- All
- Favorite
- Popular
- Most rated
| Brand | Beijing Hangfeng |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | KLD-Z-X |
| Detection Parameter | Particulate Contamination (Solid Particle Count) |
| Flow Range | 50–300 mL/min |
| Weight | 538 g (with display) |
| Power Supply | DC 12–24 V (ripple <30 mVp-p) |
| Dimensions | 94 × 87 × 46 mm |
| Operating Temperature | −20 °C to +60 °C |
| Media Temperature | −20 °C to +80 °C |
| Pressure Range | 3–30 MPa (high-pressure channel) / 0.3–3 MPa (low-pressure channel) |
| Humidity | 20–85% RH (operating, non-condensing) |
| Communication Interface | RS485 / RS232 |
| Repeatability | ±0.5 ISO contamination code |
| Channel Configuration | 4-channel or 6-channel (field-configurable) |
| Thread Specification | M10×1 mm |
| Brand | Beijing Hangfeng |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Regional Classification | Domestic (PRC) |
| Model | FYH-M |
| Pricing | Available Upon Request |
| Brand | Beijing Hangfeng |
|---|---|
| Origin | Beijing, China |
| Model | KLD-O-S |
| Product Type | Online Analyzer |
| Detection Parameters | Particle Contamination & Water Content (Relative Humidity) |
| Compliance Standards | ISO 4406, GJB 420B, NAS 1638 |
| Flow Rate | 50–120 mL/min |
| Power Supply | DC 10–26 V (Ripple < 100 mVp-p) |
| Dimensions | 105 × 89 × 64 mm |
| Weight | 538 g |
| Operating Temperature | −20 to +60 °C |
| Storage Temperature | −20 to +80 °C |
| Pressure Rating | < 1 MPa |
| Humidity Range (Operating) | 20–85% RH (non-condensing) |
| (Storage) | up to 98% RH |
| Communication Interface | RS-485 / RS-232 |
| Repeatability | ±0.5 ISO Code |
| Moisture Measurement Range | 0–100% RH |
| Temperature Sensing Range | −20 to +80 °C |
| Channel Configuration | 4- or 6-channel, auto-adaptive |
| Display | OLED with wide viewing angle |
| Input Control | Dedicated tactile keys for分级 navigation and parameter configuration |
| Alarm Function | Real-time contamination level alerting based on ISO 4406 thresholds |
| Bubble Discrimination | Patented full-spectrum optical discrimination algorithm for bubble rejection |
| Flow Compensation | Onboard real-time flow rate calculation and viscosity-corrected particle counting |
| Brand | Beijing Hangfeng |
|---|---|
| Origin | Beijing, China |
| Model | ZL-B |
| Power Supply | AC 220 V / 50 Hz or DC 9 V high-energy battery |
| Weight | ≤5 kg |
| Power Consumption | ≤300 mW |
| Battery Life | Up to 6 hours continuous operation |
| Dimensions (L×W×H) | 225 × 225 × 140 mm |
| Repeatability Error | ≤3% |
| Test Parameters | Comprehensive contamination index, water content, metallic debris >65 µm, presence of light hydrocarbon dilution |
| Classification Output | “Poor”, “Usable”, or “Good” |
| Brand | Beijing Hangfeng |
|---|---|
| Origin | Beijing, China |
| Model | KLD-3 / KLD-4 / KLD-5 |
| Detection Parameter | Particle Count & Contamination Level (NAS 1638) |
| Sample Volume | 10 mL |
| Compliance Standard | NAS 1638 |
| Power Supply | Integrated Rechargeable Battery |
| Display | Color LCD with Numeric and Graphical Output |
| Data Output | Built-in Thermal Printer |
| Application Focus | Lubricating Oil Condition Monitoring |
| Category | Petroleum-Specialized Analytical Instrument for In-Service Oil Analysis |
| Brand | Beijing Hangfeng |
|---|---|
| Origin | Beijing, China |
| Model | YSF-1 |
| Measurement Principle | Capacitive Water Activity (a<sub>w</sub>) Sensing with Integrated Temperature Compensation |
| Output Signals | RS232 serial interface, 4–20 mA analog output |
| Relay Outputs | 2 programmable alarm channels |
