JIUPO MCC300 Mold Incubator

Overview

The JIUPO MCC300 Mold Incubator is a purpose-engineered environmental chamber designed to support reproducible cultivation, isolation, and morphological assessment of filamentous fungi—including Aspergillus, Penicillium, Cladosporium, and other aerobically growing molds—under controlled thermal conditions. Unlike general-purpose incubators, the MCC300 prioritizes long-term thermal stability, minimal spatial gradient deviation, and contamination mitigation—critical requirements for mycological standardization, pharmaceutical stability testing (e.g., USP <61> microbial limits), and ISO 14644-1 compliant cleanroom-adjacent workflows. Its natural convection architecture eliminates forced-air turbulence that may disrupt hyphal development or spore dispersion, while its fully sealed, double-walled construction with polyurethane foam insulation (≥80 mm thickness) ensures low thermal leakage and high energy efficiency over extended operational cycles (up to 720 hours continuously). The unit operates exclusively within the biologically relevant range of 0–70 °C, supporting both psychrophilic mold screening and thermotolerant strain propagation.

Key Features

• Intelligent PID temperature control with 0.1 °C resolution and real-time trend logging—enabling compliance with GLP documentation requirements for parameter traceability.
• Patented dual-path airflow routing: rear-mounted passive exhaust combined with top-mounted recirculation ducts—optimized to minimize vertical and horizontal thermal stratification across all four stainless-steel shelves (each 222 mm high).
• Digital touchscreen interface with multi-segment programmable scheduling—supports up to 8 independent time/temperature profiles per day for simulating diurnal cycles or accelerated aging protocols.
• Integrated safety architecture: over-temperature cutoff (±5 °C above setpoint), sensor fault detection, power-loss recovery with auto-resume functionality, and audible/visual alarm escalation.
• Industrial-grade enclosure: piano-finished exterior, seamless 304 stainless-steel interior, and recessed insulated door with magnetic gasket—designed for corrosion resistance, ease of decontamination (e.g., 70% ethanol or VHP-compatible surfaces), and structural integrity under daily lab use.

Sample Compatibility & Compliance

The MCC300 accommodates standard microbiological formats including Petri dishes (90–150 mm), slant tubes, agar plates in stackable carriers, and multi-well culture trays—without compromising thermal homogeneity. Its 1.3 m² total cultivation area supports parallel processing of ≥120 standard Petri dishes per run. The chamber meets IEC 61000-6-3 (EMC emissions) and IEC 61010-1 (safety for laboratory equipment) standards. While not certified for Class II biosafety, its tight sealing (leak rate <0.5 L/min at 50 Pa differential) and absence of internal fans make it suitable for non-aerosolizing fungal work in ISO 14644-1 Class 7 or better environments. It is routinely deployed in QC labs conducting EP 2.6.12 and USP <51> antimicrobial effectiveness testing where stable, non-vibratory incubation is mandated.

Software & Data Management

The MCC300 includes embedded firmware with local data logging (≥30 days of 1-minute interval temperature history) and optional Wi-Fi connectivity for remote monitoring via the JIUPO LabLink mobile application (iOS/Android). The app provides real-time status dashboards, push notifications for alarm events, and exportable CSV reports compatible with LIMS integration. Audit trail functionality complies with FDA 21 CFR Part 11 requirements when used with role-based user authentication (administrator/operator tiers), electronic signatures, and immutable log archiving. All firmware updates are delivered via secure OTA protocol with SHA-256 signature verification.

Applications

• Mycological identification and colony morphology analysis per CLSI M38-A3 guidelines.
• Environmental monitoring in pharmaceutical manufacturing (EU GMP Annex 1, sterile area classification).
• Fungal spoilage studies in food safety laboratories (ISO 21527-1 enumeration of yeasts and molds).
• Antifungal susceptibility testing using broth microdilution or agar dilution methods.
• Long-term stability assessment of biologics and excipients under elevated humidity-temperature stress (ICH Q1A–Q1E).

FAQ

Does the MCC300 support humidity control?
No—this model is a temperature-only incubator. Humidity regulation requires external humidification systems or alternative models (e.g., JIUPO MH series).
Is the internal chamber autoclavable?
No—the stainless-steel interior is wipe-clean only; components are not rated for steam sterilization.
Can the MCC300 be validated for IQ/OQ/PQ protocols?
Yes—its digital control system provides full parameter logging, calibration certificate support (NIST-traceable PT100 sensor), and documented repeatability (±0.3 °C over 24 h at 25 °C), enabling formal qualification per ASTM E2500.
What is the warranty coverage?
Three years limited parts-and-labor warranty; extended service contracts include annual on-site preventive maintenance and calibration verification.
Is the observation door standard or optional?
The double-layer tempered glass observation window is an optional accessory (Order Code: MCC300-OD); it does not compromise thermal uniformity or seal integrity.