Universal Testing Machine
Filter
Showing 1–30 of 35 results
| Brand | A&D |
|---|---|
| Origin | Japan |
| Model | MCT-1150 |
| Type | Electromechanical Universal Testing Machine |
| Maximum Load Capacity | 2.5 kN |
| Effective Travel | 850 mm (STB-1225L) / 550 mm (STB-1225S) |
| Crosshead Speed Range | 0.05–1000 mm/min (adjustable in 0.01 mm/min increments) |
| Speed Accuracy | ±0.5% |
| Load Measurement Accuracy | ±1% of reading (within 1/1 to 1/500 of sensor rated capacity) |
| Automatic Load Range Switching | Up to 128× |
| Load Calibration | One-touch electronic calibration with integrated sensor diagnostics |
| Overload Protection | Yes |
| Travel Limiters | Dual-position (upper/lower) mechanical stops |
| Position Resolution | 0.001 mm (≤10 mm), 0.01 mm (>10 mm) |
| Dimensions (L×H×W) | 470 × 1450 × 335 mm (STB-1225L) / 470 × 1050 × 335 mm (STB-1225S) |
| Weight | 56 kg / 43 kg |
| Power Supply | AC 100 V, 1Φ, 50/60 Hz |
| Power Consumption | 350 VA |
| Operating Environment | 5–40 °C, 20–80 % RH |
| Data Acquisition Rate | 0.2 ms (with TACT interface) |
| Display | Optional full-color touchscreen interface |
| Control | PC-based test setup and execution |
| Brand | A&D |
|---|---|
| Origin | Japan |
| Type | Electromechanical Universal Testing Machine |
| Model | RTF |
| Load Accuracy | ±0.5% of reading (1/1 to 1/500 full scale) |
| Sampling Rate | 1 ms |
| Input Channels | Up to 13 |
| Drive System | Brushless AC servo motor with vector control |
| Transmission | Preloaded precision ball screw |
| Load Cell | ORIENTEC high-accuracy strain-gauge sensor |
| Frame Rigidity | Enhanced by 30% vs. prior generation |
| Optional | Full-color capacitive touchscreen HMI |
| Brand | A&D |
|---|---|
| Origin | Japan |
| Model | RTF-2325 / RTF-2430 / RTF-1325 |
| Accuracy Class | 0.5 |
| Load Capacity Range | 1 kN to 300 kN |
| Test Width | 420 mm / 590 mm |
| Crosshead Speed | 0.0005–500 mm/min or 0.0005–1000 mm/min |
| Load Accuracy | ±0.5% of reading (standard), ±1% of reading (optional range) |
| Sampling Interval | 1 ms |
| Input Channels | Up to 13 |
| Display | Optional full-color capacitive touchscreen with real-time force-displacement curve plotting |
| Data Storage | ≥10 preconfigured test profiles with auto-save/resume on power cycle |
| Test Modes | Tensile, Compression, Flexural, Peel, Cyclic, Creep, Stress Relaxation |
| Brand | A&D |
|---|---|
| Origin | Japan |
| Model | STB-1225L / STB-1225S |
| Max Load | 2.5 kN |
| Effective Stroke | 850 mm (STB-1225L) / 550 mm (STB-1225S) |
| Crosshead Speed Range | 0.05–1000 mm/min |
| Speed Resolution | 0.01 mm/min |
| Speed Accuracy | ±0.5% |
| Load Accuracy | ±1% of reading (within 1/1 to 1/500 of sensor rated capacity) |
| Auto Range Switching | up to 128× |
| Load Calibration | one-button sensor-integrated calibration with sensor identification |
| Overload Protection | yes |
| Travel Limiters | dual (upper/lower) |
| Dimensions (L×H×W) | 470×1450×335 mm (L) / 470×1050×335 mm (S) |
| Weight | 56 kg (L) / 43 kg (S) |
| Power Supply | AC 100 V, 1Φ, 50/60 Hz, 350 VA |
| Operating Environment | 5–40 °C, 20–80 %RH |
| Key | Brand: All Precision Instrument |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | BWN-5-10KN |
| Max Load Capacity | 10 kN |
| Accuracy Class | 0.5 |
| Force Measurement Range | 0.4–100% of full scale |
| Force Resolution | 1/200,000 of full scale (fixed, no range switching) |
| Effective Test Width | 400 mm (customizable) |
