FARO Vantage Laser Tracker Rental Service

Overview

The FARO Vantage Laser Tracker Rental Service provides on-demand access to a high-precision, portable large-volume coordinate measurement system engineered for industrial metrology applications. Based on the principle of interferometric laser distance measurement combined with high-resolution angular encoders and real-time six-degree-of-freedom (6DoF) target tracking, the Vantage system delivers traceable 3D spatial coordinates with sub-millimeter accuracy across measurement volumes up to 80 meters in diameter. It is designed for dynamic, field-deployable metrology tasks where traditional CMMs or photogrammetry systems lack flexibility or range. The system complies with ISO 10360-12 (laser trackers) and supports calibration traceability to NIST or PTB standards through optional accredited on-site verification.

Key Features

• ActiveSeek™ Target Acquisition: Automatically reacquires and locks onto spherically mounted retroreflectors (SMRs) even after temporary line-of-sight interruption — critical for measurements around obstructions in complex assembly environments.
• 6DoF Handheld Probe Integration: Enables full pose measurement (X, Y, Z, pitch, yaw, roll) without direct line-of-sight, allowing access to confined, occluded, or internal surfaces during inspection or alignment workflows.
• RemoteControls™ Workflow Engine: Supports programmable, repeatable measurement sequences via tablet-based interface — reducing operator dependency and improving consistency across shifts or sites.
• Modular Portability: Compact tripod-mounted design with integrated battery option; total system weight under 25 kg for rapid deployment in factory floors, hangars, or outdoor fabrication yards.
• FARO TrackArm Compatibility: Seamless integration with FARO’s patented Super 6DoF TrackArm hybrid solution for combined long-range tracking and localized tactile probing — ideal for mixed-mode inspection of large structures with fine-detail features.

Sample Compatibility & Compliance

The Vantage Laser Tracker is compatible with standard SMRs (e.g., 0.5″, 1.0″, and 1.5″ diameters), ball bars, and FARO’s proprietary 6DoF probes. It supports measurement of metallic, composite, and painted surfaces typical in aerospace fuselage assemblies, automotive body-in-white structures, wind turbine nacelles, and shipbuilding modules. All rental units undergo pre-deployment functional verification per ASTM E2921–22 (“Standard Practice for Evaluating Performance Characteristics of Laser Trackers”) and include documented uncertainty budgets aligned with ISO/IEC 17025 requirements for measurement service providers. Data generated meets audit readiness criteria for GLP, GMP, and AS9100 Rev D compliance when used within validated procedures.

Software & Data Management

Rental packages include licensed access to FARO SCENE Metrology and CAM2 Measure 10 software suites. These platforms support automated GD&T reporting (per ASME Y14.5–2018), best-fit alignment (RANSAC and iterative closest point algorithms), deviation mapping, and export to industry-standard formats including STEP AP242, IGES, and ASCII point clouds. Audit trails, user access logs, and electronic signatures are configurable to satisfy FDA 21 CFR Part 11 requirements. Calibration certificates, firmware revision history, and software validation reports are provided upon request and archived for the duration of the rental period plus three years.

Applications

• Aircraft Assembly Verification: Real-time alignment of wing-to-fuselage joints, engine mount positioning, and tooling fixture certification across multi-station final assembly lines.
• Robot Kinematic Calibration: Identification and compensation of geometric errors in industrial robot DH parameters using simultaneous multi-point tracking — enabling sub-millimeter absolute positioning repeatability.
• Large-Scale Production Line Commissioning: Re-establishment of datum networks post-transport, horizontal leveling of conveyor rails, and gap/flushness validation between modular production cells.
• Reverse Engineering of Legacy Components: High-density point cloud capture of worn or undocumented tooling, jigs, and dies for CAD model reconstruction and tolerance analysis.
• Heavy Equipment Structural Integrity Assessment: Deformation monitoring of cranes, presses, and turbine foundations under static load conditions using time-series coordinate comparison.

FAQ

What is the minimum rental duration?
The minimum commitment is one hour; however, daily billing applies for all rentals less than 24 hours.
Is on-site technical support included?
Yes — each rental includes remote setup assistance and one day of on-site application engineering support at no additional cost.
Are calibration certificates provided?
A pre-rental system performance verification report is issued; optional ISO/IEC 17025-accredited calibration is available upon request at an additional fee.
Can the system be used outdoors?
Yes — the Vantage is rated IP54 and operates reliably in ambient temperatures from 5 °C to 40 °C; wind speeds up to 15 km/h do not impact measurement stability.
What data security protocols apply to measurement files?
All data remains the sole property of the client; no files are retained by the service provider beyond the rental period unless explicitly authorized in writing for archival or support purposes.