.0 ± 0.1 N, 10.0 ± 0.2 N |
| Roller Speed | 40 ± 1 rpm (adjustable) |
| Abrasion Distance | 20.0 ± 0.1 m or 40.0 ± 0.2 m (digitally preset) |
| Display | LCD Controller |
| Sample Rotation Mode | Selectable (Self-Rotating / Non-Self-Rotating) |
| Specimen Holder ID Range | 15.5–16.3 mm (adjustable), Projection Height: 2.0 ± 0.2 mm |
| Holder Axis Tilt | 3° from vertical |
| Holder-to-Roller Axial Offset | ±1 mm |
| Arm Stability | Vibration-free during operation |
| Brand | PCS Instruments |
|---|---|
| Origin | United Kingdom |
| Model | HPR |
| Instrument Type | Reciprocating Tribological Tester |
| Maximum Friction Force | 1–10 N |
| Temperature Range | Ambient to 130 °C |
| Load Range | 1–10 N |
| Contact Pressure | 0–1.4 GPa |
| Frequency Range | 10–200 Hz |
| Stroke Length | 20 µm–1.8 mm |
| Chamber Pressure Range | 10⁻⁵ torr to 10 bar |
| Sample Volume Capacity | 15 mL |
| Chamber Design | Fully Sealed, Removable & Pressure/Vacuum-Retentive |
| Brand | PCS Instruments |
|---|---|
| Origin | United Kingdom |
| Model | MTM-EC |
| Instrument Type | Multi-Functional Tribological Tester |
| Maximum Friction Force | 75 N |
| Temperature Range | Ambient to 150 °C |
| Contact Pressure Range | 0–1.25 GPa (standard), up to 3.1 GPa (optional) |
| Sliding Speed | −4 to +4 m/s |
| Electrochemical Potential Range | ±60 V (high range), ±10 V (low range) |
| Current Range | 0–3.5 A (high), 0–200 mA (low) |
| Measurement Noise | ±120 mV / ±20 mA (high), ±20 mV / ±0.4 mA (low) |
| Sample Volume | 30 mL (10 mL with optional filler kit) |
| Dimensions (H×W×D) | 400 × 400 × 600 mm |
| Weight | 30 kg |
| Brand | POWEREACH (Shanghai Zhongchen) |
|---|---|
| Origin | Shanghai, China |
| Model | JDF05 |
| Instrument Type | Coefficient of Friction Tester |
| Max. Friction Force | Not Specified |
| Friction Force Resolution | mN |
| Compliance | ASTM D1894, ISO 8295, GB/T 10006 |
| Software Interface | USB + RS232 (COM port required) |
| Data Acquisition | Real-time force-time curve, static/dynamic COF calculation |
| Brand | Norman |
|---|---|
| Origin | USA |
| Model | 7-IBB |
| Compliance | ASTM F2357-04 |
| Abrasive Media | 11/16″ paper tape (1800 cycles/roll) or 1/4″ magnetic tape (3400 cycles/roll) |
| Load Options | 55 g, 175 g, 275 g |
| Cycle Counter Range | 0–9999 cycles |
| Import Status | Imported |
| Brand | Red Sun Instrument |
|---|---|
| Origin | Hebei, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | M-200 |
| Instrument Type | Multi-Function Tribological Tester |
| Maximum Friction Force | 20 N |
| Friction Force Resolution | 0.4 mN |
| Maximum Operating Temperature | 45 °C |
| Maximum Test Load | 2000 N |
| Load Accuracy (≥10% FS) | ±2% |
| Load Repeatability (≥10% FS) | ≤2% |
| Friction Torque Range | 0–15 N·m |
| Torque Accuracy (≥10% FS) | ±3% |
| Torque Repeatability (≥10% FS) | ≤3% |
| Lower Specimen Shaft Speed | 200–400 rpm (stepless) |
| Upper Specimen Shaft Speed | 180/360 rpm |
| Axial Travel of Upper Specimen | ±4 mm |
| Time Control Range | 1 s – 9999 min |
| Revolution Count Range | 1 – 999999 |
| Specimen Dimensions | 30 mm × 7 mm × 6 mm |
| Counterface Ring | Ø40 × 10 mm, hardened 45# steel (HRC 40–45), surface roughness Ra ≤ 0.8 µm, concentricity < 0.01 mm |
| Normal Load Options | 196 N (±0.1%), extendable to 392 N |
| Standard Weights | One 4 kg + four 1 kg calibrated masses |
| Water Bath Integration | Yes |
| Power Supply | 120/230 V, 50/60 Hz, 2 A / 1 A |
| Dimensions (L×W×H) | 330 × 500 × 460 mm |
| Weight | 33 kg |
| Compliance Standards | ASTM D3514, D3885, D3886 |