| Effective Tensile Travel | 800 mm (customizable) |
| Test Speed Range | 50–300 mm/min |
| Displacement & Strain Measurement Accuracy | ±0.5% of reading |
| Drive System | Servo Motor + Precision Ball Screw |
| Power Supply | 220 V / 380 V, 50 Hz |
| Power Consumption | 0.75 kW (typical) |
| Net Weight | ~300 kg |
| Compliance | GB/T 16491–2008, ASTM E4, ISO 7500-1, EN 10002-2 |
| Brand | OEM |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 630 (FOB) |
| Standards Compliance | ISO 2759, ASTM D2210, TAPPI T403, GB/T 6545, JIS L1004/L1018/L1031, QB/T 1057 |
| Drive System | Taiwan-made AC frequency-controlled motor |
| Load Cell | U.S.-sourced explosion-proof precision load cell (±0.5% FS) |
| Actuation | Precision ball screw vertical drive |
| Pressure Medium | High-stability silicone oil (replaces glycerin-water mixture) |
| Clamping | Pneumatic sample holder with calibrated pressure gauge |
| Display & Control | Backlit LCD interface with embedded microcontroller |
| Data Storage | 50-test non-volatile memory |
| Output | Integrated thermal printer |
| Safety | Emergency stop switch, automatic return-to-home post-failure |
| Test Modes | Burst strength, constant-load hold (stack compression simulation) |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 650 (approx.) |
| Standards Compliance | ASTM D2210, TAPPI T403, ISO 2759, GB/T 6545, JIS L1004/L1018/L1031, K6328, P8131/P8112 |
| Brand | Generic |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 630 (FOB) |
| Standards Compliance | ISO 2759, ASTM D2210, TAPPI T403, GB/T 6545, JIS L1004/L1018/L1031, QB/T 1057 |
| Test Principle | Hydraulic (Silicone Oil-Based) Diaphragm Bursting |
| Clamping Method | Pneumatic Dual-Plate Clamp |
| Display | High-Resolution LCD with Onboard Data Storage (50 Tests) |
| Output | Integrated Thermal Printer |
| Safety | Emergency Stop Button, Real-Time Air Pressure Gauge |
| Sample Thickness Range | Up to 18 mm |
| Repeatability | ≤±2.0% (per ISO 2759 Annex B) |
| Brand | OEM |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 630 (FOB) |
| Standards Compliance | ISO 2759, ASTM D2210, TAPPI T403, GB/T 6545, JIS L1004/L1018/L1031, QB/T 1057 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Model | LXJ-Capacity |
| Maximum Load | 35–200 kg |
| Number of Test Stations | 4–64 |
| Acceleration Range | 30–200,000 m/s² |
| Specimen Height Limit | 200–300 mm |
| Test Axes | X, Y, Z (independently configurable) |
| Mounting Radius (from rotation center) | 200–1000 mm |
| Startup Time | ≤3–5 min |
| Continuous Operation Duration | 30–60 min |
| Power Supply | AC 380 V, 1.5–6.5 kVA |
| Dimensions (L×W×H) | 924×910×1242 mm to 1953×470×993 mm |
| Slip Ring Configuration | 15-channel, 500 V / 5 A |
| Weight | 1000–2300 kg |
| Compliance Standards | GJB 150, GJB 360, GJB 548, GB/T 2423, MIL-STD-202F, MIL-STD-810F, MIL-STD-883C, IEC 60068-2-27 |
| Brand | Guance Instruments |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | NDH-B3 |
| Instrument Type | Electronic Universal Testing Machine |
| Arc On/Off Time Accuracy | < ±1 ms |
| Voltage Regulation Capacity | 3 kVA |
| High-Voltage Transformer Capacity | 3 kVA, 0–20 kV Output |
| Rated Test Voltage | 12.5 kV |
| Voltage Accuracy | ±1% |
| Current Control Accuracy | ±3% |
| Current Measurement Accuracy | ±1.5% |
| Electrode Force on Specimen | (0.5 ± 0.05) N |
| Electrode Material | Tungsten Rod |
