KANOMAX 6006 Handheld Thermal Anemometer
| Brand | KANOMAX |
|---|---|
| Origin | Japan |
| Model | 6006 |
| Instrument Type | Thermal Anemometer |
| Measurement Range | 0.01–20.0 m/s |
| Resolution | 0.01 m/s (0.01–9.99 m/s), 0.1 m/s (10.0–20.0 m/s) |
| Accuracy | ±5% of reading |
| Operating Temperature | −20 to +70 °C |
| Operating Humidity | 20–85% RH |
| Temperature Compensation | Integrated circuit for enhanced accuracy within 10–40 °C |
Overview
The KANOMAX 6006 Handheld Thermal Anemometer is a precision-engineered, portable instrument designed for reliable air velocity and ambient temperature measurement in industrial hygiene, HVAC commissioning, cleanroom validation, and laboratory ventilation assessments. It operates on constant-temperature anemometry (CTA) principles: a heated platinum-wire sensor element dissipates heat proportionally to local airflow, enabling real-time quantification of convective cooling effects. This thermal transfer relationship—governed by King’s Law—is digitally linearized and compensated via an embedded temperature compensation circuit, ensuring metrological stability across its full operating range. Unlike cup or vane anemometers, the 6006 delivers true low-velocity sensitivity down to 0.01 m/s, making it suitable for laminar flow verification, duct traverse surveys, and fume hood face velocity testing where responsiveness and repeatability at sub-0.1 m/s levels are critical.
Key Features
- Single-button operation interface for intuitive wind speed and temperature acquisition—no mode menus or configuration layers required.
- Interchangeable probe design with factory-traceable calibration certificates; each probe maintains NIST-traceable accuracy without recalibration upon replacement.
- Integrated temperature compensation circuit ensures ≤±5% of reading accuracy within the 10–40 °C ambient range, meeting ISO 7726 Class B requirements for thermal environment instrumentation.
- Robust platinum-wire sensing element wound on ceramic substrate, offering long-term drift resistance and immunity to particulate fouling typical in industrial air handling systems.
- Wide environmental tolerance: functional across −20 to +70 °C and 20–85% RH, supporting field use in unconditioned mechanical rooms, outdoor intake assessments, and high-humidity pharmaceutical corridors.
- Ergonomic handheld housing with IP54-rated enclosure, providing protection against dust ingress and water splashing during mobile inspections.
Sample Compatibility & Compliance
The KANOMAX 6006 is compatible with standard 100 mm and 200 mm straight-tube probes (sold separately), as well as retractable telescopic probes for hard-to-reach grilles and diffusers. Its thermal sensing architecture imposes no restrictions on gas composition beyond non-corrosive, non-explosive air streams—making it appropriate for general indoor air quality (IAQ) audits per ASHRAE Standard 62.1 and ISO 16813. While not intrinsically safe, the device complies with IEC 61010-1:2010 for electrical safety in measurement equipment and carries CE marking under the EU EMC Directive 2014/30/EU. Calibration documentation aligns with ISO/IEC 17025 traceability requirements when performed by accredited service providers.
Software & Data Management
The 6006 operates as a standalone instrument with no proprietary software dependency. All measurements are displayed on a dual-line LCD with backlighting for low-illumination environments. Data logging is manual—users record values directly into field notebooks or digital QA forms. For integration into structured compliance workflows, the device supports manual entry into LIMS or electronic batch records compliant with FDA 21 CFR Part 11 when paired with validated SOPs. No firmware updates or driver installation is required; the unit draws power from two AAA alkaline cells with >20 hours of continuous operation—eliminating USB dependencies that compromise audit readiness in GMP-regulated facilities.
Applications
- HVAC system balancing and duct velocity profiling per SMACNA guidelines.
- Cleanroom ISO 14644-3 airflow uniformity mapping and recovery time verification.
- Fume hood face velocity qualification (OSHA 1910.1200, ANSI/AIHA Z9.5).
- Industrial ventilation surveying—including local exhaust capture velocity assessment near hoods and booths.
- Thermal comfort evaluation in office buildings and healthcare facilities per ISO 7730 and ASHRAE 55.
- Validation of laminar airflow workbenches and biosafety cabinets (NSF/ANSI 49).
FAQ
Does the KANOMAX 6006 require periodic recalibration?
Yes—annual calibration is recommended for applications requiring documented metrological integrity. Calibration should be performed using a NIST-traceable wind tunnel or rotating vane reference standard per ISO 17025 procedures.
Can the 6006 measure air velocity in high-temperature exhaust ducts?
It is rated for ambient operation up to +70 °C; however, direct insertion into hot ducts exceeding this limit may damage the sensor. Use with insulated extension probes or remote mounting adapters for such conditions.
Is the probe interchangeable between different KANOMAX models?
Probes are mechanically and electrically compatible only within the 6000-series platform (e.g., 6004, 6006, 6010); cross-series interchangeability is not supported.
What is the response time (t₉₀) of the sensor?
Typical t₉₀ is ≤1.5 seconds for step changes in airflow within the 0.1–10 m/s range, per manufacturer test reports under still-air conditions.
Does the unit support data export via Bluetooth or USB?
No—the 6006 is a self-contained analog-digital hybrid instrument with no wireless or wired data output capability. All data must be manually recorded.
