FluidicLab
Filter
Showing all 4 results
| Brand | FluidicLab |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | CCS-01 |
| Instrument Type | Automated |
| Reservoir Volume | 15 mL |
| Dimensions (H×W×D) | 18 × 17.7 × 16 cm (including reservoir) |
| Temperature Control Range | 15–40 °C |
| Minimum Perfusion Volume | 1 mL |
| Flow Rate Range | 0.8–400 µL/min |
| Independent Fluid Channels | 2 or 4 |
| Tubing Compatibility | Tygon® L/S 0.38 mm ID / 0.8 mm OD |
| Pressure Limit | ≤0.1 MPa |
| Power Supply | AC 220 V, 50 Hz, <10 VA |
| Operating Temperature | 15–40 °C |
| Weight | 1.5 kg |
| Brand | FluidicLab |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Region of Origin | Domestic (China) |
| Model | Flow Cell |
| Price | USD 1,350 (approx.) |
| Instrument Type | Manual |
| Dimensions (L×W×H) | 60 × 65 × 15 mm |
| Brand | FluidicLab |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | OEM Producer |
| Region of Origin | Domestic (China) |
| Model | LNP-B1 (with Luer Fitting) |
| Chip Material | Cyclic Olefin Copolymer (COC) |
| Chip Type | Droplet-Generation Microfluidic Chip |
| Dimensions (mm) | 62.2 × 41.3 |
| Channel Width | 350–700 µm |
| Max Operating Pressure | 50 bar |
| Total Fill Volume | 8.22 µL |
| Mixing Structure Volume | 2.09 µL |
| Recommended Total Flow Rate | 16 mL/min |
| Maximum Total Flow Rate | 40 mL/min |
| Compatible Instruments | FluidicLab LNP-S1 & LNP-S2 Intelligent Lipid Nanoparticle Synthesizers |
| Application Range | Total Synthesis Volume 0.4–40 mL |
| Flow Regime | Medium-volume, medium-flow-rate LNP formulation |
| Brand | FluidicLab |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | OEM Producer |
| Product Category | Domestic |
| Model | PDMS-HTS-80 |
| Price | USD 185 (excl. VAT & shipping) |
| Chip Material | Covalently bonded PDMS microchannels on borosilicate glass substrate |
| Chip Type | Step-emulsion droplet generation chip |
| Channel Width | 160 µm |
| Nozzle Geometry | Parallel stepped orifice array (188 independent units) |
| Droplet Diameter Range | 80–100 µm |
| Aqueous Phase Flow Rate Range | 10–1000 µL/min (CV < 5% under stable pressure control) |
| Substrate Dimensions | 75 × 25 × 2 mm (glass), Chip Active Area: 62 × 19 × 2 mm |
| Surface Treatment | Hydrophobic silanization of PDMS channels |
| Operational Configuration | Dual-inlet/dual-output symmetric layout (Chip I: Inlets ①/② → Outlet ③ |
| Chip II | Inlets ④/⑤ → Outlet ⑥) |