Anyty 3R-PPMC-FL Industrial HD Rotational Borescope with 5″ LCD Display and 6000 mAh Battery

Overview

The Anyty 3R-PPMC-FL is a high-performance industrial rotational borescope engineered for precision visual inspection in confined, inaccessible, or hazardous environments. Designed and manufactured by 3R International Group in Beijing, this device operates on the principle of rigid optical imaging combined with real-time digital video capture via a front-mounted 1-megapixel CMOS sensor. Its core functionality centers on 360° continuous mechanical articulation of the distal tip—enabling full circumferential field-of-view control without repositioning the probe shaft. This capability is critical for comprehensive defect mapping in turbine blades, heat exchanger tubes, aircraft engine casings, and welded pipe joints. Unlike fiber-optic or semi-rigid alternatives, the 3R-PPMC-FL employs a rigid stainless-steel probe architecture that ensures dimensional stability, minimal image distortion, and resistance to mechanical fatigue during repeated insertion cycles. The system integrates a high-brightness, anti-glare 5-inch LCD display with native 800 × 480 resolution, optimized for daylight-readable operation in factory-floor or outdoor maintenance settings.

Key Features

• 360° continuous rotational articulation driven by dual-motor actuation for precise angular positioning and repeatable orientation control
• Modular probe interface supporting rapid mechanical interchange of inspection probes across multiple diameters (standard configurations: Ø4 mm, Ø6 mm, Ø8 mm) — eliminating need for multiple dedicated instruments
• 5-level adjustable white LED illumination system with constant-current regulation to maintain consistent color temperature and luminance across varying battery states
• 6000 mAh high-density lithium-ion battery pack delivering up to 6.5 hours of continuous operation under typical illumination and display brightness settings — validated per IEC 62133 safety standards
• Ruggedized aluminum alloy housing rated IP67 for dust and temporary water immersion resistance; probe sheath compliant with ASTM F2245 for chemical resistance in hydrocarbon-rich environments
• Real-time video output via HDMI 1.4 and USB-C interfaces, supporting simultaneous external monitor feed and host PC acquisition for documentation workflows

Sample Compatibility & Compliance

The 3R-PPMC-FL is compatible with standard NDT access geometries found in aerospace MRO, power generation, and petrochemical infrastructure. Its interchangeable probe design accommodates internal diameters from 6 mm upward, with minimum bend radius of 45 mm for Ø6 mm probes. All optical components meet ISO 10110-7 surface quality specifications for transmitted wavefront error < λ/4 @ 632.8 nm. The instrument complies with electromagnetic compatibility requirements per EN 61326-1:2013 and carries CE marking for use within the European Economic Area. For regulated industries, firmware supports audit-trail logging (user ID, timestamp, probe ID, illumination level) aligned with GLP/GMP documentation practices and FDA 21 CFR Part 11 electronic record integrity principles.

Software & Data Management

The device ships with Anyty VisionSuite v3.2 software for Windows 10/11, enabling frame-capture, video recording (H.264/MPEG-4 AVC), measurement annotation (distance, angle, area), and report generation in PDF/A-1b format. Image metadata includes EXIF-compliant fields: probe serial number, exposure time, white balance mode, and battery voltage at capture. Raw video streams are saved in lossless MJPEG AVI containers for post-processing validation. Data export supports DICOM-SR (Structured Reporting) profiles for integration into enterprise CMMS platforms such as SAP PM or IBM Maximo. Firmware updates are delivered via signed binary packages verified using SHA-256 hash and RSA-2048 signature authentication.

Applications

• Aerospace: Visual inspection of compressor vanes, combustion chamber liners, and landing gear hydraulic lines per SAE ARP4761 guidelines
• Energy: In-service examination of boiler tube welds, steam turbine blade roots, and nuclear coolant piping per ASME BPVC Section V, Article 9
• Automotive: Engine cylinder bore assessment, transmission valve body inspection, and EV battery module cavity verification
• Manufacturing: First-article inspection of machined blind holes, threaded inserts, and additive-manufactured internal channels
• Infrastructure: Sewer lateral joint evaluation, HVAC duct integrity screening, and bridge cable anchor chamber documentation

FAQ

What probe diameters are supported out-of-the-box?
Standard probe options include Ø4 mm (for tight-access applications), Ø6 mm (general-purpose), and Ø8 mm (high-light-output configuration). Custom diameters from Ø3 mm to Ø12 mm are available under OEM agreement.
Is the device suitable for use in explosive atmospheres?
The base unit is not ATEX or IECEx certified. However, intrinsically safe probe variants with Class I, Division 2 rating can be supplied upon request with modified illumination circuitry and thermal derating.
Does the system support calibration traceability?
Yes — optional NIST-traceable calibration kits are available, including resolution test targets (ISO 12233 slanted-edge), illumination uniformity charts, and geometric distortion grids. Calibration certificates reference NPL or PTB-accredited laboratories.
Can video recordings be encrypted for secure data handling?
All recorded media may be AES-256 encrypted at rest using FIPS 140-2 Level 1 validated modules. Encryption keys are managed through Windows Hello or smart card authentication.
What is the warranty coverage and service support structure?
Standard warranty is 24 months parts-and-labor, extendable to 60 months under 3R’s Platinum Service Agreement. Global service centers in Frankfurt, Singapore, and Chicago provide same-day loaner units and 72-hour turnaround for probe repairs.