- All
- Favorite
- Popular
- Most rated
| Brand | Zhonghuipu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | A-30PSA |
| Output Flow Rate | 0–35 L/min |
| Output Pressure | 0–0.5 MPa |
| Dew Point | ≤ −40 °C |
| Particle Size Filtration | < 0.01 µm |
| Power Supply | 220 V ±10%, 50 Hz |
| Power Consumption | 2500 W |
| Dimensions (L×W×H) | 90 × 60 × 75 cm |
| Weight | ~110 kg |
| Brand | Zhonghuipu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | A-30PSAD |
| Output Flow | 0–22 L/min at 0.7 MPa (for nitrogen generator supply) |
| Output Pressure | 0–0.7 MPa (factory-set at 0.4 MPa) |
| Pressure Stability | < 0.003 MPa |
| Dew Point | ≤ −22 °C |
| Operating Environment | 5–40 °C, RH ≤ 85% |
| Power Consumption | 1200 W |
| Input Voltage | 220 V ±10% |
| Construction | 304 Stainless Steel Tanks & Filtration Components |
| Air Purity Class | ISO 8573-1 Class 2:2:2 (solid particles, water, oil) |
| Brand | Zhonghuipu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | ZA-1500C |
| Hydrocarbon Removal Principle | High-temperature catalytic oxidation using multi-metallic noble metal catalysts |
| Output Flow Rate | 0–1500 mL/min |
| Output Pressure | 0–0.4 MPa |
| Hydrocarbon Content (as CH₄) | <0.1 ppm(v) |
| Dew Point | < −10 °C |
| Pressure Stability | ±0.003 MPa |
| Power Consumption | 530 W |
| Input Voltage | 220 V ±10% AC |
| Dimensions (L×W×H) | 450 × 250 × 420 mm |
| Net Weight | 27 kg |
| Brand | Zhonghuipu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | A-10 |
| Output Flow Rate | 0–10 L/min at 0.4 MPa |
| Output Pressure Range | 0–0.5 MPa (factory-set to 0.4 MPa) |
| Pressure Stability | < ±0.003 MPa |
| Power Consumption | 550 W |
| Dimensions (W×D×H) | 380 × 570 × 440 mm |
| Net Weight | ~35 kg |
| Air Tank Capacity | 8 L |
| Tank Material | 1.5 mm thick 304 stainless steel |
| Cooling & Drying | Dual-fan coil heat exchanger with condensate removal |
| Drainage System | Two-stage automatic condensate discharge |
| Brand | Zhonghuipu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | SPB-3S |
| Price | Upon Request |
| Output Flow Rate | 0–2000 mL/min at 0.4 MPa |
| Output Pressure | 0–0.4 MPa |
| Pressure Stability | < 0.003 MPa |
| Noise Level | < 35 dB(A) |
| Operating Environment | 0–45 °C, Relative Humidity ≤ 85% (non-dusty, non-corrosive atmosphere) |
| Power Consumption | 150 W |
| Input Voltage | 220 V ± 10% AC |
| Dimensions (W×D×H) | 400 × 180 × 250 mm |
| Net Weight | ~15 kg |
| Brand | Zhonghuipu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | A-10PSA |
| Output Flow | 0–10 L/min at 0.4 MPa |
| Output Pressure | 0–0.4 MPa |
| Dew Point | < −10 °C |
| Pressure Stability | < ±0.003 MPa |
| Power Consumption | 550 W |
| Input Voltage | 220 V ±10% |
| Dimensions (L×W×H) | 400 × 425 × 650 mm |
| Net Weight | ~45 kg |
| Operating Environment | 5–40 °C, RH ≤85% |
| Filtration | Dual-stage particulate + PSA desiccant drying |
| Compressor | Thomas (USA) oil-free rocking piston type |
| Pneumatic Components | SMC (Japan), Airtac (Taiwan) |
| Tank & Filter Housing | 304 stainless steel & aluminum alloy |
| Brand | Zhonghuipu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | GCK3302 / GCK3308 |
| Output Flow Rate | 0–5000 mL/min (up to 8000 mL/min at 0.4 MPa) |
| Output Pressure | 0–0.4 MPa |
| Pressure Stability | < 0.003 MPa |
| Noise Level | < 35 dB(A) |
| Operating Environment | 0–45 °C, RH ≤ 85% (non-dusty, non-corrosive atmosphere) |
| Power Consumption | 250 W |
| Input Voltage | 220 V ± 10% |
| Dimensions (W×D×H) | 480 × 260 × 350 mm |
| Net Weight | ~25 kg |
| Brand | Zhonghuipu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | ZA-10LC |
| Quotation | Upon Request |
| Hydrocarbon Removal Principle | High-Temperature Catalytic Oxidation using Multi-Metallic Noble Metal Catalysts |
| Output Flow Rate | 1–10 L/min @ 45 psig |
| Output Pressure Range | 0–0.35 MPa |
| Total Hydrocarbons (THC) | <20 ppb |
| Dew Point | <−20 °C |
| NO/NO₂/NOₓ/SO₂/O₃/H₂S | <0.5 ppb |
