PerkinElmer AAnalyst 200 Atomic Absorption Spectrometer (Refurbished)

Overview

The PerkinElmer AAnalyst 200 Atomic Absorption Spectrometer is a rigorously refurbished benchtop instrument engineered for high-reliability quantitative elemental analysis in regulated and research laboratory environments. Utilizing flame atomic absorption spectroscopy (FAAS) — and optionally compatible with graphite furnace atomization modules — the system measures trace metal concentrations by quantifying the absorption of characteristic hollow cathode lamp radiation at element-specific wavelengths (typically 190–900 nm). Its true dual-beam stepped optical architecture compensates for source drift and lamp instability in real time, delivering superior baseline stability and measurement reproducibility compared to conventional single-beam systems. The solid-state photodiode array detector enables rapid spectral acquisition and enhanced signal-to-noise ratio, supporting precise calibration across wide dynamic ranges (typically 0.001–100 mg/L, dependent on element and matrix). Designed and originally manufactured in Shelton, CT, USA, the AAnalyst 200 reflects PerkinElmer’s legacy in AA instrumentation engineering, integrating robust mechanical construction with intuitive operational logic.

Key Features

• Large-format color touchscreen interface with context-sensitive navigation — eliminates dependency on external PCs for routine operation and method setup
• Modular plug-and-play design: lamp turret, burner head, nebulizer, and spray chamber are field-replaceable without tools or optical realignment
• Fully automated flame gas control (acetylene/air or nitrous oxide/acetylene), including pressure monitoring, flow regulation, and fail-safe shutdown protocols
• Integrated hardware-level safety interlocks compliant with EN 61010-1 and ANSI Z87.1 standards — monitors flame status, gas supply integrity, and cooling water flow
• Optimized sample introduction system featuring high-efficiency concentric nebulizer and impact bead spray chamber for improved transport efficiency and reduced memory effects
• Pre-aligned hollow cathode lamp (HCL) turret accommodating up to eight lamps; automatic lamp selection and intensity optimization during method execution

Sample Compatibility & Compliance

The AAnalyst 200 supports aqueous and dilute acid-digested samples (e.g., HNO₃, HCl) across environmental, clinical, food safety, and metallurgical applications. It accommodates standard 16-mm borosilicate glass tubes and is compatible with optional autosamplers (e.g., AS-800) for unattended batch analysis. All refurbished units undergo full functional validation per PerkinElmer’s original factory test specifications, including wavelength accuracy verification (±0.1 nm), photometric linearity assessment (R² > 0.999 over 0–2.5 absorbance units), and precision testing (RSD < 1.0% for Cu 1 mg/L, n = 10). Documentation includes Certificate of Refurbishment, calibration verification report, and compliance summary referencing ASTM E1941 (Standard Test Method for Determination of Metals by Flame Atomic Absorption Spectrophotometry), ISO 8288 (Water Quality – Determination of Nickel, Copper, Zinc, Cadmium and Lead – Flame Atomic Absorption Spectrometric Methods), and USP (Heavy Metals).

Software & Data Management

The instrument operates natively via its embedded firmware and touchscreen OS — no proprietary PC software required for basic operation. For advanced data handling, it supports export of absorbance/time and concentration/report files in CSV format via USB port. When integrated with PerkinElmer WinLab32 (v3.55 or later), the system enables full GLP-compliant data management: electronic signatures, audit trail logging (per FDA 21 CFR Part 11 requirements), method version control, and raw-data archiving. All refurbished units ship with validated firmware versions and include configuration backup files for rapid recovery.

Applications

• Environmental testing: quantification of Pb, Cd, Cr, Ni, Zn, and Cu in wastewater, soil extracts, and drinking water per EPA Methods 7000B and 7130
• Clinical laboratories: serum and urine analysis of Ca, Mg, Fe, and Zn under CLIA-waived or moderate-complexity protocols
• Food and beverage QA/QC: detection of toxic elements in infant formula, cereals, and dairy products per AOAC 984.27 and ISO 11885
• Pharmaceutical excipient screening: elemental impurity profiling aligned with ICH Q3D guidelines
• Academic teaching labs: hands-on instruction in atomic spectroscopy principles, calibration curve development, and interference correction techniques

FAQ

Is this unit fully calibrated and verified prior to shipment?
Yes — each AAnalyst 200 undergoes comprehensive performance qualification (PQ) including wavelength accuracy, photometric linearity, flame stability, and detection limit verification against NIST-traceable standards.
Can graphite furnace functionality be added post-purchase?
The AAnalyst 200 chassis supports optional HGA-500 or HGA-600 graphite furnace modules; compatibility must be confirmed during pre-sale technical review based on serial number and firmware version.
What documentation accompanies the instrument?
You receive a Certificate of Refurbishment, PQ report, safety compliance summary, user manual (digital PDF), and firmware configuration archive.
Is remote diagnostics supported?
No — the AAnalyst 200 lacks Ethernet or modem-based remote access; all diagnostics and service require local physical connection and technician intervention.
Are spare parts and consumables available?
Yes — we maintain inventory of PerkinElmer OEM nebulizers, burner heads, HCLs, and graphite tubes; lead time for non-stock items is typically 2–4 weeks.