Genetc ZD-2410 Portable DC Power Supply
| Brand | Genetc |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | ZD-2410 |
| Output Voltage | 24 V DC |
| Operating Temperature Range | -20 °C to +50 °C |
| Cycle Life | >1000 charge/discharge cycles |
| Protection Features | Overcharge, over-discharge, overload, overtemperature, and short-circuit protection |
| Compliance | GB 4793.1–2007 (Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 1: General requirements) |
| Application | Dedicated power source for mass spectrometers and other DC-input laboratory instruments |
Overview
The Genetc ZD-2410 Portable DC Power Supply is an engineered solution designed to deliver stable, regulated 24 V DC output for sensitive analytical instrumentation requiring clean, uninterrupted power in mobile or space-constrained laboratory environments. Unlike conventional AC/DC adapters or lead-acid battery backups, the ZD-2410 integrates a high-efficiency lithium-based energy storage system with precision voltage regulation circuitry—ensuring consistent output under variable load conditions and ambient temperatures ranging from –20 °C to +50 °C. Its design prioritizes operational safety and long-term reliability, fully complying with GB 4793.1–2007—the Chinese national standard aligned with IEC 61010-1 for electrical safety in laboratory equipment. The unit is explicitly validated for use with mass spectrometers and other DC-powered analytical platforms where voltage ripple, transient response, and electromagnetic compatibility (EMC) are critical to instrument stability and data integrity.
Key Features
- Compact, lightweight form factor—50% lighter than equivalent-capacity sealed lead-acid (SLA) battery systems—enabling field deployment, benchtop portability, and integration into mobile analytical carts.
- Lithium-based electrochemical architecture delivering >1000 full charge/discharge cycles at rated capacity, supporting multi-year service life under routine laboratory usage patterns.
- Integrated protection suite: microprocessor-controlled safeguards against overvoltage, overcurrent, overtemperature, deep discharge, and short-circuit events—preventing damage to both the power supply and connected instrumentation.
- Low-noise linear regulation ensures minimal output ripple (<50 mVpp) and fast transient recovery (<100 µs), essential for noise-sensitive detectors and analog signal chains in mass spectrometry and electrophoresis systems.
- Front-panel LED indicators provide real-time status feedback for battery level, charging state, and fault conditions—facilitating proactive maintenance and operational transparency.
Sample Compatibility & Compliance
The ZD-2410 is purpose-built for instruments with standardized 24 V DC input interfaces, including but not limited to quadrupole and time-of-flight mass spectrometers, vacuum gauge controllers, ion pump drivers, and auxiliary detector modules. It meets the mechanical, thermal, and electrical interface requirements specified in manufacturer documentation for major OEM mass spectrometry platforms. Safety certification per GB 4793.1–2007 confirms conformance with internationally recognized hazard mitigation principles—including dielectric strength testing, creepage/clearance verification, and fault-condition analysis. While not certified to UL/CSA or IEC 61010-1 for export markets, its design basis and test methodology are fully traceable to those standards, facilitating third-party validation for regional regulatory acceptance.
Software & Data Management
The ZD-2410 operates as a standalone hardware module without embedded firmware or digital communication interfaces (e.g., USB, RS-232, or CAN). All operational parameters—including charge state, cycle count, and fault logs—are accessible only via visual indicators and require no software installation or driver configuration. This architecture eliminates cybersecurity exposure vectors and ensures deterministic behavior in GLP/GMP-regulated environments where software validation and audit trail requirements apply. For laboratories maintaining electronic records under FDA 21 CFR Part 11, the device functions as a “dumb” power component—its operational history is documented manually in instrument logbooks or integrated into broader facility power management SOPs.
Applications
- Field-deployable mass spectrometry systems used in environmental monitoring, customs inspection, and emergency response scenarios.
- Benchtop backup power during AC grid instability or scheduled maintenance of central power distribution units.
- Mobile laboratory vehicles equipped with portable GC-MS or LC-MS platforms requiring vibration-tolerant, low-EMI DC sources.
- Electrophysiology rigs and optical coherence tomography (OCT) systems requiring stable 24 V biasing for photodetectors and piezoelectric actuators.
- Educational laboratories conducting hands-on electronics or instrumentation labs where student-safe, low-voltage DC sources are mandated.
FAQ
Is the ZD-2410 compatible with all 24 V DC-input mass spectrometers?
Yes—provided the instrument’s input connector type, polarity, and maximum current draw (≤ rated output) match the ZD-2410 specifications. Users must verify pinout compatibility and confirm absence of proprietary handshake protocols.
Does the unit support simultaneous charging and powering?
No—it operates in either charge mode or discharge mode; automatic switchover is not implemented to maintain isolation integrity and prevent backfeed risks.
What is the recommended storage protocol for extended idle periods?
Store at 30–50% state-of-charge in a dry, temperature-controlled environment (15–25 °C); perform a full charge/discharge cycle every six months to calibrate internal fuel gauging.
Can the ZD-2410 be used in explosion-proof or hazardous location environments?
No—it lacks ATEX, IECEx, or UL Class I Div 2 certification and is intended solely for general laboratory use in non-hazardous areas.
Is technical documentation available in English?
Yes—full English-language user manual, safety instructions, and GB 4793.1–2007 compliance summary are supplied with each unit and available upon request from Genetc technical support.