| Electrode Spacing | (6.35 ± 0.1) mm (IEC), (6.0 ± 0.1) mm (ASTM) |
| Ambient Temperature | (23 ± 2) °C |
| Ambient Humidity | (50 ± 5)% RH |
| Input Power | 220 V AC / 50 Hz |
| Output Voltage Range | 0–17.5 kV AC |
| Test Current Settings | 10, 20, 30, 40 mA |
| Brand | HESON |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | HS-3000A-S (Rubber Tensile Testing Machine) |
| Instrument Type | Electromechanical Universal Testing Machine |
| Maximum Load Capacity | 1 kN |
| Effective Test Height | 600 mm |
| Force Sensor | Transcell (USA), 5 kN capacity |
| Drive System | Panasonic AC Servo Motor & Controller (Japan) |
| Force Resolution | ±1/500,000 |
| Force Measurement Range | 0.4–100% of full scale |
| Force Accuracy | ±0.5% of reading |
| Displacement Resolution | 0.05 mm |
| Displacement Accuracy | ±0.5% of reading |
| Strain Resolution | ±1/300,000 F.S. |
| Strain Measurement Range | 0.2–100% F.S. |
| Strain Accuracy | ±0.5% of reading |
| Speed Range | 0.001–500 mm/min (infinitely variable, segmented control) |
| Speed Accuracy | ±1% (at <0.01 mm/min) |
| Force Rate Control Range | 0.5–6% FS/s |
| Force Rate Accuracy | ±1% of set value |
| Strain Rate Control Range | 0.2–6% FS/s |
| Strain Rate Accuracy | ±1% (at <0.05% FS/s) |
| Power Supply | AC 220 V, 50 Hz |
| Software | Proprietary bilingual (Chinese/English) test software with GLP-compliant audit trail and report generation |
| Brand | HESON |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | HS-3002C-S (300 kN Bolt Pull-Out & Universal Testing Machine) |
| Instrument Type | Electromechanical Universal Testing Machine |
| Load Capacity | 300 kN |
| Effective Test Height | 800 mm |
| Force Units | gf, kgf, N, kN, lbf, MPa |
| Force Sensor | Transcell (USA), 300 kN |
| Drive System | Panasonic AC Servo Motor & Controller (Japan) |
| Force Resolution | ±1/500,000 |
| Force Measurement Range | 0.4–100% FS |
| Force Accuracy | ±0.5% of reading |
| Displacement Resolution | 0.05 mm |
| Displacement Accuracy | ±0.5% of reading |
| Strain Resolution | ±1/300,000 FS |
| Strain Measurement Range | 0.2–100% FS |
| Strain Accuracy | ±0.5% of reading |
| Speed Range | 0.001–100 mm/min (stepless, segmented control) |
| Speed Accuracy | ±1% (<0.01 mm/min) |
| Force Rate Control Range | 0.5–6% FS/s |
| Force Rate Accuracy | ±1% of set value |
| Strain Rate Control Range | 0.2–6% FS/s |
| Strain Rate Accuracy | ±1% (<0.05% FS/s) |
| Power Supply | AC 220 V, 50 Hz |
| Dimensions (W×D×H) | ~800 × 400 × 1800 mm |
| Weight | ~300 kg |
| Software | Integrated bilingual (English/Chinese) test software with real-time curve plotting, report generation, and audit-ready data export |
| Brand | Jinhuatester |
|---|---|
| Model | BLD-01 |
| Test Principle | 180° peel adhesion measurement per ASTM D3330, ISO 8510-2, and GB/T 2792 |
| Load Capacity | 200 N (standard) |
| optional ranges | 5 N, 10 N, 30 N, 50 N, 100 N, 300 N |
| Accuracy Class | 0.5 |
| Force Resolution | 0.001 N |
| Speed Range | 1–500 mm/min (infinitely variable) |
| Effective Travel | 330 mm |
| Displacement Resolution | 0.01 mm |
| Specimen Width Range | < 55 mm |
| Peel Angle | 180° horizontal |
| Power Supply | AC 220 V, 50 Hz |
| Power Consumption | 30 W |
| Dimensions (L×W×H) | 635 × 300 × 200 mm |
| Net Weight | 22 kg |
| Brand | Lloyd Instruments |
|---|---|
| Origin | USA |
| Model | LD30 |
| Maximum Load Capacity | 30 kN (6,744 lbf) |
| Column Spacing | 452 mm (17.8 in) |
