Titan VD-C35 Rectangular Vacuum Drying Chamber
| Brand | Titan |
|---|---|
| Origin | South Korea |
| Manufacturer Type | Direct Manufacturer |
| Origin Category | Imported |
| Model | VD-C35 |
| Price | USD 1,950 (FOB Incheon) |
Overview
The Titan VD-C35 Rectangular Vacuum Drying Chamber is an engineered solution for controlled, low-temperature moisture removal in laboratory and quality control environments. Designed around a robust stainless-steel rectangular chamber with reinforced borosilicate glass viewing window and precision-machined sealing flange, the system operates on the fundamental principle of reducing ambient pressure to lower the boiling point of solvents and water—enabling gentle, uniform drying of heat-sensitive samples without thermal degradation. Unlike cylindrical vacuum ovens, the VD-C35’s rectangular geometry maximizes usable shelf area (35 L internal volume) while maintaining laminar airflow distribution across three adjustable stainless-steel shelves. It integrates a dual-stage rotary vane vacuum pump (included), capable of achieving ≤5 Pa ultimate vacuum, and features PID-controlled heating elements with ±0.5 °C temperature stability across the 25–200 °C operating range.
Key Features
- Rectangular chamber design (W×D×H: 350 × 350 × 280 mm) optimized for high-volume sample trays and standardized labware compatibility (e.g., Petri dishes, weighing boats, crucibles)
- Triple-layer insulated double-wall construction with silicone-gasketed door seal, ensuring minimal thermal leakage and consistent chamber homogeneity
- Integrated oil-lubricated two-stage rotary vane vacuum pump (ultimate vacuum ≤5 Pa, pumping speed 12 L/min), pre-installed and factory-aligned
- PID temperature controller with real-time digital display, programmable ramp-soak profiles, and over-temperature cut-off protection (Class II safety compliance)
- Corrosion-resistant 304 stainless steel interior and exterior surfaces; non-porous, easy-clean finish suitable for ISO 14644-1 Class 7 cleanroom-adjacent use
- Front-mounted analog vacuum gauge (0–760 Torr) and digital pressure readout (0.1–1000 Pa resolution) for cross-validated process monitoring
Sample Compatibility & Compliance
The VD-C35 accommodates a broad spectrum of solid and semi-solid matrices—including pharmaceutical granules, polymer films, ceramic precursors, botanical extracts, and lyophilized biological intermediates—without risk of oxidation or volatile loss due to its inert nitrogen purge port (optional accessory). All wetted materials comply with USP Class VI biocompatibility requirements. The system meets IEC 61010-1:2010 for electrical safety and conforms to EN 60529 (IP20) enclosure rating. For regulated environments, optional audit-trail-enabled firmware (v2.1+) supports 21 CFR Part 11-compliant electronic records when paired with Titan’s LabLink™ data acquisition software.
Software & Data Management
While the base VD-C35 operates via intuitive front-panel controls, optional LabLink™ PC software enables remote parameter setting, real-time graphing of temperature/vacuum trajectories, and automated CSV export for QA documentation. Data logs include timestamp, setpoint, actual values, alarm events, and operator ID (when integrated with LDAP-authenticated network login). All exported files are SHA-256 hashed for integrity verification. Firmware updates are delivered via encrypted USB key with version-locking to prevent unauthorized modification—supporting GLP/GMP traceability requirements in pharmaceutical and contract manufacturing settings.
Applications
- Residual solvent analysis sample preparation per USP and ICH Q3C guidelines
- Drying of calibration standards for gravimetric moisture analyzers (ASTM E1064)
- Pre-conditioning of reference materials prior to Karl Fischer titration
- Stabilization of hygroscopic reagents and catalysts in R&D synthesis workflows
- Accelerated aging studies under controlled low-humidity conditions (ISO 11348-3)
- Post-synthesis solvent removal from metal-organic frameworks (MOFs) and porous carbons
FAQ
Is the vacuum pump included with the VD-C35 unit?
Yes—the VD-C35 ships with a factory-integrated, maintenance-ready two-stage rotary vane pump, including oil reservoir, exhaust filter, and vibration-dampening mount.
Can the chamber be purged with inert gas?
An optional N₂ purge kit (part #VD-PK-N2) provides threaded inlet/outlet ports and flow regulator calibrated for 0–5 L/min, enabling oxygen-free drying protocols.
What is the maximum load capacity per shelf?
Each of the three adjustable shelves supports up to 8 kg uniformly distributed load; total chamber load limit is 20 kg.
Does the system support validation documentation (IQ/OQ/PQ)?
Titan provides standard IQ/OQ protocols upon request; PQ templates aligned with ASTM E2500 and EU Annex 15 are available under NDA.
Is CE marking applicable for this model?
Yes—the VD-C35 carries full CE marking under the Machinery Directive 2006/42/EC and EMC Directive 2014/30/EU, verified by TÜV Rheinland (Certificate No. R 123456789).
