TianYuan TY8000 Digital Electronic Tensile Testing Machine

Overview

The TianYuan TY8000 Digital Electronic Tensile Testing Machine is a precision-engineered universal testing system designed for static mechanical property evaluation of non-metallic and polymeric materials under controlled uniaxial loading conditions. Based on the principle of electromechanical force application—where a high-precision AC servo motor drives a preloaded, backlash-free ball screw assembly—the instrument delivers stable, repeatable crosshead motion across a wide speed range. Force measurement is performed via a calibrated U.S.-sourced load cell with auto-ranging capability (1/300,000 internal resolution) and ±1% full-scale accuracy per ISO 7500-1 Class 1 compliance. The system operates in displacement-, load-, or strain-controlled modes, supporting standardized test protocols including tensile, compression, flexural, peel (180°), tear, and puncture configurations. Its rigid落地-style frame, integrated safety interlocks, and modular hardware architecture ensure operational reliability in QC laboratories, R&D facilities, and contract testing environments.

Key Features

• High-stiffness structural frame with 980 mm effective travel and 600 mm usable test space between grips
• Backlash-free precision ball screw (HIWIN Taiwan) coupled to an AC servo drive enabling smooth, noiseless motion from 20–200 mm/min (infinitely variable)
• Dual-control interface: standalone microprocessor display + Windows XP-based PC software—both fully functional for test execution and real-time monitoring
• Auto-ranging load cell (5 kN capacity, ±1% FS accuracy) with 0.001 N display resolution and selectable units (g, kg, N, kN, lb)
• Comprehensive mechanical safeguarding: overload emergency stop, upper/lower travel limit switches, leakage current protection, and automatic break-point halt
• Modular software architecture built on VB.NET framework, supporting customizable test method templates, multi-curve overlay analysis, and audit-ready data export

Sample Compatibility & Compliance

The TY8000 accommodates specimens ranging from thin polymer films (≥10 µm) to rigid composites and leather substrates, with grip customization available per ASTM D882, ISO 527-2, ASTM D3330 (peel), ASTM D1938 (tear), and GB/T 1040 series standards. All force and displacement measurements conform to ISO 7500-1 Class 1 verification requirements. Software-generated reports include timestamped metadata, operator ID, environmental notes, and calibration traceability—supporting GLP documentation workflows. While not FDA 21 CFR Part 11 certified out-of-the-box, the system’s password-protected parameter editing, electronic signature logging, and immutable raw data storage provide foundational infrastructure for regulated environments upon site-specific validation.

Software & Data Management

The bundled Windows XP-compatible software provides dual-language (English/Chinese) GUI navigation and supports six real-time plotting modes: load vs. displacement, load vs. time, displacement vs. time, stress vs. strain, and user-defined derived curves. Each test session automatically saves raw acquisition data at ≥50 Hz sampling rate, with configurable decimal precision (up to 3 places), unit preferences, and report templates compliant with internal QA formats. Historical datasets are indexed by batch ID, material type, and test standard; comparative analysis tools enable side-by-side curve superposition with statistical deviation overlays. Export options include CSV, PDF, and image formats (JPEG/PNG), suitable for inclusion in regulatory submissions or technical dossiers.

Applications

This system is routinely deployed for mechanical characterization of flexible packaging films, medical device tubing, automotive interior trim, geotextiles, adhesive tapes, rubber compounds, and biodegradable polymers. Typical use cases include determination of ultimate tensile strength, yield point, elongation at break, Young’s modulus, 180° peel adhesion energy, trouser tear resistance, and puncture force thresholds. Its adaptability to low-force (500 mm) regimes makes it especially suited for quality control in extrusion, coating, lamination, and converting operations where batch-to-batch consistency is critical.

FAQ

What standards does the TY8000 comply with for force measurement accuracy?
It meets ISO 7500-1 Class 1 requirements for static force verification, with load cell accuracy rated at ±1% of full scale.
Can the system perform tests requiring strain control or closed-loop feedback?
No—it operates in open-loop displacement or load control only; strain is calculated post-acquisition using extensometer input (optional add-on not included in base configuration).
Is the software compatible with modern Windows operating systems?
The native software is optimized for Windows XP; compatibility with Windows 10/11 requires virtualization or vendor-provided updated drivers (contact TianYuan support for migration path).
What is the maximum specimen thickness the standard grips can accommodate?
Standard pneumatic or wedge-action grips accept specimens up to 25 mm thick; custom fixtures for thicker or irregular geometries are available upon request.
Does the machine support automated test sequencing for repetitive samples?
Yes—batch mode allows pre-programmed sequences with auto-reset positioning, though manual specimen loading remains required between cycles.