EYELA
Filter
Showing all 18 results
| Brand | EYELA |
|---|---|
| Origin | Japan |
| Model | CA-1116A |
| Temperature Range | −20 to 30 °C (without heater) |
| Temperature Stability | ±2 °C |
| Cooling Capacity | 1100 W at 10 °C, 840 W at 0 °C, 510 W at −10 °C |
| Max. Flow Rate | 12 L/min |
| Max. Head | 9.5 m |
| Reservoir Volume | ~16.5 L (Ø280 × H270 mm) |
| Reservoir Material | SUS304 Stainless Steel |
| Refrigerant | R407C (HFC blend) |
| Compressor Control | ON/OFF |
| Temperature Display | LED digital, 1 °C resolution |
| Safety Features | Leakage/overcurrent protection, high-pressure compressor switch, compressor protection timer, self-diagnostic thermostat, pump auto-protection |
| Power Supply | AC 220 V, 50 Hz, 1.1 kVA, 5.5 A |
| Ambient Operating Temperature | 5–35 °C |
| Dimensions (W×D×H) | 354 × 384 × 851 mm (excl. water nozzles) |
| Net Weight | 41 kg |
| Cooling Method | Air-cooled |
| Brand | EYELA |
|---|---|
| Origin | Japan |
| Model | CCX-3200 |
| Tube Capacity | 1–8 (up to 32 with adapter) |
| Reaction Volume per Tube | 0.5–60 mL |
| Temperature Range | RT +10°C to 280°C (max 200°C at 50–60 mL load) |
| Rotation Speed | ~100–1200 rpm (in water) |
| Heating Method | Electric block heater with PID control |
| Stirring Type | High-strength magnetic stirring |
| Condensation Mode | Optional reflux via coolant-split head and condenser |
| Vessel Compatibility | DURAN® borosilicate glass tubes (Φ12–34 mm, 12 sizes, max height 50 mm) |
| Gas Handling | Compatible with Schlenk lines, sealed tubes, pressure-rated vessels, and Dean-Stark traps |
| Dimensions (W×D×H) | 245 × 275 × 800 mm (stand only) |
| Weight | ~8 kg |
| Compliance | Designed for GLP-compliant synthetic laboratories |
| Brand | EYELA |
|---|---|
| Origin | Japan |
| Model | FDL-1000 / FDL-2000 |
| Cold Trap Temperature | −45 °C (FDL-1000) / −80 °C (FDL-2000) |
| Ice Capacity | 4 L/24 h (FDL-1000) / 3 L/24 h (FDL-2000) |
| Cold Trap Dimensions | Ø200 × 300 mm, SUS304 |
| Vacuum Gauge | Pirani gauge, 0.0–533 Pa (digital display) |
| Refrigeration System | FDL-1000 — 600 W, R404A |
| Vacuum Pump Interface | Optional, 100/120 L/min (50/60 Hz) |
| Display | 3.4-inch TFT LCD with membrane keypad |
| Power Supply | Dedicated socket for freeze-drying chamber (max. 3 A) |
| External Dimensions (W×D×H) | 700 × 550 × 955 mm |
| Net Weight | ~116 kg (FDL-1000) / ~144 kg (FDL-2000) |
| Safety Features | Leakage current protection, overcurrent protection, compressor protection circuit, service outlet fuse, self-diagnostic control panel, automatic venting upon vacuum release |
| Optional Accessories | Ice mass sensor, data logging output (analog), 0.2 µm inlet filter, defrost function, power recovery timer |
| Brand | EYELA |
|---|---|
| Origin | Japan |
| Model | FDM-1000 |
| Cold Trap Temperature | −45 °C |
| Condensation Capacity | 1 L/24 h |
