PMM 9010 Full-Digital, Fully Compliant EMC/EMI Test Receiver
| Brand | PMM |
|---|---|
| Origin | Italy |
| Model | PMM 9010 |
| Frequency Range | 10 Hz – 30 MHz (expandable to 3 GHz / 6 GHz) |
| Weight | 4 kg (main unit) |
| Power Supply | DC battery-operated (integrated Li-ion) |
| Compliance | Fully compliant with CISPR 16-1-1:2023, EN 55016-1-1, MIL-STD-461G, DO-160G, FCC Part 15/18 |
| Calibration Architecture | Fully digital signal path with built-in RF self-calibration source |
| Detection Modes | Peak, Quasi-Peak, Average, RMS, CISPR-Average, CISPR-RMS |
| RBW Filters | Digital implementation per CISPR 16-1-1 (200 Hz, 9 kHz, 120 kHz, 1 MHz) |
| Software Control | Native Narda STS EMCO software |
| Module Architecture | Pre-calibrated hot-swap functional modules (e.g., click noise analyzer, LISN interface, near-field probes) |
Overview
The PMM 9010 is a full-digital, standards-compliant EMI test receiver engineered for electromagnetic compatibility (EMC) conformance testing across commercial, industrial, automotive, and defense applications. Unlike conventional analog or hybrid receivers, the PMM 9010 digitizes the RF signal at the earliest possible stage—immediately after low-noise amplification and preselection—enabling true end-to-end digital signal processing (DSP) for all critical measurement functions: intermediate frequency (IF) filtering, detection (peak, quasi-peak, average, RMS), demodulation, and amplitude correction. This architecture eliminates mechanical filter banks, analog detector drift, and manual alignment dependencies, resulting in intrinsic long-term stability and metrological traceability without periodic recalibration. Designed to meet CISPR 16-1-1:2023 as its foundational compliance baseline, the receiver supports both conducted emission measurements (10 Hz – 30 MHz) and, when paired with optional high-frequency extension modules (PMM 9030 up to 3 GHz; PMM 9060 up to 6 GHz), radiated emission assessments per ANSI C63.4, EN 55032, and MIL-STD-461G. Its compact form factor (4 kg), integrated lithium-ion battery, and galvanically isolated DC operation make it uniquely suited for on-site audits, mobile lab deployments, and immunity pre-scanning in electrically noisy environments.
Key Features
- End-to-end digital RF architecture: All signal conditioning—including IF filtering, detection, and amplitude correction—is implemented in FPGA-based DSP, ensuring repeatability and eliminating analog component aging.
- Self-calibrating RF front-end: Integrated precision RF signal generator enables automated in-situ verification of gain, linearity, and detector response—no external calibration equipment required.
- CISPR-compliant digital filters: Digitally synthesized resolution bandwidths (200 Hz, 9 kHz, 120 kHz, 1 MHz) conforming strictly to CISPR 16-1-1 Annex D, with certified shape factors and attenuation slopes.
- Modular hardware design: Field-replaceable, factory-precalibrated functional modules—including click noise analyzers (single-channel internal or 4-channel external), LISN interfaces, and near-field probe adapters—enable rapid reconfiguration and audit-ready traceability.
- Battery-powered portability: Integrated rechargeable Li-ion battery supports >4 hours of continuous operation; DC isolation eliminates ground-loop artifacts during field measurements.
- SCPI-compliant remote control: Full command set over Ethernet (TCP/IP) and USB; compatible with LabVIEW, Python (PyVISA), and MATLAB for automated test sequences and integration into GLP/GMP-compliant validation workflows.
Sample Compatibility & Compliance
The PMM 9010 is validated for use with standardized EMC test accessories including CISPR-compliant Line Impedance Stabilization Networks (LISNs), current clamps (e.g., PK 120A), voltage probes, and magnetic/near-field probes. It natively supports measurement uncertainty budgets per ISO/IEC 17025:2017 and aligns with regulatory requirements under FCC Part 15 Subpart B, EN 55032 Class A/B, EN 61000-4-x immunity test support modes, DO-160G Section 20/21, and MIL-STD-461G CS114/RS103. All firmware and calibration data are digitally signed and version-locked to ensure audit trail integrity—critical for FDA 21 CFR Part 11–aligned quality systems. The receiver’s firmware update mechanism preserves calibration certificates across revisions, and module-specific calibration records are embedded in each hot-swappable unit.
Software & Data Management
The included Narda STS EMCO software provides intuitive, standards-guided test setup—including automatic limit line selection (CISPR, FCC, MIL), test plan sequencing, and real-time margin analysis. Measurement data are stored in IEEE 1584-compliant .emc binary format, supporting metadata tagging (operator ID, DUT ID, test standard, environmental conditions). Export options include CSV, XML, and PDF reports with embedded uncertainty statements. For enterprise integration, the software supports OPC UA server mode and RESTful API endpoints for ingestion into LIMS or MES platforms. Audit logs record all configuration changes, measurement triggers, and firmware updates—fully compliant with GLP and GMP documentation requirements.
Applications
- Conducted emissions testing per CISPR 16-2-1, EN 55016-2-1, and FCC Part 15B in R&D labs and certification facilities.
- Pre-compliance screening for power electronics, IoT devices, medical equipment (IEC 60601-1-2), and avionics subsystems.
- Click noise analysis for household appliances and industrial controls per CISPR 14-1, with simultaneous multi-channel capture capability.
- Field diagnostics of EMI sources using battery-powered operation and near-field scanning probes.
- EMC test system core in automated turnkey setups—paired with switching matrices, amplifiers, and anechoic chamber controllers.
FAQ
Does the PMM 9010 require annual external calibration?
No. Its self-calibrating architecture—verified via internal RF reference source and digital filter characterization—maintains traceability between accredited calibrations. External calibration is recommended every 24 months per ISO/IEC 17025, but operational verification is performed automatically at startup.
Can the PMM 9010 be used for radiated emissions testing?
Yes—when combined with the PMM 9030 (3 GHz) or PMM 9060 (6 GHz) expansion modules and calibrated antennas, it meets ANSI C63.4 and CISPR 16-2-3 requirements for radiated emission measurements.
Is firmware upgrade capability available post-purchase?
Yes. Firmware updates are delivered via secure web portal with cryptographic signature verification. Each update includes revision-controlled calibration compensation tables and maintains full backward compatibility with existing test plans and data files.
How is measurement uncertainty documented for accreditation purposes?
Uncertainty budgets—covering RBW filter shape error, detector nonlinearity, ADC quantization, and thermal drift—are published in the instrument’s Type Evaluation Report (TER), available upon request from PMM’s EU Notified Body partner.
What operating systems are supported by the EMCO software?
Windows 10/11 (64-bit) with .NET Framework 4.8; Linux and macOS support is provided via Dockerized CLI tools and SCPI over TCP/IP for headless automation.
