- All
- Favorite
- Popular
- Most rated
| Brand | PMM |
|---|---|
| Origin | Italy |
| Model | PMM CA0010 |
| Frequency Range | 150 kHz – 30 MHz |
| Frequency Accuracy | ±100 Hz |
| Amplitude Range | 20 dBµV – 95 dBµV |
| Amplitude Accuracy | ±0.1 dB |
| Pulse Rise Time | ≥100 µs |
| Pulse Interval | ≥100 µs |
| Time Step Resolution | 10 µs |
| Pulse Repetition Rate | 1 Hz – 500 Hz |
| Repetition Rate Accuracy | ±1 Hz |
| Amplitude Flatness | ≤1.8 dB (150 kHz – 30 MHz) |
| Amplitude Resolution | 0.1 dB |
| Max Input Level | 140 dBµV (2 W) |
| Built-in LISN | Single-phase, 16 A, compliant with CISPR 16-1-2 (150 kHz – 30 MHz) |
| RF Connector | BNC (F) |
| Operating Temperature | −5 °C to +45 °C |
| Dimensions | 235 mm × 105 mm × 335 mm |
| Weight | 4.1 kg |
| Standards Compliance | CISPR 16-1-1, CISPR 16-1-2, CISPR 14-1 |
| Dynamic Range Enhancement | Integrated preselector |
| Signal Generation Capabilities | CW, click, and CISPR pulse signals |
| Software Resolution | 500 µs QP detection, full IF bandwidth display |
| Brand | PMM |
|---|---|
| Origin | Italy |
| Type | RF Power Amplifier |
| Power Range | 15 W to 10,000 W |
| Compression Point | 1 dB typical |
| Stability | High long-term amplitude and phase stability |
| Configuration | Benchtop or rack-mountable (model-dependent) |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | EEDs |
| Pricing | Available Upon Request |
| Brand | PMM |
|---|---|
| Origin | Italy |
| Model | PMM 9010 |
| Frequency Range | 10 Hz – 30 MHz (expandable to 3 GHz / 6 GHz) |
| Weight | 4 kg (main unit) |
| Power Supply | DC battery-operated (integrated Li-ion) |
| Compliance | Fully compliant with CISPR 16-1-1:2023, EN 55016-1-1, MIL-STD-461G, DO-160G, FCC Part 15/18 |
| Calibration Architecture | Fully digital signal path with built-in RF self-calibration source |
| Detection Modes | Peak, Quasi-Peak, Average, RMS, CISPR-Average, CISPR-RMS |
| RBW Filters | Digital implementation per CISPR 16-1-1 (200 Hz, 9 kHz, 120 kHz, 1 MHz) |
| Software Control | Native Narda STS EMCO software |
| Module Architecture | Pre-calibrated hot-swap functional modules (e.g., click noise analyzer, LISN interface, near-field probes) |
| Brand | PMM |
|---|---|
| Origin | Italy |
| Model | PMM 1008 |
| Generator Output | 160 A (continuous), 1200 A (transient) |
| Continuous Field Levels | 1–100 A/m (IEC/EN 61000-4-8 Classes 1–5) |
| Transient Field Levels | 300–1000 A/m |
| Coil Dimensions | 1.035 m × 1.035 m × 35 mm |
| Antenna Factor | 0.87 |
| Coil Inductance | ~0.6 µH |
| Coil Resistance | 670 µΩ |
| Generator Dimensions (W×D×H) | 385 × 215 × 400 mm |
| Generator Weight | 28 kg |
| Coil + Trolley + Stand Total Weight | 50 kg |
| Power Supply | 198–264 V AC, 50/60 Hz |
| Interface | RS232/RS485 (DB9) |
| Safety | Interlock-enabled, thermal cutoff, ≤4 Vrms open-circuit voltage |
| Compliance | IEC/EN 61000-4-8, EU Directives 89/336/EEC & 73/23/EEC |
Show next