| Display | 3.4″ LCD (button-operated) |
| Vacuum Gauge | Digital Pirani gauge (0.0–533 Pa) |
| Cold Trap Dimensions | Ø200 × 175 H mm (SUS304) |
| Refrigeration System | Air-cooled compressor (450 W, R507A) |
| Vacuum Pump Interface | Dedicated socket (max. 6 A), compatible with ≥50 L/min pumps |
| Power Supply | 7 A total (230 V AC, 50/60 Hz) |
| External Dimensions & Weight | 450 W × 420 D × 460 H mm / ≈38 kg |
| Safety Features | Leakage and overcurrent protection, compressor protection circuit, panel self-diagnostic function, vacuum release valve (0.2 µm filter), hot-gas defrost, power-fail recovery logic |
| Optional Functions | Vacuum pump auto-start/stop, real-time vacuum & cold trap temperature monitoring, elapsed time counter (vacuum pump runtime), automatic end-of-drying detection, vacuum auto-bleed post-cycle |
| Brand | EYELA |
|---|---|
| Origin | Japan |
| Model | FDM-2010 |
| Cold Trap Temperature | −80 °C |
| Condensation Capacity | 1 L/24 h |
| Display | 3.4-inch LCD |
| Vacuum Gauge | Digital Pirani gauge (0.0–533 Pa) |
| Cold Trap Dimensions | Ø153 × 225 H mm, SUS304 |
| Refrigeration System | Dual 500 W compressors, HFC blend (R290/R170) |
| Vacuum Pump Interface | Dedicated 125 V/6 A outlet (pump not included |
| Freeze Drying Chamber Interface | Dedicated 125 V/2 A outlet |
| Overall Dimensions | 450 W × 550 D × 945 H mm |
| Net Weight | ~81 kg |
| Safety | Leakage current protection, overcurrent cutoff, compressor thermal protection, self-diagnostic control panel, vacuum release valve with 0.2 µm particulate filter, hot-gas defrost system |
| Functions | Auto-vacuum start/stop, vacuum & cold trap temperature monitoring, elapsed time logging (for pump runtime and sublimation duration), power-failure recovery, automatic vacuum break post-cycle |
| Brand | EYELA |
|---|---|
| Origin | Japan |
| Model | MF-1000 |
| Rotation Speed Range | 100–1200 rpm |
| Max. Evaporation Rate | 760 mL/h (water) |
| Ultimate Vacuum | ≤399.9 Pa (≤3 mmHg) |
| Condenser Type | Vertical double-coil |
| Collection Flask | 1 L spherical flask (S35/20) |
| Condenser & Vacuum Interface | Quick-connect, OD 10 mm × 2 each |
| Wetted Materials | Borosilicate glass, SUS 304 stainless steel, PTFE |
| Dimensions (W×D×H) | 490 × 350 × 930 mm |
| Weight | 17 kg |
| Power Supply | AC 100 V, 50/60 Hz, 2 A, 200 VA |
| Drive Motor | Brushless DC motor |
| Shaft Sealing | Magnetic coupling |
| Bearing | Ceramic lower bearing |
| Stirring Element | Removable PTFE-coated blade with smooth, non-porous surface |
| Brand | EYELA |
|---|---|
| Origin | Japan |
| Model | MMV-1000W |
| Oscillation Mode | Vertical or Tilt (0–20° adjustable) |
| Speed Range | 20–300 cycles/min (vertical), 20–250 cycles/min (tilt) |
| Amplitude | 40 mm |
| Max Load Capacity | 7 kg × 2 (including clamps) |
| Flask Compatibility | Standard clamp: 50–1000 mL |
| Large clamp | 50–3000 mL |