| Standard Crosshead Travel | 1070 mm (42 in) |
| Extended Crosshead Travel | 1669 mm (65.7 in) |
| Drive System | AC Servo Motor with Preloaded Ball Screw |
| Load Cell Type | Interchangeable Spoke-Type Load Cells |
| Compliance | CE Certified |
| Software | NEXYGENPlus with Built-in Standards Library |
| Frame Stiffness | High-Rigidity Dual-Column Architecture |
| Ease of Use | Intuitive Setup, Low Maintenance Design |
| Brand | Lloyd |
|---|---|
| Origin | USA |
| Model | LD10 |
| Maximum Load Capacity | 10 kN (2248 lbf) |
| Column Spacing | 452 mm (17.8 in) |
| Crosshead Travel (Standard) | 1070 mm (42 in) |
| Crosshead Travel (Extended) | 1669 mm (65.7 in) |
| Drive System | AC Servo Motor with Preloaded Ball Screw |
| Load Cell | Interchangeable Spoke-Type Sensor |
| Compliance | CE Certified |
| Software | NEXYGENPlus with Built-in Standards Library |
| Frame Stiffness | High-Rigidity Dual-Column Architecture |
| Ease of Use | Intuitive Setup, Low Maintenance |
| Brand | NCS |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | GNT100 |
| Instrument Type | Electromechanical Universal Testing Machine |
| Max Test Load | 100 kN |
| Accuracy Class | 0.5 |
| Force Measurement Range | 0.4–100% FS (full-scale, no range switching) |
| Force Resolution | 1/500,000 of full scale, constant across entire range |
| Force Indication Error | ±0.5% of reading |
| Deformation Measurement Range | 0.2–100% FS |
| Deformation & Displacement Indication Error | ±0.5% of reading |
| Displacement Resolution | 0.016 µm |
| Crosshead Speed Range | 0.001–500 mm/min (infinitely variable) |
| Force Control Rate Range | 0.005–5% FS/s |
| Strain Rate Range | 0.02–5% FS/s |
| Closed-Loop Control Modes | Constant Force, Constant Strain, Constant Displacement (0.5–100% FS) |
| Speed Accuracy | ±0.2% of set value (0.01–500 mm/min) |
| Effective Tensile Space | 800 mm |
| Effective Test Width | 600 mm |
| Dimensions (H×W×D) | 1921 × 1997 × 660 mm |
| Software Platform | LZCX-800, Windows 7-based, open architecture, graphical UI, multi-method support (tension, compression, bending, shear), unit conversion (N, kN, gf, kgf, lbf, mm, in), real-time stress–strain plotting |
| Protection Functions | Overload, mechanical limit, overcurrent, overvoltage, overtemperature |
| Control Interchange | Seamless, shock-free transition among force, strain, and displacement control modes |
| Brand | OKE |
|---|---|
| Origin | China (Dongguan) |
| Manufacturer Type | OEM/ODM Manufacturer |
| Compliance | ASTM D2210, TAPPI T403, ISO 2759, GB/T 6545, JIS L1004/L1018/L1031, QB/T 1057 |
| Test Range | 0–6000 kPa (typical for standard bursting strength testers) |
| Resolution | 1 kPa |
| Accuracy | ±0.5% FS |
| Clamping Area | 31.4 cm² (Φ63.5 mm circular diaphragm) |
| Hydraulic Pressure System | Pneumatically actuated diaphragm with closed-loop pressure control |
| Brand | TLS |
|---|---|
| Origin | Spain |
| Model | T-2911 |
| Type | Import |
| Distributor Type | Authorized General Distributor |
| Pricing | Available Upon Request |
| Brand | Ray-Ran |
|---|---|
| Origin | United Kingdom |
| Model | X100 |
| Load Capacity | 1 kN |
| Load Accuracy | ±0.5% of reading down to 0.1% of sensor full scale |
| Effective Travel | 420 mm / 670 mm |
| Vertical Clearance | 600 mm / 850 mm |
| Position Resolution | 0.0001 mm |
| Speed Range | 0.001–2000 mm/min |
| Speed Accuracy | ±0.1% at steady state |
| Maximum Speed at Full Load | 2000 mm/min |