| Display | Real-time a<sub>w</sub> (0.01–1.00), temperature (°C), and calculated absolute water content (ppm) |
| Calibration | Dual-point calibration support for traceable accuracy |
| Portability | Handheld or inline mounting configuration |
| Compliance Context | Designed for routine condition monitoring per IEC 60814, ASTM D6304 (Karl Fischer correlation), and IEEE C57.106 guidance for transformer oil moisture assessment |
| Brand | Beijing Hangfeng |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | KLD-B-2 |
| Pricing | Available Upon Request |
| Brand | Beijing Hangfeng |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | FYH |
| Pricing | Available Upon Request |
| Brand | Beijing Hangfeng |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | ZL-Z |
| Pricing | Available Upon Request |
| Brand | Beijing Hangfeng |
|---|---|
| Origin | Beijing, China |
| Model | KLD-BA |
| Detection Principle | Light Obscuration (LO) |
| Compliance Standards | NAS 1638, GJB 420B, ISO 4406 |
| Sample Types | Hydraulic oil, lubricating oil, transformer oil, turbine oil, gear oil, engine oil, aviation kerosene, water-based hydraulic fluids, organic solvents, polymer solutions |
| Sensor Type | KLD-TC laser obscuration sensor |
| Display | 7-inch capacitive touchscreen (Android OS) |
| Data Storage | Internal database with timestamped records |
| Output | Thermal printer module, USB interface for data export and firmware updates |
| Sampling System | Precision metering pump with volumetric accuracy control |
| Calibration Curves | Three user-selectable curves (ACFTD, ISO MTD, GOST) |
| Reporting Standards | Built-in support for ISO 4406, NAS 1638, GJB 420A–1996, GJB 420B–2006, and seven additional particle contamination classification schemes |
| Brand | Beijing Hangfeng |
|---|---|
| Origin | Beijing, China |
| Model | HFN-B |
| Measurement Principle | Capillary Efflux (ASTM D445 / ISO 3104 compliant) |
| Temperature Control | 40 °C ± 0.1 °C |
| Sample Volume | 80 µL |
| Measurement Time | ≤ 30 s per test |
| Viscosity Range | 2–1000 mm²/s (cSt) at 40 °C |
| Calibration | Multi-point viscosity standard calibration (certified mineral oil standards) |
| Display | 7-inch capacitive touchscreen |
| Power | Rechargeable Li-ion battery (≥ 8 h continuous operation) |
| Cleaning | Solvent-free — dry wipe with lint-free industrial cloth |
| Compliance | Designed to support ASTM D445, ISO 3104, and ISO 2909 procedures for kinematic viscosity determination |
| Brand | Beijing Hangfeng |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | FHV-3 |
| Pricing | Upon Request |
| Density Range | 600–1250 kg·m⁻³ |
| Viscosity Range | 1–1000 cP |
| Temperature Range | 0–100 °C |
| Density Accuracy | ±0.5% or ±5 kg·m⁻³ (whichever is greater) |
| Viscosity Accuracy | ±5% or ±1 cP (whichever is greater) |
| Dielectric Constant Accuracy | ±3% |
| Temperature Accuracy | ±0.5 °C |
| Resolution | Density 0.1 kg·m⁻³ |
| Response Time | <30 s (initial stabilization), 1 Hz data refresh rate |
| Output | RS485 MODBUS RTU |
| Power Supply | 9–32 VDC |
| Current Draw | <20 mA @ 24 VDC |
| Max Process Pressure | 10 bar (custom options available) |
| Fluid Temp. | 0–100 °C |
| Ambient Temp. | −40 to +85 °C |
| Storage Temp. | −40 to +100 °C |
| Housing Material | 316/304 stainless steel or Hastelloy C-276 |
| Mechanical Interface | G3/4″ |
| IP Rating | IP65 |
| Sealing Material | FKM fluoroelastomer |
| Cable | 2 m M8 6-pin |
| Max Flow Velocity | <0.1 m/s |
| Compliance | CE, ASTM D1657, EN 61326-1, EN 61326-2-3, ICES-003 Class B, National Metrology Verification Report |
Show next