| Display | Digital cycle counter with memory function |
| Drive System | Brushless DC motor |
| Noise Level | ≤55 dB(A) |
| Start/Stop Profile | Soft acceleration/deceleration |
| Operating Mode | Timer or continuous |
| Power Supply | AC 100–240 V, 50/60 Hz |
| Brand | EYELA |
|---|---|
| Origin | Japan |
| Model | N-1100S / N-1100SF |
| Rotation Speed | 20–180 rpm |
| Max. Evaporation Rate | 25 mL/min (water) |
| Ultimate Vacuum | <399.9 Pa (3 mmHg) |
| Bath Temperature Range | RT+5°C to 90°C (N-1100S-W / N-1100SD) or RT+5°C to 180°C (N-1100S-WD) |
| Temp. Control Accuracy | ±1.5°C (water bath, rotating flask) / ±3.0°C (oil bath, rotating flask) |
| Heating Power | 1 kW |
| Condenser | Inclined double-layer coiled tube, cooling area: 0.146 m² |
| Flask Capacity | 1 L pear-shaped (ISO NS29/38) or 500 mL pear-shaped (transparent joint, NS29/38) |
| Receiver | 1 L spherical (ISO S35/20) |
| Shaft Dimensions | ID 18 mm × L 272 mm, TS29/38 |
| Vacuum Seal | Dual-material PTFE/Viton gasket |
| Air Filter | 0.2 µm disk filter (N-1100SD/SFD only) |
| Lift Travel | 100 mm (counterbalanced slide) + 150 mm (manual extension) |
| Bath Dimensions & Capacity | Ø230×100H mm (3 L, water-only) or Ø240×120H mm (5 L, water/oil) |
| Brand | EYELA |
|---|---|
| Origin | Japan |
| Model | N-1210BS-WB |
| Capacity | 5.4 L |
| Ultimate Vacuum | 10 hPa (≈7.5 Torr) |
| Rotation Speed | 5–280 rpm |
| Bath Temperature Range | Ambient to 180 °C (±1.5 °C for water, ±3 °C for oil) |
| Evaporation Rate | Max. 25 mL/min (water) |
| Condenser Cooling Area | 0.146 m² |
| Bath Dimensions | Ø240 × 120 mm (H) |
| Power | 1.2 kVA |
| Weight | 18 kg |
| Electrical Supply | AC 220 V, 50 Hz |
| Brand | EYELA |
|---|---|
| Origin | Japan |
| Model | N-1210BS-WB |
| Bath Temperature Range | Room Temp. to 180 °C (±1.5 °C in water, ±3 °C in oil) |
| Rotational Speed Range | 5–280 rpm |
| Evaporation Rate (Water) | Up to 25 mL/min |
| Bath Capacity | ~5.4 L |
| Bath Dimensions (ID) | 240 mm × 120 mm H |
| Bath Material | Aluminum with PTFE Coating |
| Heating Power | 1 kW |
| Vertical Travel | Motorized lift 110 mm + manual extension 130 mm |
| Condenser Type | Tilted dual-spiral coil |
| Flask Capacity | 1–3 L (evaporating), 1 L (receiving) |
| Vacuum Seal | PTFE sealing gasket |
| Cooling Water Inlet/Outlet | Ø10 mm |
| Power Supply | AC 220 V, 5.5 A, 1.2 kVA, 50 Hz |
| Operating Ambient | 5–35 °C |
| Dimensions (W×D×H) | 729 × 433 × 520 mm (750 mm with lift extended) |
| Weight | 18 kg |
| Brand | EYELA |
|---|---|
| Origin | Japan |
| Model | N-1300D |
| Rotational Speed | 10–310 rpm |
| Bath Temperature Range | RT+5°C to 90°C (water) / RT+5°C to 180°C (oil) |
| Temperature Accuracy | ±1.5°C (water), ±3°C (oil) |
| Max. Evaporation Rate | 25 mL/min (water) |
| Ultimate Vacuum | ≤399.9 Pa (≤3 mmHg) |
| Condenser Surface Area | 0.146 m² |
| Lift Stroke | 180 mm (manual, stepless) |