| Data Acquisition Rate (PC-based) | 500 Hz |
| Interface | USB |
| Frame Type | Single-column, benchtop |
| Frame Stiffness | 5 kN/mm |
| Weight | 24 kg / 26 kg |
| Operating Temperature | −10 °C to +40 °C |
| Power Consumption | 0.2 kW |
| Overload Protection | 800% of sensor capacity |
| Motor & Drive | Brushless servo motor with digital AC servo drive, 20,000 pulses/rev position feedback |
| Guidance System | Cross-roller bearing rails |
| Lead Screw | Preloaded, self-cleaning ball screw, lifetime sealed lubrication |
| Enclosure | Retractable dust shield over lead screw |
| Compliance | ASTM E4, ISO 7500-1, ISO 5893, USP <1041>, FDA 21 CFR Part 11 (software-enabled), GLP/GMP audit trail capable |
| Brand | Ray-Ran |
|---|---|
| Origin | United Kingdom |
| Model | X250-1 / X250-2.5 / X250-3 |
| Load Capacity | 1 kN / 2.5 kN / 3 kN |
| Load Accuracy | ±0.5% of reading, down to 0.1% of sensor full scale |
| Effective Test Stroke | 630 mm / 990 mm / 990 mm |
| Vertical Clearance | 800 mm / 1160 mm / 1160 mm |
| Position Resolution | 1 µm |
| Throat Depth | 108 mm |
| Speed Range | 0.00001–2500 mm/min |
| Speed Accuracy | ±0.1% at steady state |
| Maximum Force at Full Speed | 1 kN / 2.5 kN / 3 kN |
| Data Acquisition Rate | 500 Hz (optional 1000 Hz) |
| Connectivity | Ethernet (USB via adapter optional) |
| Frame Stiffness | 8 kN/mm |
| Weight | 58 kg / 65 kg / 65 kg |
| Operating Temperature | −10 °C to +40 °C |
| Humidity | 10–90% RH (non-condensing) |
| Power Supply | 230 V, 1-phase, 50/60 Hz (115 V option available) |
| Power Consumption | 0.3 kW |
| Brand | Ray-Ran |
|---|---|
| Origin | United Kingdom |
| Model | X350 |
| Load Capacity | 5 kN / 10 kN / 20 kN |
| Load Accuracy | ±0.5% of reading down to 0.1% of sensor full scale |
| Effective Test Stroke | 1100 mm |
| Vertical Clearance | 1275 mm |
| Position Resolution | 1 µm |
| Minimum Speed | 0.00001 mm/min |
| Maximum Speed | 2000 mm/min |
| Speed Accuracy | ±0.1% at full speed under steady-state conditions |
| Crosshead Stiffness | 50 kN/mm |
| Data Acquisition Rate | 500 Hz (optional 1000 Hz) |
| PC Interface | Ethernet (USB via adapter optional) |
| Frame Type | Dual-column, bench-mounted (floor cabinet optional) |
| Weight | 120 kg |
| Operating Temperature | −10 °C to +40 °C |
| Power Consumption | 0.45 kW |
| Overload Protection | Up to 800% of sensor capacity |
| Motor Type | Brushless AC servo motor with 4,000,000 steps/revolution positioning resolution |
| I/O Channels | 6 digital I/O for extensometers, micrometers, calipers, balances, etc. |
| Additional Features | Self-cleaning preloaded ball screws |
| Brand | Ray-Ran |
|---|---|
| Origin | United Kingdom |
| Model | X500 |
| Load Capacity | 25 kN / 30 kN / 50 kN / 100 kN |
| Load Accuracy | ±0.5% of reading, down to 0.1% of sensor capacity |
| Effective Test Stroke | 1025 mm / 1025 mm / 950 mm / 1100 mm |
| Vertical Clearance | 1225 mm / 1225 mm / 1150 mm / 1300 mm |
| Position Resolution | 1 µm |
| Minimum Speed | 0.00001 mm/min |
| Maximum Speed | 1000 mm/min / 1000 mm/min / 1000 mm/min / 500 mm/min |
| Speed Accuracy | ±0.1% at full speed under steady-state conditions |
| Crosshead Stiffness | 120 kN/mm / 120 kN/mm / 220 kN/mm / 400 kN/mm |
| Data Acquisition Rate | 500 Hz (optional 1000 Hz) |
| Connectivity | Ethernet (USB via adapter optional) |
| Frame Type | Dual-column, benchtop-mountable (floor cabinet optional) |
| Weight | 155 kg / 155 kg / 195 kg / 235 kg |