| Brand | Rtec |
|---|---|
| Origin | Switzerland |
| Model | Brake-5000 |
| Instrument Type | Multifunctional Tribological Tester |
| Compliance | SAE J2522, ISO 6310, ASTM G99, ASTM D3702 |
| Drive Configuration | Dual-axis rotational (upper/lower spindle), high-torque motorized actuation |
| Data Acquisition | Real-time synchronized logging of normal load, friction torque, coefficient of friction (μ), sliding velocity, interface temperature, acoustic emission, wear depth, and volumetric wear loss |
| Control Modes | Programmable acceleration/deceleration profiles, constant-speed braking, step-load cycling, environmental conditioning (optional humidity/temperature chamber integration) |
| Software | Rtec Tribos™ v8.2 with GLP-compliant audit trail, FDA 21 CFR Part 11 user role management, and automated report generation per ISO/IEC 17025 requirements |
| Brand | Rtec |
|---|---|
| Origin | Switzerland |
| Model | FFT-1 |
| Instrument Type | Reciprocating Friction and Wear Tester |
| Maximum Normal Load (Fz) | Up to 5000 N |
| Maximum Test Temperature | 500 °C |
| Compliance | ISO 19291, ASTM E2789, ASTM D6425, ASTM D7421, ASTM D5707, ASTM D5706, ASTM D7594, DIN 51834-2/3/4 |
| Environmental Control | Integrated temperature chamber (−40 °C to 500 °C), optional humidity control |
| Sensor Integration | Displacement sensor, Acoustic Emission (AE) sensor, Contact Resistance sensor |
| Software | Real-time closed-loop control with customizable test scripting, statistical data reporting, GLP-compliant audit trail, FDA 21 CFR Part 11 ready configuration |
| Brand | Rtec |
|---|---|
| Origin | Switzerland |
| Model | MBT-5000 |
| Instrument Type | Multifunctional Tribological Tester |
| Load Capacity | Up to 10 kN (customizable) |
| Motion Modes | Continuous Rotation & Oscillatory Motion |
| Temperature Control | Integrated Heating & Real-time Monitoring |
| Electrical Contact Resistance (ECR) Testing | Supported (programmable current/voltage) |
| Force Sensor | High-resolution capacitive tribometer |
| Software | Fully Integrated Control, Data Acquisition, and Analysis Suite with Logic-Based Test Termination |
| Compliance | Designed for ASTM D3702, ISO 20808, ISO 7148-1, and GLP/GMP-aligned data audit trails (21 CFR Part 11-ready configuration available) |
| Brand | Rtec |
|---|---|
| Origin | Switzerland |
| Model | MFT-4000 |
| Instrument Type | Multi-Function Tribological Tester |
| Application Focus | Biomaterials Evaluation |
| Brand | Rtec |
|---|---|
| Origin | Switzerland |
| Model | MFT-5000 |
| Maximum Friction Force | 3000 N |
| Friction Force Resolution | 0.1 mN |
| Maximum Temperature | 1200 °C |
| Load Range | 1 mN – 12,000 N |
| XY Stage Travel | X = 150 mm, Y = 210 mm |
| Positional Resolution | 0.1 µm (XY), 0.25 µm / 10 nm (Z) |
| Rotational Speed | 0.001 – 10,000 rpm |
| Reciprocating Frequency | up to 70 Hz |
| Stroke Range | 0.1 – 40 mm |
| Environmental Chamber Range | −120 °C to 1200 °C, 5–95% RH, vacuum down to 10⁻⁷ Torr, corrosive/atmospheric/gas/liquid/humidity/high-pressure options |
| In-situ 3D Topography | Confocal + White-Light Interferometry + Dark/Bright Field |
| Brand | Rtec |
|---|---|
| Origin | Switzerland |
| Model | MFT-5000-EC |
| Instrument Type | Multifunctional Tribological Tester |
| Max Normal Load | 5000 N |
| Friction Force Resolution | 5 mN |
| Max Operating Temperature | 500 °C |
| Temperature Control Range | −25 to 150 °C |
| Humidity Control Range | 10–95 % RH |
| Reciprocating Frequency | 0.1–60 Hz |
| Reciprocating Stroke | up to 25 mm |
