Ismatec REGLO ICC Series Independent-Channel Controlled Multi-Channel Peristaltic Pump
| Brand | ISMATEC |
|---|---|
| Origin | USA |
| Model | 78001-60 |
| Pump Type | Peristaltic Pump |
| Flow Rate Range | 0.001–35 mL/min |
| Speed Range | 1–100 rpm |
| Pressure Rating | Up to 1.0 bar (14.5 psi) |
| Accuracy | ±1% per channel |
| Channels | 2 |
| Roller Count | 8 |
| Tubing Fixation | Three-Position Clip |
| Power Supply | 100–240 VAC, 50/60 Hz |
| Catalog Number | 78001-60 |
Overview
The Ismatec REGLO ICC Series Independent-Channel Controlled Multi-Channel Peristaltic Pump is an engineered solution for precise, flexible, and scalable fluid handling in analytical laboratories, bioprocessing workflows, and automated synthesis platforms. Based on the well-established peristaltic pumping principle—where rollers compress elastomeric tubing to generate positive displacement—the REGLO ICC series delivers high reproducibility and contamination-free transfer without pump head contact with the fluid. Unlike conventional multi-channel pumps with synchronized operation, the ICC architecture enables true channel independence: each channel operates at a user-defined speed (1–100 rpm), direction (forward/reverse), and timing profile, eliminating cross-channel interference and enabling complex flow sequences such as gradient mixing, sequential dosing, or counter-current perfusion. Designed for integration into GLP-compliant environments and regulated workflows, the pump supports traceable operation through digital control interfaces and adheres to mechanical safety standards consistent with IEC 61010-1 for laboratory equipment.
Key Features
- Independent channel control: Each of the two channels can be set to distinct rotational speeds (1–100 rpm), flow directions, and start/stop timings via front-panel keypad or host computer.
- Bi-directional peristaltic operation: Enables reversible fluid transfer for applications requiring backflushing, sample recirculation, or bidirectional calibration verification.
- Rapid tubing exchange system: Integrated three-position clip design allows secure, tool-free installation and alignment of standard silicone or PharMed® BPT tubing—reducing setup time and minimizing operator-induced variability.
- High-precision flow delivery: Achieves ±1% volumetric accuracy per channel across the full 0.001–35 mL/min range, validated using gravimetric methods per ISO 8599 and ASTM D3417.
- Robust mechanical architecture: Eight-roller head configuration ensures low-pulsation flow, extended tubing life, and stable performance under continuous duty cycles.
- Universal power compatibility: Auto-ranging 100–240 VAC, 50/60 Hz input eliminates need for external transformers in global laboratory deployments.
Sample Compatibility & Compliance
The REGLO ICC Series is compatible with a wide range of chemically resistant tubing materials—including silicone, Viton®, and PharMed® BPT—enabling safe handling of aqueous buffers, organic solvents, mild acids/bases, and cell culture media. Tubing inner diameters from 0.1 mm to 3.2 mm are supported using standardized pump heads. The device conforms to IEC 61010-1:2010 for electrical safety in laboratory instruments and meets CE marking requirements under the EU Low Voltage Directive (2014/35/EU) and EMC Directive (2014/30/EU). While not intrinsically rated for hazardous locations, it is suitable for use in ISO Class 5–8 cleanrooms when paired with appropriate tubing and housing enclosures. For regulated environments, optional firmware logging (via USB) supports basic audit trail functionality aligned with ALCOA+ data integrity principles.
Software & Data Management
Control is enabled via intuitive front-panel navigation or USB 2.0 interface compliant with CDC ACM class protocols—requiring no proprietary drivers on Windows, macOS, or Linux systems. The pump accepts ASCII command sets (e.g., “SPEED 1 45” to set Channel 1 to 45 rpm), facilitating integration into LabVIEW, Python (pySerial), or custom SCADA architectures. Real-time status feedback (speed, direction, run state, error codes) is available via serial polling. Though the base unit does not include FDA 21 CFR Part 11-compliant electronic signatures or role-based access control, its deterministic command-response behavior supports validation protocols when embedded within validated instrument clusters governed by site-specific SOPs.
Applications
- Automated liquid handling in HPLC mobile phase delivery and column washing protocols.
- Cell culture perfusion systems requiring independent feed and bleed control across dual bioreactor loops.
- Multi-reagent dispensing in ELISA, PCR setup, and microplate assay automation.
- Calibration standard delivery in environmental water analysis (e.g., EPA Method 300.0).
- Process analytical technology (PAT) support for real-time reagent addition in continuous manufacturing.
- Teaching labs demonstrating fluid dynamics, flow rate quantification, and pump synchronization principles.
FAQ
Can the pump operate continuously for extended periods (e.g., 72+ hours)?
Yes—the motor and roller assembly are thermally rated for uninterrupted operation at ≤60 rpm; derating is recommended above 80 rpm for >8-hour duty cycles.
Is tubing calibration required for each channel separately?
Yes. Independent channel calibration compensates for minor variations in tubing elasticity and roller compression, ensuring ±1% accuracy per channel as specified.
Does the pump support analog input/output for external process control?
No—only digital USB communication is provided. Analog I/O requires external signal conditioning modules.
What tubing sizes are validated for use with model 78001-60?
Standard configurations support ID 0.5 mm, 0.76 mm, 1.6 mm, and 3.2 mm tubing; compatibility must be verified against pressure and flow specifications per manufacturer’s tubing selection guide.
Is firmware update capability available?
Firmware updates are performed via USB using Ismatec-provided utilities; version history and release notes are accessible through authorized distributor portals.