| Operating Temperature | 10–90 °C |
| Power Requirement | 1 kW |
| Brand | Shimadzu |
|---|---|
| Origin | Japan |
| Manufacturer | Shimadzu Corporation |
| Type | Electronic Universal Testing Machine |
| Model | AGX-V2 |
| Compliance | ASTM E1012 Class 10 Alignment |
| Sampling Rate | Up to 10 kHz (0.1 ms interval) |
| Load Accuracy Range | 1/2000 of full scale |
| External Input Channels | Up to 20 (analog/digital) |
| Safety Features | Interlocked polycarbonate safety enclosure, intelligent crosshead collision avoidance, real-time force monitoring,行程 limit switches, self-diagnostic system |
| Software | TRAPEZIUMX-V (5 modular editions) |
| Frame Rigidity | High-stiffness, high-coaxiality architecture |
| Key | Brand: Shimadzu |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Manufacturer |
| Product Origin | Domestic |
| Model | AUTOGRAPH AGS-V Series |
| Load Range | 1 N – 10 kN |
| Load Accuracy Class | 0.5 and 1 (per JIS B 7721, ISO 7500-1, ASTM E4) |
| Brand | Shimadzu |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Manufacturer |
| Product Origin | Domestic (China) |
| Model | Autograph AGS-X2 Series |
| Price Range | USD 35,000 – 63,000 (approx.) |
| Instrument Type | Electromechanical Universal Testing Machine |
| Load Capacity Range | 20 kN to 300 kN |
| Load Accuracy Class | ISO 7500-1 Class 0.5 and Class 1 |
| Brand | Shimadzu |
|---|---|
| Origin | Japan |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Import Status | Imported |
| Model | EZ-Test |
| Instrument Type | Electromechanical Universal Testing Machine |
| Load Capacity Options | 1 N to 5 kN (model-dependent) |
| Maximum Travel | 500 mm (EZ-SX), 920 mm (EZ-LX & EZ-LX HX) |
| Load Accuracy | ±1% of displayed value |
| Test Speed Range | 0.001–2000 mm/min |
| Brand | Shimadzu |
|---|---|
| Origin | Japan |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Origin | Imported |
| Model | MCT Series |
| Load Range | 9.8–1961 mN / 9.8–4903 mN |
| Load Accuracy | ±1% of set or displayed load (whichever is greater) |
| Brand | Shimadzu |
|---|---|
| Origin | Japan |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Origin | Imported |
| Model | UH-X/FX Series |
| Instrument Type | Electro-Hydraulic Servo Universal Testing Machine |
| Load Capacity | 200 kN, 300 kN, 500 kN, 1000 kN, 2000 kN |
| Load Accuracy | ±1.0% of indicated value per range |
| Displacement Control Speed | 0.1 mm/min to maximum test speed |
| Load Control Rate | 0.2–5.0 kN/min |
| Strain Control Rate | 0.1–80 %/min |
| Power Consumption Reduction (UH-500KNXh) | Up to 82% vs. conventional hydraulic systems |
| Noise Level | Optimized low-noise hydraulic power unit (UH-FX) |
| Brand | Thwing-Albert |
|---|---|
| Origin | USA |
| Type | Electromechanical Universal Testing Machine |
| Model | Vantage |
| Force Capacity | 0–1 kN |
| Optional Load Cells | 5 N to 1 kN |
| Force Accuracy | ±0.25% of reading |
| Crosshead Travel | 609.6 mm |
| Vertical Test Space | 89 mm |
| Speed Range | 1.27–1016 mm/min |
| Power Supply | 220 V, 60 Hz |
| Safety Features | Emergency stop button, upper/lower limit switches, overload protection |
| Interface | RS-232 serial port |
| Control Software | MAP (Materials Analysis Program) for Windows |
| Actuation | Electronically controlled pneumatic grips |
| Calibration | Automated electronic zeroing and simplified calibration routine |
| Control Panel | Magnetic, repositionable |