| Rotational Speed (CW) | 0.1–3000 rpm |
| Rotational Speed (CCW) | 0.001–100 rpm |
| Minimum Sliding Velocity | 0.1 µm/s |
| Electrochemical Configuration | Three-electrode system (working, counter, reference) |
| Liquid Circulation | Dynamic and passive |
| Environmental Chamber | Electrically insulated, splash-resistant |
| Brand | Rtec |
|---|---|
| Origin | Switzerland |
| Model | MFT-5000-H |
| Maximum Normal Load | 12,000 N |
| Friction Force Resolution | 20 µN |
| Maximum Operating Temperature | 1200 °C |
| Motion Modes | Rotational & Reciprocating |
| Atmosphere Options | Inert Gas (N₂, Ar) |
| Thermal Drift Compensation | Active Cooling & Sensor Isolation |
| Compliance | ASTM G99, ISO 20808, ASTM D3702, ISO 7148-1 |
| Brand | Rtec |
|---|---|
| Origin | Switzerland |
| Model | MFT-5000-SST |
| Maximum Normal Load (Fz) | 5000 N |
| Friction Force Resolution | 5 µN |
| Maximum Operating Temperature | 150 °C |
| Environmental Chamber Compatibility | Salt Fog (ASTM B117, ISO 9227 compliant) |
| Brand | Rtec |
|---|---|
| Origin | Switzerland |
| Model | MFT-EF |
| Type | Multifunctional Tribological Tester |
| Category | Import Instrument |
| Distributor Type | Authorized General Distributor |
| Pricing | Available Upon Request |
| Brand | Rtec |
|---|---|
| Origin | Switzerland |
| Model | MPT-3000 |
| Maximum Friction Force | 8000 N |
| Friction Force Resolution | 0.15 N |
| Maximum Test Temperature | 150 °C |
| Brand | Rtec |
|---|---|
| Origin | Switzerland |
| Model | MVT-2 |
| Instrument Type | Multi-Functional Tribological Tester |
| Maximum Friction Force | 200 N |
| Friction Force Resolution | 0.25 µN |
| Temperature Range | −150 °C to +400 °C (with vacuum) |
| Environmental Control | High-Vacuum Compatible (≤10⁻⁶ mbar), Integrated Cryogenic Cooling & Anti-Condensation System |
| Load Control | Closed-Loop Servo-Driven, Programmable Constant/Linear Ramp Force |
| Motion Control | Precision Servo Motor, Adjustable Rotational/Linear Speed Profile |
| Data Acquisition | Multi-Channel, High-Speed (≥10 kHz), Low-Noise Controller |
| Software | Real-Time Control & Post-Processing Suite with ASTM/ISO Compliant Reporting Templates |
| Compliance | Supports GLP/GMP Audit Trail (21 CFR Part 11 Ready), ISO 20808, ASTM G99, ASTM D3702, ISO 7148-1 |
| Brand | Rtec |
|---|---|
| Origin | Switzerland |
| Model | Slurry-Jet |
| Instrument Type | Multi-Functional Tribological Tester |
| Application Category | Erosion & Erosion-Corrosion Testing |
| Compliance Context | ASTM G73, ASTM G119, ISO 8501-1, ISO 12944-5 |
| Brand | Rtec |
|---|---|
| Origin | Switzerland |
| Model | TM-2000 |
| Instrument Type | Multi-Function Tribological Tester |
| Speed Range | ±6 m/s |
| Contact Configuration | 19.05 mm steel ball vs. 46 mm steel disc |
| Control System | Closed-loop servo-driven |
| Temperature Control | Real-time, programmable |
| Data Output | Load, traction force, velocity, SRR, film thickness (optional module) |
| Compliance | ASTM D5001, ISO 12156-1, DIN 51834 (applicable modes) |
| Brand | Rtec |
|---|---|
| Origin | Switzerland |
| Model | TRT-1000 |
| Maximum Friction Force | 8000 N |
| Friction Force Resolution | 0.15 N |
| Maximum Test Temperature | 150 °C |
| Drive Type | Dual High-Torque Servo Motors |
| Force Actuation | Electromechanical Servo Loading |
| Environmental Control | Integrated Temperature Chamber (–20 °C to 150 °C) |
| Data Acquisition Rate | Up to 200 kHz |
| Compliance | ASTM D4170, ISO 6856, DIN 51819-1, EN 15380, GLP-Compatible Logging |