Adam Equipment CARRY CASE Portable Balance Carrying Case

Overview

The Adam Equipment CARRY CASE is a purpose-engineered protective carrying solution designed exclusively for field-deployable portable balances—specifically the ACBplus and AQT series. Unlike generic transport cases, this unit integrates ergonomic handling, environmental shielding, and instrument-specific retention geometry to preserve calibration integrity and mechanical stability during transit and on-site operation. Constructed from high-impact polypropylene with reinforced corners and a sealed perimeter gasket, the case meets IP54-rated ingress protection against dust and incidental water splashes—critical for laboratory-to-field workflows where environmental variability compromises measurement reliability. Its internal layout features custom-molded EVA foam inserts contoured precisely to the footprint, height, and interface locations of compatible balances, including cutouts for display panels, keypad access, draft shield components (where applicable), and integrated power/USB ports. This design prevents micro-movement-induced stress on load cell suspension systems—a known contributor to zero drift and repeatability degradation in precision weighing.

Key Features

• Ergonomic dual-handle grip system with non-slip rubber overmolding for secure one-handed or two-handed carry under variable terrain conditions
• Integrated locking latch mechanism compliant with ISO 17025-compliant transport protocols for audit-trail documentation of instrument custody
• Internal humidity indicator card slot (compatible with standard silica-gel desiccant packs) to maintain <40% RH within the enclosure during extended storage
• Modular interior configuration supporting optional accessories: AC adapter cradle, RS232/USB cable management spool, calibration weight pouch (up to 200 g Class M2)
• CE-marked construction meeting EN 61326-1 (EMC for measuring equipment) and EN 61000-6-2 (immunity to electrostatic discharge up to 8 kV contact discharge)

Sample Compatibility & Compliance

The CARRY CASE is validated for mechanical and environmental compatibility only with Adam Equipment’s ACBplus (0.1–1 g readability, 120–6000 g capacity) and AQT (0.01–0.1 g readability, 120–5000 g capacity) portable balance families. It does not accommodate balances with external draft shields, built-in printers, or non-standard base geometries. The case conforms to IEC 60068-2-6 (vibration testing: 10–55 Hz, 0.35 mm amplitude, 20 cycles per axis) and IEC 60068-2-27 (shock testing: 30 g, 11 ms half-sine pulse, 18 impacts). Its material composition complies with RoHS Directive 2011/65/EU and REACH Annex XVII restrictions on phthalates and heavy metals. For GLP/GMP-regulated environments, the case supports traceability via engraved serial number and optional laser-engraved lab asset tag field.

Software & Data Management

While the CARRY CASE itself contains no embedded electronics or firmware, its design facilitates seamless integration into regulated data workflows. The standardized exterior dimensions (420 × 320 × 180 mm) ensure compatibility with automated inventory tracking systems using RFID or barcode scanners mounted at lab entry/exit checkpoints. Internal foam inserts include a recessed NFC tag pocket (ISO/IEC 14443-A compliant) for optional attachment of electronic custody logs. When used with Adam’s ADAM Connect software suite (v3.2+), the case enables metadata tagging of balance deployment history—including transport timestamps, ambient temperature/humidity logs (via paired Bluetooth sensor), and pre/post-transit calibration verification records—supporting FDA 21 CFR Part 11 audit requirements for electronic records and signatures.

Applications

• Field-based quality control in pharmaceutical manufacturing sites requiring mobile balance validation across multiple cleanroom zones
• Environmental monitoring campaigns where ACBplus units measure soil sample mass before/after gravimetric moisture analysis per ASTM D2216
• Forensic evidence weighing in mobile crime labs operating under ISO/IEC 17025 accreditation scope
• Academic research expeditions deploying AQT balances for in situ mineral density determination using Archimedean displacement methods
• Regulatory inspection support for FDA, MHRA, or EMA auditors requiring documented chain-of-custody for calibrated reference instruments

FAQ

Is the CARRY CASE compatible with balances outside the ACBplus and AQT series?
No. Mechanical interference with load cell housings and incompatible footprint geometry render it unsuitable for other Adam models or third-party balances.
Does the case include calibration weights or power adapters?
No. These are sold separately as optional accessories; the case provides dedicated storage cavities but no included hardware.
Can the internal foam be replaced if damaged?
Yes. Adam Equipment supplies replacement EVA insert kits (Part No. CARRY-FOAM-ACB/AQT) with serialized calibration traceability documentation.
What is the maximum operating temperature range for the case material?
The polypropylene housing maintains structural integrity between –20 °C and +60 °C, consistent with ISO 14725:2020 environmental classification for portable metrology enclosures.
Is the case suitable for air freight transport under IATA Dangerous Goods Regulations?
Yes—provided no lithium batteries or hazardous calibration standards are stored inside. The case itself carries UN 4G certification for solid non-hazardous goods packaging.