| Motor | Brushless DC |
| Cooling Water Inlet/Outlet | Ø10 mm |
| Power Input | AC 220 V, 50 Hz, 6.5 A, 1.43 kVA |
| Dimensions (W×D×H) | 578×352×645 mm (N-1300D-W) / 565×352×645 mm (N-1300D-WB) |
| Weight | 12.7 kg (N-1300D-W) / 13.3 kg (N-1300D-WB) |
| Bath Capacity | 4.3 L (SB-1300, stainless steel SUS304) / 5.4 L (OSB-2200, aluminum with PTFE coating) |
| Sealing | Dual-layer PTFE/Viton vacuum seal |
| Brand | EYELA |
|---|---|
| Origin | Japan |
| Model | N-1300S |
| Rotational Speed | 10–310 rpm |
| Bath Temperature Range | RT+5°C to 90°C (water) / RT+5°C to 180°C (oil) |
| Temperature Accuracy | ±1.5°C (water), ±3°C (oil) |
| Max. Evaporation Rate | 25 mL/min (water) |
| Ultimate Vacuum | ≤399.9 Pa (≤3 mmHg) |
| Condenser Surface Area | 0.146 m² |
| Lift Stroke | 180 mm (manual, stepless) |
| Motor | Brushless DC |
| Cooling Water Inlet/Outlet | Ø10 mm |
| Power Supply | AC 220 V, 50 Hz, 6.5 A, 1.43 kVA |
| Dimensions (W×D×H) | 736×352×504 mm (N-1300S-W) / 724×352×504 mm (N-1300S-WB) |
| Weight | 12.1 kg (N-1300S-W) / 12.7 kg (N-1300S-WB) |
| Bath Capacity | 4.3 L (SB-1300, stainless steel SUS304) / 5.4 L (OSB-2200, aluminum with PTFE coating) |
| Sealing | Dual-layer PTFE/Viton vacuum seal |
| Brand | EYELA |
|---|---|
| Origin | Japan |
| Model | N-1300V |
| Rotational Speed | 10–310 rpm |
| Bath Temperature Range | RT+5°C to 90°C (water) / RT+5°C to 180°C (oil) |
| Temperature Accuracy | ±1.5°C (water), ±3°C (oil) |
| Max. Evaporation Rate | 25 mL/min (water) |
| Ultimate Vacuum | ≤399.9 Pa (≤3 mmHg) |
| Condenser Surface Area | 0.146 m² |
| Lift Stroke | 180 mm (manual, stepless) |
| Power Input | AC 220 V, 50 Hz, 6.5 A, 1.43 kVA |
| Heating Power | 1.3 kW |
| Bath Dimensions (SB-1300) | Ø220 × 120 mm H, ~4.3 L (SUS304) |
| Bath Dimensions (OSB-2200) | Ø240 × 120 mm H, ~5.4 L (aluminum with PTFE coating) |
| Weight | 12.8 kg (N-1300V-W) / 13.4 kg (N-1300V-WB) |
| Overall Dimensions | 543 × 352 × 823 mm (W×D×H) |
| Cooling Water Inlet/Outlet | Ø10 mm |
| Sealing Material | Dual-layer PTFE/Viton vacuum seal |
| Brand | EYELA |
|---|---|
| Origin | Japan |
| Model | N-3100 |
| Rotational Speed Range | 10–140 rpm |
| Max. Evaporation Rate | 3.5 L/h (water) |
| Ultimate Vacuum | 2.6 hPa |
| Bath Temperature Range | Ambient +10°C to 180°C (±1°C in water, ±3°C in oil) |
| Heating Power | 3.5 kW |
| Temperature Control | PID |
| Vacuum Control Modes | Setpoint, Auto, Program, Pressure-Step |
| Bath Dimensions & Capacity | Φ360 × 200 mm, ~20 L |
| Bath Material | SUS304 stainless steel |
| Condenser | Vertical triple-coil, 0.5 m² cooling surface |
| Flask Capacity | 10 L spherical (neck Ø100 mm) |
| Collection Flask | 5 L spherical with drain valve |
| Sealing | PTFE mechanical seal |
| Lift Stroke | 145 mm (motorized) |
| Motor | Induction type, 60 W |
| Cooling/Inlet Port Diameter | 16 mm (×2), Solenoid Valve Port: 13 mm |
