- All
- Favorite
- Popular
- Most rated
| Brand | ALPHA |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | tensiTech+ |
| Price Range | USD 14,000 – 28,000 |
| Brand | ALPHA |
|---|---|
| Origin | USA |
| Model | tensiTech III |
| Compliance | ASTM D412, ASTM D575, ASTM D624 |
| Software | tensiDATA (data acquisition, control, analysis) |
| Actuation | Pneumatic grips |
| Extensometer | High-elongation digital extensometer |
| Programmability | Fully user-defined crosshead motion profiles and test sequences |
| Sample capacity | Up to 5 specimens per test run |
| Output units | Time, force, stress, strain (configurable) |
| Grip options | O-ring, wire wedge, curved jaw |
| Accessories | Digital thickness gauge, compression platens |
| Enclosure | Service-optimized chassis design |
| Application scope | Tensile, compression, tear, modulus measurement on elastomers and textiles |
| Target materials | Natural rubber, synthetic rubber, silicone rubber, thermoplastic elastomers (TPEs) |
| Brand | ALPHA |
|---|---|
| Origin | USA |
| Model | densiTECH+ |
| Measurement Principle | Hydrostatic Weighing (ASTM D297, ISO 2781, ASTM D792) |
| Sample Throughput | Up to 4 specimens/min |
| Density Accuracy | ±0.025% of reading |
| Mass Resolution | 0.0001 g |
| Applicable Materials | Cured rubber compounds, thermoplastic elastomers, carbon-black-filled polymers, vulcanizates |
| Compliance | ASTM D297–23, ISO 2781:2015, ISO 1183–1:2019, USP <841> (Density of Solids) |
| Brand | ALPHA |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | ALPHA CS-DFT Series |
| Price Range | USD 14,000 – 28,000 |
| Temperature Range | 23–120 °C |
| Frequency Range | 10–30 Hz |
| Static Load Capacity | 0–50 kg (0–110 lb) |
| Dynamic Stroke Range | 0–7.5 mm peak-to-peak |
| Specimen Dimensions | Ø17.8 mm × 25.4 mm (cylindrical) |
| Dimensions (H×W×D) | 122 cm × 76 cm × 61 cm |
| Weight | 250 kg (550 lb) |
| Power Supply | 110 VAC/60 Hz or 220 VAC/50 Hz, 20 A |
| Brand | ALPHA |
|---|---|
| Origin | USA |
| Model | D2020 |
| Measurement Principle | Hydrostatic Weighing (Air/Water Dual-Weight Method) |
| Density Range | 1.05–2.00 g/cm³ |
| Compliance | ISO 2781 |
| Temperature Compensation | Yes (liquid density correction vs. bath temperature) |
| Sample Throughput | 20-position automated carousel |
| Software Integration | Eclipse Daisy v5.x and Enterprise LIMS (barcode-enabled, specification limits, auto-reporting, audit-trail capable) |
| Pre-wetted carrier protocol | Yes |
| Readout Speed | <3 sec per sample post-stabilization |
| Regulatory Context | Supports GLP/GMP workflows with 21 CFR Part 11–compliant electronic records (when deployed with validated LIMS configuration) |
| Brand | Farrel |
|---|---|
| Origin | USA |
| Model | 9UM |
| Type | Continuous Twin-Screw Mixer for Rubber & Thermoplastic Compounding |
| Production Capacity | 400–40,000 kg/h |
| Rotor Configuration | Intermeshing Co-Rotating Twin Screw |
| Drive System | Variable-Frequency Motor with Precise Speed Control (0–600 rpm) |
| Barrel Temperature Control | Zone-wise Electric Heating + Water Cooling (±1°C stability) |
| PLC Interface | Touchscreen HMI with Data Logging, Recipe Management, and Audit Trail Capability |
| Compliance | Designed to Support GLP/GMP Environments per ASTM D3418, ISO 1133, and USP <1043> for Polymer Processing Validation |
Show next