| CO | <25 ppb |
| Ambient Operating Temperature | 1–40 °C |
| Relative Humidity | <80% RH |
| Power Supply | 220 V ±10%, 50–60 Hz |
| Average Power Consumption | 400 W |
| Dimensions (W×D×H) | 482 × 600 × 267 mm |
| Net Weight | ~35 kg |
| Brand | Zhonghuipu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | SPB-3 |
| Price | Upon Request |
| Output Flow Rate | 0–2000 mL/min at 0.4 MPa |
| Output Pressure | 0–0.4 MPa |
| Pressure Stability | < 0.003 MPa |
| Noise Level | < 35 dB(A) |
| Operating Environment | 0–45 °C, Relative Humidity ≤ 85% (non-dusty, non-corrosive atmosphere) |
| Power Consumption | 150 W |
| Input Voltage | 220 V ± 10% |
| Dimensions (W×D×H) | 420 × 260 × 350 mm |
| Net Weight | ~22 kg |
| Brand | Zhonghuipu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | ZA-1000 |
| Hydrocarbon Removal Principle | High-temperature catalytic oxidation using Pt/Pd-based catalysts |
| Output Flow Rate | 0–1000 mL/min |
| Output Pressure | 0–0.6 MPa (air-pressure-dependent, no built-in compressor) |
| Residual Hydrocarbon Content | <0.1 ppm (as methane equivalent) |
| Brand | Zhonghuipu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | A-20 |
| Price | Upon Request |
| Output Flow Rate | 0–35 L/min at 0.4 MPa |
| Output Pressure | 0–0.5 MPa (factory-set to 0.4 MPa) |
| Pressure Stability | < ±0.003 MPa |
| Power Consumption | 750 W |
| Dimensions (W×D×H) | 380 × 570 × 440 mm |
| Net Weight | ~35 kg |
| Brand | Zhonghuipu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | ZAT-5000UBR |
| Output Flow Rate | 0–5000 mL/min |
| Output Pressure | 0–0.6 MPa (requires external compressed air supply) |
| Total Hydrocarbon Content (as methane) | <0.1 ppm(v) |
| Hydrocarbon Removal Principle | High-temperature catalytic oxidation using Pt/Pd-based catalysts |
| Catalyst Operating Temperature | 400–450 °C |
| Input Air Hydrocarbon Tolerance | ≤100 ppm(v) (as methane) |
| Power Supply | 220 V ±10%, 50–60 Hz |
| Power Consumption | 500 W |
| Dimensions (W×D×H) | 400 × 360 × 220 mm |
| Net Weight | ~12 kg |
| Ambient Operating Temperature | 0–40 °C |
| Ambient Relative Humidity | <85% RH |
| Sealing Material | Low-sulfur silicone rubber gaskets |
| Brand | Zhonghuipu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | SPB-5 |
| Output Flow Rate | 0–2000 mL/min at 0.4 MPa |
| Output Pressure | 0–0.4 MPa |
| Dew Point | < −10 °C |
| Pressure Stability | < 0.003 MPa |
| Power Consumption | 330 W |
| Input Voltage | 220 V ±10% |
| Dimensions (W×D×H) | 450 × 250 × 420 mm |
| Net Weight | ~24 kg |
| Operating Ambient | 5–40 °C, RH ≤85% |
| Construction Material | 304 Stainless Steel Components |
| Safety Features | Thermal Protector, Overcurrent Protection, Pressure Relief Valve |
| Optional Hydrocarbon Removal Module | High-Temperature Catalytic Oxidation with Noble Metal Catalysts |
| Brand | Zhonghuipu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | ZA-10L |
| Output Flow | 0–10 L/min @ 30 psig |
| Output Pressure | 0.2–0.8 MPa (air-supplied inlet pressure required, no built-in compressor) |
| Hydrocarbon Content | <20 ppb |
| Dew Point | −40 °C |
| NO/NO₂/NOₓ/SO₂/O₃/H₂S | <0.5 ppb |
| CO | <25 ppb |
| Particulate Size | <0.01 µm |
| Power Supply | 220 V ±10%, 50–60 Hz |
| Power Consumption | 200 W (average) |
| Dimensions (W×D×H) | 450 × 430 × 177 mm |
| Net Weight | ~18 kg |
| Brand | Zhonghuipu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | ZA-5000 |
| Hydrocarbon Removal Principle | High-Temperature Catalytic Oxidation using Multi-Metallic Noble Metal Catalysts |
| Output Flow Rate | 0–5000 mL/min |
| Output Pressure | 0.1–0.6 MPa (Air-Pressure-Dependent |
| Total Hydrocarbon Content | <10 ppb (as methane equivalent) |
| Dew Point | <−20 °C |
| Particulate Filtration | <0.01 µm |
| Operating Ambient Temperature | 1–40 °C |
| Relative Humidity | <80% RH |
| Power Supply | 220 V ±10%, 50–60 Hz |
| Peak Power Consumption | 500 W |
| Dimensions (W×D×H) | 450 × 430 × 177 mm |
| Net Weight | ~18 kg |
Show next