| Ambient Operating Range | 5–35°C |
| External Dimensions (W×D×H) | 930 × 480 × 1890 mm |
| Weight | ~96 kg |
| Power Supply | AC 200 V, 19 A, 3.8 kVA |
| Brand | EYELA |
|---|---|
| Origin | Japan |
| Model | PSL |
| Temperature Range | –40 °C to 0 °C / –80 °C to 0 °C / –80 °C to 20 °C |
| Temperature Stability | ±0.5 °C (PSL-1400) / ±1.0 °C (PSL-1810, PSL-2000) |
| Stirring Speed | 100–800 rpm |
| Heating Power | 250 W / 450 W / 750 W |
| Cooling Capacity | Air-Cooled Compressor System (R404A, R507A/R23 Dual-Circuit) |
| Tank Material | SUS304 Stainless Steel |
| Capacity | 2.1 L / 3.5 L / 8 L |
| Stirring Motor Output | 15 W / 25 W / 25 W |
| Safety Features | Leakage Current Protection, Overcurrent Protection, Overheating Prevention, Compressor High-Pressure Cut-off, Sensor Open-Circuit Detection, Self-Diagnostic Function (Heater Fault, Sensor Anomaly, Temp Deviation Alert), Compressor Delay Start |
| Brand | EYELA |
|---|---|
| Origin | Japan |
| Model | SD-1010 |
| Evaporation Capacity | Up to 1500 mL/h |
| Inlet Air Temperature Range & Accuracy | 40–200 °C (±1 °C) |
| Hot Air Flow Rate | 0.2–0.75 m³/min |
| Atomizing Air Pressure | 20–250 kPa (0.2–2.5 kgf/cm²) |
| Sample Stirring Speed & Volume | 100–1000 rpm, 50 mL–2 L (water equivalent) |
| Feed Pump Flow Rate | 150–1700 mL/h |
| Heater Power | 3 kW |
| Atomizer Type | Dual-fluid nozzle (standard orifice ID: 0.71 mm) |
| Collection Vessel | Borosilicate glass, 600 mL capacity |
| Dimensions & Weight | 700 W × 620 D × 1500 H mm, approx. 110 kg |
| Power Supply | AC 220 V, single-phase, 50/60 Hz, 21 A, 4.2 kVA |
| Brand | EYELA |
|---|---|
| Origin | Japan |
| Model | TVE-1100A / TVE-1100B |
| Temperature Range | TVE-1100A: RT + 5°C to 60°C |
| TVE-1100B | RT + 5°C to 40°C |
| Temp. Control Accuracy | ±0.2°C |
| Oscillation Speed | 100–1100 rpm |
| Amplitude | 3 mm |
| Gas Contact Materials | PTFE, Polypropylene, Viton, Silicone Rubber, Borosilicate Glass |
| Vacuum & Vent Ports | OD 10 mm |
| Drain Tube | OD 12 mm |
| Sample Vessel Compatibility | TVE-1100A — Centrifuge Tubes & Test Tubes (Straight, Flip-top, Screw-cap, Standard Tapered Joint) |
| Operating Ambient | 5–35°C |
| Dimensions (W×D×H) | 300 × 500 × 670 mm |
| Brand | EYELA |
|---|---|
| Origin | Germany |
| Model | LV3/11 |
| Max. Operating Temperature | 1100 °C |
| Internal Dimensions (W×D×H) | 160 × 140 × 100 mm |
| Chamber Volume | 3 L |
| External Dimensions (W×D×H) | 385 × 360 × 735 mm |
| Power Supply | 1-phase, 1.2 kW |
| Net Weight | 20 kg |
| Air Exchange Rate | ≥6 air changes/min |
| Heating Method | Dual-sided ceramic heating plates with embedded resistance wire |
| Insulation | High-purity vacuum-formed fiber modules |
| Safety | EN 60519-2 compliant overtemperature protection (Class 2), adjustable cutoff temperature |
| Control System | Controltherm MV software-enabled process monitoring and data logging |