Titan SCR-22 22-Gallon (83L) Flammable Liquid Safety Cabinet

Overview

The Titan SCR-22 is a UL-listed and FM-approved flammable liquid safety cabinet engineered for secure, code-compliant storage of Class I, II, and IIIA flammable and combustible liquids in laboratory, industrial, and pharmaceutical environments. Designed in accordance with NFPA 30 (Flammable and Combustible Liquids Code), OSHA 29 CFR 1910.106, and local fire authority requirements, this 22-gallon (83-liter) cabinet features double-walled 18-gauge steel construction with a 1.5-inch air gap for thermal insulation, self-closing three-point latching doors, and dual 2-inch diameter vent ports (with bungs included) for optional ducted exhaust. Its robust architecture ensures structural integrity during fire exposure tests per UL 1275, providing up to 10 minutes of fire resistance under standard test conditions.

Key Features

• Double-wall 18-gauge cold-rolled steel construction with 1.5-inch insulating air space for enhanced thermal protection
• Self-closing, three-point stainless steel latch system with 2-inch wide, fully adjustable door hinges
• Two 2-inch (50 mm) diameter vent ports—factory-installed with removable bungs and pre-punched knockout plates for field-configurable ducting
• Leak-proof 2-inch deep galvanized steel spill containment sump (capacity: ≥2 gallons / 7.6 L) meeting EPA 40 CFR 264.175 secondary containment requirements
• High-visibility fluorescent yellow finish (RAL 1023) with durable powder coating for chemical resistance and long-term durability
• Integrated leveling feet with adjustable height range (±10 mm) for stable placement on uneven floors
• Compliance documentation package includes UL 1275 certification mark, FM Global approval label, and NFPA 30 conformance statement

Sample Compatibility & Compliance

The SCR-22 is intended exclusively for the storage of approved flammable and combustible liquids—including acetone, ethanol, toluene, xylene, mineral spirits, and diesel fuel—in quantities not exceeding its rated capacity. It is not designed for corrosive chemicals (e.g., strong acids or bases), reactive substances (e.g., alkali metals), or pressurized containers. The cabinet meets mandatory regulatory benchmarks for North American markets: UL 1275 (Standard for Safety of Flammable Liquid Storage Cabinets), FM Approval Standard 6050, and conforms to Canadian Standards Association (CSA) B37.2. It supports GLP and GMP-aligned laboratory workflows by enabling traceable, auditable storage practices—particularly relevant for pharmaceutical QC labs operating under Health Canada, FDA, or EMA oversight.

Software & Data Management

This mechanical safety cabinet does not incorporate embedded electronics, software, or digital interfaces. As a passive containment solution, it requires no firmware updates, network connectivity, or data logging functionality. All operational compliance relies on physical design integrity and routine visual inspection protocols. Users are advised to maintain logbooks documenting periodic checks of door closure function, sump integrity, vent port configuration, and label legibility—practices aligned with ISO/IEC 17025:2017 clause 8.9 (Facility and Environmental Conditions) and FDA 21 CFR Part 211.46 (Ventilation systems). Optional accessories—including lock kits (keyed-alike or master-keyed sets), shelf kits (adjustable 16-gauge steel), and hazard warning placards—can be integrated without compromising certification status.

Applications

The Titan SCR-22 serves critical roles across multiple regulated environments: routine storage of solvents in analytical chemistry laboratories; centralized dispensing points in manufacturing cleanrooms; intermediate holding of reagents in API synthesis suites; and controlled access storage in university teaching labs. Its compact footprint (W24″ × D22″ × H36″) makes it suitable for placement beneath fume hoods or adjacent to chromatography workstations where spatial constraints exist. In pharmaceutical settings, it supports USP residual solvent handling procedures and aligns with Annex 15 (Qualification and Validation) expectations for equipment used in GMP operations. Industrial users apply it in maintenance workshops, paint mixing areas, and R&D pilot plants requiring OSHA-mandated segregation of ignition sources from Class I liquids.

FAQ

Is the SCR-22 certified for use in Canada?
Yes—the cabinet carries FM Global Approval and complies with CSA B37.2, permitting installation in Canadian provinces without additional modification.
Can this cabinet be externally vented?
Yes—dual 2-inch NPT-ready vent ports support connection to facility exhaust systems per NFPA 91 and local mechanical code requirements.
Does the cabinet include spill containment trays or shelves?
It includes one adjustable galvanized steel shelf (17″ × 19″) and a fixed 2-inch-deep sump; additional shelves are available as optional accessories.
What is the maximum allowable fill level for safe operation?
Per NFPA 30, total liquid volume must not exceed 60% of cabinet capacity (i.e., ≤13.2 gallons / 50 L) when storing Class I liquids, with full compliance dependent on proper container labeling and segregation.
Is third-party test report documentation available upon request?
Yes—UL 1275 test reports, FM Global audit summaries, and material safety data sheets (MSDS) for finish coatings are provided with commercial orders.