ZOLIX ABC-15/35 Beam Collection Accessory
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | ABC-15/35 |
| Pricing | Upon Request |
Overview
The ZOLIX ABC-15/35 Beam Collection Accessory is a precision-engineered optical safety and alignment component designed for controlled attenuation and spatial containment of unused or stray laser beams in laboratory and industrial optical setups. Operating on the principle of non-specular absorption and multi-angle scattering suppression, the device functions as a high-efficiency beam dump—capturing divergent, reflected, or auxiliary beam paths that would otherwise contribute to background noise, measurement interference, or laser safety hazards. Its core design integrates geometric light-trapping architecture with surface-treated internal walls to minimize retro-reflection and secondary scatter, ensuring compliance with Class 3B and Class 4 laser safety protocols (IEC 60825-1, ANSI Z136.1) when integrated into properly engineered optical benches.
Key Features
- Optimized internal geometry featuring deep, non-parallel helical grooves or matte-black micro-textured surfaces to suppress specular reflection and reduce stray light by >99.9% per bounce
- Dual-aperture configuration (15 mm and 35 mm clear entrance diameters) enabling modular integration with standard kinematic mounts, lens tubes, and beam delivery systems
- Robust aluminum housing with black anodized finish for thermal stability, mechanical rigidity, and EMI shielding compatibility
- Threaded M42×1 and SM1 (1.035″-40) compatible mounting interfaces for seamless coupling with ZOLIX optical rails, translation stages, and collimator assemblies
- No active cooling required; rated for continuous-wave (CW) laser power densities up to 5 W/cm² at 532 nm and 1064 nm (dependent on beam divergence and dwell time)
Sample Compatibility & Compliance
The ABC-15/35 is compatible with free-space laser systems operating across UV–NIR spectral ranges (266 nm – 1550 nm), including diode-pumped solid-state (DPSS), fiber-coupled, and ultrafast Ti:sapphire sources. It supports both collimated and moderately divergent beams (up to ±5° full angle). The accessory meets essential requirements for ISO/IEC 17025-accredited optical laboratories, particularly in contexts involving laser-induced fluorescence (LIF), Raman spectroscopy, interferometry, and optical coherence tomography (OCT) alignment workflows. While not a standalone safety device, its use contributes to adherence with institutional laser safety officer (LSO) protocols and supports documentation for GLP-compliant experimental records.
Software & Data Management
As a passive optical component, the ABC-15/35 requires no firmware, drivers, or software integration. However, it is fully documented in ZOLIX’s Optical System Integration Handbook (v3.2), which includes CAD models (STEP/IGES), mounting torque specifications, and beam path loss estimation tables. Users may reference its dimensional and reflectance data within ZOLIX’s OptoDesign Suite—a MATLAB-based optical layout validation tool used for stray-light budgeting and system-level signal-to-noise ratio (SNR) forecasting. Audit trails for installation and calibration verification can be maintained manually or via LIMS-compatible log templates aligned with FDA 21 CFR Part 11 electronic record guidelines.
Applications
- Termination of rejected beams from polarizing beam splitters, dichroic mirrors, or waveplate-based polarization controllers
- Stray-light management in confocal microscopy illumination paths and widefield fluorescence excitation arms
- Safety-critical beam termination in optical parametric oscillator (OPO) pump rejection and harmonic generation waste paths
- Alignment aid during laser cavity optimization, where temporary beam blocking must avoid back-reflection into gain media
- Integration into automated optical switching modules where mechanical shutters are impractical due to speed or vacuum constraints
FAQ
Is the ABC-15/35 suitable for pulsed laser applications?
Yes—when operated within specified peak power density limits (e.g., <10⁹ W/cm² for nanosecond pulses at 1064 nm); users must verify pulse duration, repetition rate, and focal spot size against ZOLIX’s thermal damage threshold curves.
Can it be used in vacuum environments?
The standard version is not vacuum-rated; however, a UHV-compatible variant (ABC-15/35-V) with stainless steel body and vacuum-compatible surface treatment is available upon request.
Does it require recalibration over time?
No—being a passive, non-optical-element (i.e., no lenses or coatings affecting wavefront), it maintains performance indefinitely unless physically damaged or contaminated.
How does it differ from generic beam dumps?
Unlike absorptive metal cones or water-cooled blocks, the ABC-15/35 prioritizes angular scatter control over raw power handling, making it ideal for low-to-medium power alignment-critical applications rather than high-power industrial ablation setups.
